The towing capacity of a 2000 Cadillac DeVille is 2,000 lbs without the factory tow package or 3,000 lbs with the factory tow package. I have attached a list of parts below that will be needed to tow a trailer.
Draw-Tite Trailer Hitch Receiver part # 36287
Wiring part # C59496
Drawbar for 1-1/4" Hitch part # 36071
2" Hitch Ball part # 19258 view full answer...
Yes, this Curt Trailer Hitch Receiver with Drawbar, part # 12058, will work on a 2002 Cadillac DeVille as it is designed to work on 2000-2005 Cadillac DeVilles.
You may also be interested the following products to complete your towing setup:
Wiring for the 2005 DeVille by Cadillac, part # C59496
Hitch Ball with 2 inch Diameter and Medium Shank, 3,500 lbs GTW - Stainless Steel, part # A-82
Hitch Ball with 1-7/8 inch Diameter and Medium Shank, 2,000 lbs GTW - Stainless Steel, part # A-80 view full answer...
If you have the Draw Tite Hitch part # 36287 without mounting hardware and you are looking for the hardware to install it on a 2005 Cadillac DeVille I have a solution for you.
You will need to go to the product page for the Replacement Hardware Kit part # RHK, select Draw Tite from the drop down menu, enter the part number 36287 in the box and hit add to cart and we will ship you out the correct components needed to install the hitch. The pricing is available on the product page.
I attached... view full answer...
You must abide by the weight capacity of the hitch or vehicle, whichever is lowest. Adding air shocks or springs will not increase the capacity of the hitch and, unless Cadillac has specified, it will not increase the towing capacity of the DeVille.
Check the owner manual to see what the towing capacities of the car are. This Curt hitch, part # 12058, will fit a 2002 Cadillac DeVille and it has gross trailer weight capacity of 3500 pounds and a maximum tongue weight of 350 pounds. If the... view full answer...
For your 2004 Cadillac DeVille, I recommend the Draw-Tite Class II Frame Receiver Hitch # 36287. This Class II trailer hitch is custom-designed and confirmed to fit your vehicle. It has a 1-1/4 inch receiver opening and a 3,500 pound towing capacity, although you will also want to check the capacity for the vehicle itself as listed in the owner's manual. I recommend this hitch over the Curt alternative also confirmed to fit your vehicle because unlike Curt, Draw-Tite does not require the... view full answer...
The only trailer hitches available for the 2004 Cadillac DeVille are Class II trailer hitches. I have included a link to them for you to the right. I am assuming you need a Class III hitch because you need the 2 inch receiver for an accessory of some kind.
You may be able to still use a 2 inch accessory by using an adapter, # HTAD, but keep in mind that the use of an adapter reduces the tongue weight capacity of the trailer hitch by 50 percent.
Curt hitch # C12058 has the highest tongue... view full answer...
The hitch manufacturers recommend drawbars for their hitches based on vehicle height and the most common trailer heights. The recommended drawbar for the 1993 Cadillac DeVille hitch is part # 36071 with a 2-5/8 inch rise or a 3-1/4 inch depending on orientation. Please refer to instructions for installing the hitch as which way the draw bar should be oriented. I will include a link to those instructions below. The hitch for your DeVille is Draw-Tite (NO LONGER AVAILABLE) part 36173. view full answer...
Based on the confirmed fit trailer hitch receivers we have for your 1998 Cadillac DeVille, I assume you have a 1-1/4 inch receiver opening. Because of how far back this sits from the bumper, I recommend the Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs # 36063.
With this ball mount you can use # 19258 for a 2 inch hitch ball or # 19257 for a 1-7/8 inch ball. view full answer...
Go To Results