I have no doubt finding parts for your Chevy is a challenge, and we do have a gooseneck for you. While the part you mentioned won't fit as that is for standard trucks (as opposed to a flatbed), there is indeed a weld-on gooseneck that will work for you:
- B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks # BWGNRK1500
The # BWGNRK1500 was designed specifically for use in flatbed trucks, and is exactly what you'll need to add a gooseneck. view full answer...
Hellwig lists the Hellwig Rear Anti-Sway Bar # HE36MR as the correct fit for a 1998 Chevy K2500. As for fitment with the staggered shocks, you shouldn't have any issues and can even see this setup in the attached installation picture below.
The only other issue would be fitment with your air springs. The bar is going to sit just behind the axle mount so it's really going to come down to just how far the bottom mounting bracket of your air spring sticks out. Based on the compatible Air... view full answer...
The DeeZee Red Label Truck Bed Toolbox, part # DZ8170DLB, will fit your 1998 Chevrolet C/K Series Pickup. It is designed to fit both the 6-1/2 ft and 8 ft beds without stepside feature. This is a low profile toolbox that sits 2 inches above the truck-bed rails allowing plenty of visibility. It has 2 locking stainless steel paddles and has gas shocks which help provide a smooth lifting and lowering of the lid. view full answer...
The proper Longview Slide-On mirror for the 1998 Chevy C/K would be part # CTM1200, which fits mirrors that look like the one shown in the photo I've provided.
The # LVT-1300 mirror you referenced is a fit for the 1995-98 compact GM trucks/SUV's like the S-10, Sonoma, Blazer, Envoy, Jimmy, or Olds Bravada, therefore it wouldn't fit on your full sized C/K truck. view full answer...
Some of the 1994 Chevrolet K2500 pickups came with a deep bumper and others came with a more common standard or step bumper. I have included a link to an FAQ page on bumper types. Take a look at the page and you will be able to tell what bumper is on your truck. view full answer...
The B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1000 will fit your 1996 Chevy C/K3500 long bed dually just fine!
The only thing that you'll need different for the dually setup is you need to get the Extended Latch Pin Handle # BWGNXA1800 so it's easier to access in the wheel-well. view full answer...
The B&W Gooseneck Hitch # BWGNRK1000 is a confirmed fit for your 1998 Chevrolet C/K Series Pickup that has an 8-foot bed. This hitch does not require drilling for installation and it includes a mounting kit. The written instructions and a review video for this product are linked. I also included an informational article on goose neck hitches that may be of interest.
For a wiring harness you can use Draw-Tite # 20023. view full answer...
Yes, the Curt gooseneck trailer hitch # C61503-52 is listed as a fit for your 1995 Chevy C/K series truck with 8 foot bed. The only exception is that it will not fit if the frame width is 34 inches. This is measured from the outboard side of one frame rail to the outboard side of the other rail. view full answer...
According to Draw-Tite, their # 9465-40 Hide-A-Goose Gooseneck Hitch is a fit for your 1994 Chevy K1500 w/ the 8 foot bed.
If you don't already have the 7-way trailer connector installed in the truck bed, you can do so with part # 20023.
If you click the provided links, you can see installation details for the hitch and the wiring I recommended. view full answer...
I spoke with my contact at Reese regarding the Replacement Head and Shank for Reese Weight Distribution Systems - Trunnion Bar, # RP54980. He stated that it will work with your existing spring bars. I have included a link to the installation details for this part below. view full answer...
The K Source universal clip-on towing mirror # KS3891 fits on stock mirrors with a gap or lip between the glass and the mirror housing. I have linked a video that provides an example of the type of stock mirror the K Source towing mirror will fit.
We also carry custom fit slip-on towing mirrors that fit your 1994 Chevy pickup. Take a look at # CM10200. This is a set of custom fit towing mirrors. As long as your stock mirrors look like the one in the picture I have included you can use... view full answer...
Adding a front mount hitch like the Curt # 31042 to your 1998 Chevy Silverado 4x4 is a very common way to utilize a plow. As long as your Meyers plow is designed to be used with a front mount hitch this is a great solution, but since it sounds like you're wanting to fabricate your plow I can't really say that it will be safe. The front mount hitch will fit your pickup and hold up just fine but I'd be concerned about the plow holding up since you'll be changing how it was designed to be... view full answer...
According to Derale, the D14207 will be compatible with the 4L80E transmission on your 1999 K2500 if you have 2-1/2 inches of clearance under your existing pan without hitting the cross member to accommodate the greater depth of the Derale pan. view full answer...
According to Draw-Tite, the Front Mount Receiver, # 65005, will fit your 1994 Chevy K2500 4x4. I have included a link to the installation details for you to view. For any accessories you may put in the hitch, I recommend the Trailer Hitch Receiver Lock, # e98882, to secure them in the hitch and deter theft. I have included a link to a video review of the lock for you. view full answer...
Your 2000 Chevy 3500 is not considered to be a medium duty truck so Buyers Products Hitch Plate with Pintle Mount # 3371809038A would not be the best option for you. For the 3500 we have # 3371809035A. But since they have to be welded on and bolted on you could technically use either one. I have linked videos of each for you so you can see how they compare to each other.
Capacity is given based on several factors including the vehicle it is being installed on, the design of the plate,... view full answer...
The Universal Fifth Wheel Install Kit, part # RP30035 will work great for your 1995 Chevy 1500. I have provided a link below to the installation instructions, the information pertaining to your model year can be found on page # 5. view full answer...
The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" Item # 31042 is designed for the 1994 Chevrolet C/K 3500 Series trucks. The easiest way to determine if Curt Front Mount Receiver is compatible is to measure center of the mounting holes on one frame rail across to the center of the opposite side. The measurement for the mounting holes on this receiver are 30-1/2 inches view full answer...
The Westin Fey Surestep Rear Bumper # 76001 is a universal bumper replacement that can fit on a variety of vehicles. Since a custom installation kit is not available for this bumper you will have to use the existing mounts or have some fabricated.
If you would like a bumper that does have an installation kit for your truck I recommend the Westin Fey Surestep Deluxe XLT Rear Bumper # 21007-92230. This is almost identical to the # 76001 but has a higher capacity. Keep in mind, this does... view full answer...
The B&W Universal Base Rails and Installation Kit # BWRVR3200 will allow you to install your Reese Classic 5th wheel hitch on your 1990 Chevrolet K2500 pickup. These rails have the industry standard mounting locations which allows them to fit with most all 5th wheel hitches.
I have included an image with the dimensions for the mounting holes if you wish to verify your hitch uses the same holes. In the event the mounts are different please let me know. view full answer...
The mounting brackets on the Fold-Down Gooseneck Trailer Hitch with Installation Kit # 8339-4440 are what will not work on the Crew Cab. The brackets mount around the frame to the rear of the axle which is different on the Crew Cab models of you 1993 Chevrolet C/K Pickup.
The B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1000 uses a different type of mounting brackets that will work on both frames. This will bolt to the frame rather than around the frame. view full answer...