The Timbren Rear Suspension Enhancement System # TGMRYS4 can utilize the Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing # A25723-90AH00 and Timbren 1/2" Spacer for Raised Frame Vehicles # TA25722-90P00. The hardware will simply need to be obtained locally as the bolts that come with the kit don't allow for the length the spacers add. The hardware that comes with the kit are zinc plated 3/8 x 1-1/2 inch UNF Grade 5 bolts so you will want that same grade and diameter but a length... view full answer...
As every 2019 Cadillac Escalade left the factory with a trailer hitch receiver no aftermarket companies fabricated a receiver for it. You will either need to find a factory receiver or we have the Curt Weld-On 2" Receiver for Custom Fabricated Hitches # E17. This will allow you to have a receiver fabricated to fit your Escalade. view full answer...
Yes, the Curt Trailer Hitch Receiver # C13422 is a confirmed fit for your Escalade and it happens to be the easiest of the 3 available hitch options to install we've discovered.
An important install note to be aware of too though is this hitch does not fit models with canister on rear passenger side frame rail. The hitch will fit EXT models. No drilling is required for installation.
Included are installation instructions as well for your reference. view full answer...
The correct Konig Self-Tensioning Tire Chains for a 2014 Subaru Legacy with P225/50R17 tires is part # TH00023100. These chains have a self tensioning mechanism to maintain the correct level of tightness, nylon bumpers to protect the vehicle's wheels, and a class s rating for the best clearance. They will need to be installed on the front tires only.
Please note, the owner's manual may have other stipulations for using tire chains you'll want to review before use. view full answer...
I see you were looking at the Timbren and Firestone Coil-Rite for your 2004 Cadillac Escalade EXT. You will want to use either the Timbren Rear Suspension Enhancement System # TGMRG25C or the Firestone Coil-Rite # F4108 on your Escalade. These systems are both confirmed to fit your vehicle. The Timbren I find work best if they are always hauling a heavy load. So if you are only using it for carrying additional weight in your bed or hauling a trailer this is the better option for the most... view full answer...
To take full advantage of the towing capacity of your 2000 Cadillac Escalade the Curt hitch part # C14029 would be a great option as it has a capacity of 10,000 lbs. The price for this hitch is available at the product link down below. view full answer...
The K-Source Custom Towing Mirror Set # KS80900 will fit your 2007 Cadillac Escalade if it has manual mirrors or heated power mirrors. It will not fit if your Escalade has extendable or telescoping mirrors.
These 19-inch snap-on K-Source towing mirrors will provide a greatly expanded view of the road and your 20-foot trailer and install easily without tools. The 5-1/2-inch x 4-3/4-inch mirror face is manually adjustable to suit your requirements.
I have included for your reference a... view full answer...
I can tell you how to install a brake controller but the # 3015-P adapter will not work with the 2009 Escalade.
If your Escalade has a factory 7-way towing package, there will be a bundle of 4 wires taped underneath your dash: red, dark blue, light blue, and white. The part you actually need is # 7894. There is no plug underneath the dash on newer GM/Chevy/Cadillac vehicles. You will wire the Tekonsha connector to the wires underneath the dash.
I have included two links to guide you through... view full answer...
I have the perfect brake controller for your 2011 Cadillac Escalade in the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195. Unfortunately, they do not make a plug in adapter for your vehicle therefore, you will want to hardwire the included wiring harness into the your vehicle's factory wiring harness.
To do this, you will only have to connect 4 wires. The black wire from the back of the brake controllers wiring harness will need to be attach to a 12-volt power circuit, the... view full answer...
I do have a universal towing mirror option that may work for you but unfortunately we have not had a chance to confirm the fitment of one on your 2015 Cadillac Escalade yet. The towing mirrors for a 2015 GMC Yukon will not work.
The best option I have for you is the K-Source Universal Towing Mirror part # KS3891. The K-Source Universal Towing Mirror is designed to work with factory side mirrors that are between 4-1/2"-11-1/2" tall. As long as your factory side mirrors fall between this... view full answer...
The K-Source Universal Towing Mirror # KS3891 will fit fine on the stock mirrors on your 2016 Cadillac Escalade as long as there is a gap between the mirror housing and the actual glass surface. This gap is where the mounting arms on the K-Source mirrors will grab on.
This mirror will fit on both driver and passenger side mirror housings so you'll want to order a quantity of 2 to equip both sides of the Escalade.
Our customers that purchased these mirrors have rated them highly. Please... view full answer...
I am not aware of any plug-in adapter which will let you use a Tekonsha brake controller with a Curt hardwire harness. Therefore, the Curt plug will need to be cut off and then the Tekonsha one spliced on in order to use a Tekonsha brake controller like the Tekonsha Primus IQ Trailer Brake Controller part # TK90160 which is what I recommend. view full answer...
Both an air bag system and a Timbren system are meant to enhance the performance of your existing vehicle suspension. Either system is meant to be used in conjunction with other components of your suspension system, but are not intended to be a stand alone replacement of your existing suspension.
A Timbren system works to replace your existing jounce stop on either the front or rear suspension. Timbren systems work to level the load on your vehicle, increase stability and handling, decrease... view full answer...
The Blue Ox Alpha 2 tow bar # BX7380 is suitable for use with the Blue Ox base plates # BX1716 on your 2016 Cadillac Escalade ESV. The tow bar is rated for 6500-lbs which is more than the curb weight of your Escalade; that curb weight ranges from abut 5700-lbs to about 6000-lbs.
Should you ever need a new tow bar I would recommend one with a higher weight capacity just so that it will give you a bigger safety margin. The Blue Ox Avail tow bar # BX7420 is the one I recommend since it is... view full answer...
You will not have any issues with your hatch door clearing the Thule Helium Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount, part # TH44VR, while it is mounted on your 2022 Cadillac Escalade.
I have included a video review link below. view full answer...
CIPA Replacement Driver Side Mirror # CM27372 will fit the 2005 Cadillac Escalade that has manual mirrors, but since you noted your Escalade has heated/powered mirrors you would lose those functions if you installed this mirror. For a replacement heated/powered mirror use part # KS62062G for the driver's side and part # KS62061G for the passenger side.
If your mirrors have LED turn signals built in to them then instead use parts # KS62134G and # KS62133G. These can be painted to match... view full answer...
The 2018 Cadillac Escalade with flush rails only requires a 59" bar. Since you want to install two of the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading Item # TH898, and they require bars that span past the mounting feet I recommend the Thule WingBar Evo Crossbars - Aluminum - Silver - 60" Long - Qty 2 Item # TH711500 and the Rapid Podium Feet for Thule Crossbars - Fixed Point - Qty 4 Item # TH460R. The crossbars are aluminum construction and have a 220lb... view full answer...
Sure thing, and there are a number of other parts you'll need to flat tow your 2023 Cadillac Escalade with your Blue Ox Apollo Non-Binding Tow Bar # BX7470.
Those parts include base plates, wiring, a battery disconnect, and a supplemental braking system. Please note there are differences in some parts depending on if your '23 Escalade has a gas or diesel engine, and also that base plates only fit 4WD models (there are no fits for 2WD models). I'll go ahead and list the parts out for you... view full answer...
The Andersen Ultimate Connection, part # AM3200, works with any fixed fifth wheel pinbox. It doesn't work with rotating pin boxes.
So as long as your Lippert 1621 is a fixed pin box, like parts # LC1191191, # LC1191151 and # LC1387882 it'll work just fine for you. view full answer...
When the Rola Tilting Enclosed Cargo Carrier # 59109 is installed on a vehicle the plastic portion of the carrier will be far enough away from the exhaust of a vehicle that it would not get too hot and melt. Check out the picture I attached to get an idea how far away it sets.
We have not had any customers come back and say they had any issues with the exhaust. view full answer...
Go To Results