We do have trim rings for 14" wheels # PXQT544CLO and 15" wheels # QT655CLO. Unfortunately we do not have anything available for a 13" wheel at this time.
We do carry baby moon hub caps like the # AM90086, which would fit the Dexstar 13" Wheel # AM20212 that you were looking at. view full answer...
We do have two 2-5/16-inch hitch balls that have a 2-inch diameter shank that is also 3-1/2-inches long; both appear on the linked page. B&W part # BWHB94009 that you referenced is one and the other is Curt item # C40088. Please note that both of these use a coarse thread, either 4-1/2 or 5 threads per inch; both also include a matching lock washer and nut.
All balls in the 2-5/16-inch size appear on the linked page and some of these have fine threads but the two above are the only ones... view full answer...
We do offer 12 x 2-inch electric brake assemblies with a 4-bolt mounting flange. Dexter parts # 23-106-09 and # 23-105-09 are right- and left-hand brake assemblies that have dual mounting hole patterns, both 5-hole and 4-hole. These brakes are rated for use with 6000-lb axles. view full answer...
We do offer a B&W hitch for your 2000 Chevy C/K Series truck. Due to the frame width you mention, you'd want to use the B&W Class V hitch, part # BWHDRH25124 which is designed for pickup trucks.
The B&W Class V receiver hitch you referenced, part # BWHDRH25198 is for Cab and Chassis trucks with a 34 inch wide frame (measured outside to outside) only, so it wouldn't fit your truck. view full answer...
I may be able to provide a solution for you here, but we do not have any wheels that are 15" diameter and 5" wide; additionally since the wheels we carry are designed for use on trailers, almost all of them will not have an offset, so you will need to take that into consideration when choosing one for your truck. With that said, we do have wheels that are 15x6 in a 6 on 5.5" bolt pattern, which would require the use of a tire that is 205, 215 or 225 wide like the # AM10303 -but you will... view full answer...
We do not offer any wiring adapters to convert a 12-pin female connector on a military vehicle to a standard RV-style 7-way like # 37185 or a 4-pole like # 18252. But you can install a different type of trailer socket on the truck by hardwiring one.
Based on the information I could find about your military connector the wires have letter codes on them and carry the following functions common on most trailers:
J is the right turn signal
B is left turn signal
E is tail lights
D is ground
K... view full answer...
The best way to determine which line on a transmission cooler is the return line from the radiator is to use the following procedure:
1. Start engine while engine is cold
2. Place transmission shift lever in drive for no more than 10 seconds
3. Place in Park, stop engine, and remove keys
4. Identify the oil return line by feeling both oil lines. The coolest line is the oil return line.
On the aftermarket transmission cooler the ports are not input specific or output specific. It is not... view full answer...
I have a few different dual hitch extensions that you can choose from that will a 2 inch receiver hitch opening.
The Malone Dual Hitch Extender, # MPG544, measures 12-3/8 inches from the center of the rear hitch pin hole to the end of the receiver. This hitch has two 2 inch receivers. The upper receiver is designed to carry a towing accessory and the bottom receiver will let you tow a trailer.
Curt offers a Dual 2 Inch Receiver Tube, # D-192. This dual hitch extender will give you up... view full answer...
The 265/75-16 spare tire on your horse trailer will have an overall diameter of approximately 31.6-inches. For reference, the way to calculate this dimension based on standard tire size designations is explained in the linked article.
I have included a link to our main page for all tire covers that fit 32-inch tires. You have many color options. A good cost-effective choice is the Classic Accessories Universal Fit Spare Tire Cover # 052963753875. view full answer...
To install your Husky fifth wheel hitch on your 1984 Chevy, you would need the Reese Universal 5th wheel install bracket/rail kit, part # RP30035.
If you do not have a trailer connector installed in the bed of your truck, you can use # 20023. I have linked you to an install video showing the 20023 being installed on a later-model Silverado. The procedure for your truck will be very similar.
Unfortunately, due to the age of your vehicle, I do not have any video footage of a fifth wheel... view full answer...
We do not manufacture/make the BlackMax covers. They are made by Extang and the replacement covers/tarps like the Replacement Tarp for Extang BlackMax Soft Tonneau Cover # EX1915 that you were looking at are provided to us from Extang as replacement parts.
If you are needing a replacement tarp/cover and you can let me know the model number of the cover that you have, I can see if we have the correct replacement or reach out to Extang to see if it is available. view full answer...
For your 1989 Chevy C/K Series Pickup I recommend the Curt Class III Trailer Hitch # 13942. This will fit your truck with the roll pan and the only slight modification you will need to do on the bumper is to cut in the license plate area so the hitch receiver can be accessed. Also please note that this hitch will only fit the 1500 models (there is not a hitch available for the 2500/3500 models with a roll pan bumper).
This is a heavy-duty Class III hitch that will provide you with a 2... view full answer...
We do not carry a aftermarket spare tire repositioner that you may need to use when installing the Curt Trailer Hitch Receiver # 13942 on your 1989 Chevy C/K Pickup. view full answer...
We do offer some light bars brackets for a 1995 Chevy C/K series from Carr that will accommodate light bars up to 50 inches long. For a sliver powder coated steel, use part # CARR210114 bar and the # CARR223412 mount kit, for polished stainless use part # CARR210112 for the bar and # CARR223412 for the mount or for black powder coated steel, go for part # CARR210111 for the bar and # CARR223411 for the mount. view full answer...
We have the universal bumper mounted trailer hitch from Curt which is part # E-3S. It's not a confirmed fit for your 1990 Chevy C1500 but I attached a picture that shows it's mounting hole dimensions. view full answer...
Yes, Fulton does make a black plastic fender, part # F008585 that will accommodate 15 inch tires. We carry it on our site and I have added a link to it below. It measures 40 inches long, 12 inches tall and 9 inches wide. view full answer...
We do offer one option in a louvered 5th wheel tailgate for the 1996 Chevrolet C/K Series Pickup. Stromberg-Carlson offers their 100 Series 5th Wheel Tailgate # VGM-88-100 that features heavy-duty steel tube construction and that allows for an improved field of vision when driving and reduced drag for better gas mileage. This item is USA-made. view full answer...
You have a 2-3/8 inch O.D. pipe so you might want to look at #84 Spindle, # TRU84FR, which has a 2 inch O.D. at the weld point and has a 1750 lb. capacity, so two spindles will give that axle 3,500 lb capacity.
The #42 Spindle, TRU57FR which has a 2.25 inch O.D. at the weld point and is rated for 5,200 lbs to 7,000 lbs axles. The total capacities of the spindles are only valid if installed correctly and the axles are not broken or damaged in any way.
The TruRyde #84 Spindle, # TRU47FR,... view full answer...
We offer a number of aftermarket Fey bumpers for your 1985 Chevrolet C/K Series Pickup so long as it is NOT a flareside/stepside type bed. These appear on the page I linked for you and they include 3 chrome-finish models as well as silver and black bumpers too.
The chrome bumper parts we can offer you are:
Westin Fey Surestep Deluxe XLT # 21007-92230
Westin Fey Surestep Rear Bumper # 21002-92230
Westin Fey Diamondstep Rear Bumper # 21000-92230
All of these bumpers offer no-drill installation... view full answer...
Go To Results