Expert Answers about Chevrolet Blazer

• Recommended Black Running Boards for a 2019 Chevy Blazer
• The AeroTread Running Boards with Custom Installation Kit part # AA2061041 are what I recommend for a 2019 Chevrolet Blazer. These running board mount right under the cab for a flush design and they have an all black finish. The brackets which are included are a direct fit and don't require any drilling. I checked with all our our aftermarket running board manufacturers and these were the only ones in all black.
  view full answer...


• Best Towing Mirror Extensions For a 2024 Chevrolet Blazer
• I recommend the CIPA Universal Towing Mirrors # 7070-2 as the best option for your 2024 Chevrolet Blazer. These mirrors have adjustable arms which will conform to your mirrors and help to reduce vibration. The simple strap system is easy to use and reduce the chances of damage caused by other more complicated strap systems. You can also get either Replacement Straps # 11952STRAP or a single Mirror # 7070 should something happen to one of the mirrors.
  view full answer...


• Replacement Spindle for 3,500 lb Trailer Axle with 2-3/8 inch Diameter
• Since you have a 2-3/8 inch diameter axle and that indicates you have a 3,500 lb axle the 84 spindle like the part # TRU24FR will work great as that is what capacity this axle was designed for. Installing spindles is a precision job that should only be done by a welder with the needed jigs to get the spindle completely square to the axle.
  view full answer...


• Will Trailer Hitch From 1999 Isuzu Hombre Fit 2001 Chevy Blazer
• The frames and designs of the 1999 Isuzu Hombre and 2001 Chevy Blazer are different enough that the same trailer hitch will not fit both vehicles. You will need a new hitch for your 2001 Chevy Blazer. For a Draw-Tite hitch that is confirmed to fit I recommend the Class III Max Frame Round Tube Receiver Hitch # 75079. This custom hitch will use existing holes in the Blazer's frame for a no-drill installation. It will provide you with a 2 inch receiver opening and it has a 3,500 pound towing...
  view full answer...


• Recommended Trailer Hitch Receiver and Wiring Harness For a 2024 Chevy Blazer RS
• I recommend our etrailer Trailer Hitch Receiver # e36YR for your 2024 Chevrolet Blazer RS. I prefer our receiver as the matte black finish provides a clean, factory appearance. This will also hide behind the removable rear fascia cover when not needed. The Curt T-Connector Vehicle Wiring Harness # C56326 will connect to the factory wiring and give you a 7-way connector. This is a connector most commonly found on larger trailers but you can use an Adapter # PK12716 for smaller trailers...
  view full answer...


• Recommended Trailer Hitch Receiver and Wiring Harness For a 2023 Chevrolet Blazer
• Yes, we have our etrailer Trailer Hitch Receiver # e36YR which fits all trims on your 2023 Chevrolet Blazer besides the premier trim. I prefer this receiver over others as it uses the matte black finish which best accents the OEM fascia trim and I find is more durable. I recommend installing either the 4-Way Flat T-One Vehicle Wiring Harness # 118720 or 7-Way T-One Vehicle Wiring Harness # 118276 when you install the receiver. The 4-way harness is best with Auxiliary Lights # C53201 and...
  view full answer...


• Base Plate Recommendation for 1983 Full-Size Chevy Blazer
• You mentioned that you have an Blue Ox Avanti tow bar, so I guess you were wanting to reuse that tow bar if possible. I spoke with Blue Ox and that item has been out of production since 2006. We are not going to be able to make a recommendation that includes using that tow bar as we do not have any technical information to work from. The only base plates we have to fit your 1983 full-size Chevy Blazer are the Roadmaster # 108-1 for crossbar Style with Fixed Arms. I would pair that with...
  view full answer...


• How to Order 20 Feet of 10 Gauge Jacketed Dual Wire
• Since you want 20 feet of jacketed 10 gauge wire with two wires in it you'd actually want to order a quantity of 20 of the part # 10-2-1 which is two 10 gauge wires jacketed together sold by the foot. Basically whatever quantity of this you order you'll receive in total feet without any cuts.
  view full answer...


• Trailer Hitch for a 1987 Chevy Blazer Monster Truck with Deep Drop Bumper
• Deep drop bumpers are about 10 inches tall. It looks like in the picture you have submitted the vehicle already has one. The one hitch for your 1987 Chevy Blazer # 75129 is designed so that the receiver fits right under the stock bumper. It would not work with a deep drop bumper. So what I recommend is a weld-on hitch, # 41990-16, because the tall brackets will allow you to mount the hitch lower to compensate for the bumper. I recommend having a professional welder perform the installation. To...
  view full answer...


• 2019 Chevy Blazer Best Roof Rack Recommendation
• I have the perfect solution for you with the Thule WingBar Evo roof rack system! This setup uses aerodynamic crossbars that cut down on wind noise and drag, and the updated style is designed to compliment the body style of newer vehicles like your 2019 Chevy Blazer. Here are the parts you'll need: 53" WingBar Evo Crossbars - Black # TH711420 or Silver # TH711400 Evo Clamp Feet - # TH710501 Fit Kit - # TH48FE Lock Kit - # TH450400 (optional) One of the best things about the WingBar Evo...
  view full answer...


• Flat Towing Base Plate Kit for 2021 Chevy Blazer with 3.6L Engine
• By twist lock couplers, I'm assuming you're speaking of a flat towing base plate kit. A Saturn vehicle and a Chevy Blazer would use a different base plate kit, so you'll need to get a new kit. As long as your Blazer doesn't have the skid plate, the Roadamaster # RM-523204-5 kit will work great for you. As far as a wiring goes, you can piece together a kit using the # RM-794 diodes, a length of # 16-4B-1 wire long enough to reach the vehicle taillights from the front bumper, a # RM-910030-7...
  view full answer...


• What is Difference Between Suspension Kit for Tandem-Axle Trailers and K71-359-00
• The Suspension Kit part # AP233 is more of a basic equalizer and shackle kit that uses standard thickness shackles. The Dexter Heavy Duty Kit part # K71-359-00 uses shackles that are very thick, comes with bronze bushings and all of the bolts are wet bolts which means you can easily grease them. If you want something that is the best and toughest option go with the Dexter. If you are trying to save some money and don't think you'll need the super heavy duty components go with the # AP233...
  view full answer...


• Recommended Trailer Hitch Receiver For 2000 Chevey Blazer ZR2
• Yes, the hitches compatible with a 2000 Chevy Blazer will fit all models of Blazers for that model year including the ZR2. For you application I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13020. This is a square tube design that is extremely sturdy and easy to install. If you will be towing with this trailer hitch receiver, I recommend the Curt Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55411 which will let you quick-splice into your...
  view full answer...


• Parts Needed to Install InvisiBrake on 2022 Chevy Blazer
• To use the Roadmaster Invisibrake part # RM-8700 in your 2022 Chevy Blazer you will need the Stop Light Switch # RM-751483 and you'd be set. Everything else you already have unless you were planning on keeping the components in the Wrangler and were wanting to have a second vehicle you could flat tow. In that case you would need the Invisibrake Second Vehicle kit part # RM-98700 which comes with just the components needed for your Blazer. We have not had chance to install this on a Blazer...
  view full answer...


• Flat Towing A 1975 Chevrolet Blazer
• You will need a few items to flat tow your 1975 Blazer with the 2” hitch receiver on your 2004 Safari motor home. First you will need a base plate kit made specifically for your vehicle. The Roadmaster # 122-1 crossbar style kit is a perfect fit. Next you will need a tow bar. I recommend the Roadmaster # RM-522 “Falcon” All Terrain and Non-Binding tow bar rated for 6000 pounds. A non-binding tow bar will let you easily disconnect your tow bar even if your coach and towed vehicle is not...
  view full answer...


• Parts Needed to Flat-Tow a 1997 Chevrolet Blazer
• You will need to check with the manufacturer and/or your vehicle owners manual for instructions on the proper procedure for towing your 1997 Chevrolet Blazer because some vehicles must be equipped with a transmission lube pump, an axle disconnect, drive line disconnect, or free-wheeling hubs before they can be towed. If your Blazer can be flat towed you will need a tow bar, base plates, safety cables, wiring for lights, and a supplemental braking system as required by law. The Blue Ox...
  view full answer...


• Can Blue Ox Patriot Work with 2020 Chevy Blazer
• Blue Ox has tested their Patriot part # BLU37TR and have found that it fits and works great in your 2020 Chevy Blazer. I am not sure why we have "not power assist compatible" listed in the description of the Patriot but if for sure does work with the braking style of your Blazer.
  view full answer...


• Recommended 7-Way Wiring Harness for 2021 Chevrolet Blazer RS
• In order to get a 7-way connection on your vehicle you should be able to use the factory connector you are talking about which has the connections for your current 4-way and also a 7-way. I recommend the # 118276 Tekonsha T-One Vehicle Wiring Harness. This custom wiring harness will plug into the OEM wiring harness where your existing 4-way is plugged in right now. No additional modification should be needed for the 7-way connection to work properly. I recommend the Tekonsha over other...
  view full answer...


• Trailer Wiring Harness that Fits 2003 Chevy Blazer
• We have trailer wiring harnesses that fit your 2003 Chevy Blazer but none of the kits are custom fit as that style of wiring isn't available for your vehicle. Instead you'd have to hardwire in a 4-way with a kit like the part # 18252 and you'd be set. I attached an install video for this on a similar 1996 Blazer for you to check out as well.
  view full answer...


• Trailer Hitch Mount Bike Rack Recommendation that Prevents Bikes from Rocking Back and Forth
• A 4 bike rack may be more difficult to load just 2 bikes on because instead of arranging the bikes beyond one set of cradles, you would have 3 when loading the first bike, and 2 when loading the second. Most bike racks, including the Thule Hitching Post Pro, # TH934XTR, have anti-sway cradles that work to prevent the bikes from making contact with each other. Contact while loading the bikes can be minimized by taking care when loading. But what I recommend is a platform style bike rack...
  view full answer...