To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Features:
Specs:
Whether you're hauling heavy loads in your bed or cargo area or you're towing a trailer, you will often see the rear of your vehicle sag while the front end rises. In these cases, the rear axle is handling not only the weight of the cargo, but also more of the vehicle's weight. Because less weight is on the front axle, the front tires are making less contact with the road. Overall handling - traction, steering, and braking - is negatively affected. But the resistance from Timbren's Suspension Enhancement System works with your factory suspension to keep your vehicle level and improve your driving experience.
The Timbren system comes with custom-fit brackets that are bolted onto each frame rail above the rear axle. Hollow rubber springs are bolted to the bottom of the bracket and hang down to where the bottom of the spring sits, 1" above the axle. The inch of clearance allows the existing factory suspension to operate normally under light loads and standard terrain, ensuring the smooth, comfortable ride that you are used to.
Timbren Suspension Enhancement Systems are designed to work progressively. When the hollow rubber springs are compressed, the convoluted design causes them to quickly collapse along the folds. Once the folds are compacted, the stacked barrel shape increases resistance, stiffening the suspension and keeping your vehicle level.
Each hollow rubber spring works independently to support the driver's side or passenger's side of your vehicle. This is helpful when you swerve or make sharp turns. Each spring is activated when it is needed, so body roll is greatly reduced. The independent action also works well when you are hauling off-center loads.
Because the vehicle handles better with the springs, less turbulence will be passed along to the trailer, and this helps to keep the trailer in line. Your driving comfort is further enhanced if the trailer does begin to sway (from a gust of wind or a passing semi), because the movement from the trailer is not transferred to your vehicle. This also works to make the sway subside more quickly.
Another great feature of the rubber construction is that the springs absorb most of the road shock, creating a smoother, more stable ride overall. Wear and tear on the factory suspension is also lessened because the rubber springs work to prevent bottoming out on rough roads.
Timbren's Suspension Enhancement Systems are much easier to install than air springs - there are no air hoses to run, no compressors or gauges to hook up, and no manual adjustments to make. The rubber construction makes Timbren's springs more elastic than similar products constructed of microcellular urethane. And more elasticity allows for a more comfortable ride because the rubber has more travel.
Average Customer Rating: 4.7 out of 5 stars (6051 Customer Reviews)
8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.These keep my truck level with my slide in camper on board. It no longer rests on the helper springs. I have gained over 2” of height on the bed. Super easy to install. They also are noticeable on corners. Not nearly as much lean.
The original timbrens were much too stiff and resulted in the elongation of the hitch pin holes. I opened a line of communication with Timbren had me make very specific measurements, and sent me replacement springs (shorter). I have not installed them yet (and have not found need for them). In my opinion these are only appropriate for heavy, permanent loads such as a slide in camper or welding setup and such.
I would not recommend them for periodic loading applications of less than 50% payload capacity on a 22 F350 SRW
Timbren customer service was excellent
In stalled these on my 17' F350 SRW, & these work great if you haul a gooseneck for a living or haul any type of trailer. No sag whatsoever,but lose maybe like 1-2" of height when loaded. From the price, they beat having to install bags that will eventually need maintenance.
The Timbrens worked well however because of the rougher ride I chose to remove them and replace with airbags and onboard compressor. Being able to adjust the ride while pulling a heavy 5er, made for a much better ride. I would put the timbrens back on the truck if the airbags ever fail.
Took about 45 minutes to install. But that was 2 trips into the house cause my deep drive sockets were buried. F-350 gasser with 8’ box, Fiberglas cap, 200lb wooden storage drawers and estimated 400lbs in tools. I tow a 14k bumper pull dump that squats the truck. I installed the spacer with the timbrens and it sits on the original axle stop. Ride quality is unknown as I haven’t driven it yet.
This is the second purchase of timbrens from Etrailer. I had installed timbrens on another F350. The installation is simple and they improved our towing experience.
I've had the Timbren suspension on my F350 for a year and they work great, I tow a 5th wheel weighing 14,500lbs and no squat and no sway!
Installation was extremely simple. So simple I was able to install this kit with one arm (elbow reconstruction 3 weeks ago). Can’t wait to see how it handles the 5th wheel.
They did exactly as advertised. Reduced bed travel downward when hooking up and maintained a good ride.
Already installed them on my truck and install went just as expected. Thanks etrailer for terrific customer service!
I bought these to offset any squat that I may get while hauling my fifth wheel camper. It literally took me about 15 minutes to remove the old ones and put these onto my 2023 F350. Much easier than dealing with air bags.
These work great. I have had them a year. They work the same or better than air bags. Super easy to install. Minutes with a beer in hand.
This is an excellent product, performs just as stated and does help with the ride when towing out fifth wheel
It looks like they are going to do the job. Easy install even had to take one back off to remove spacer. Gained back at least 1-1/2. Truck sits at least an inch off overloads. Little pricey I think for what they are but lot cheaper than air bags. Need to take after photo in day light.
2023 F350
Love these suspension enhancements, great price and arrived on time in box in excellent condition.
Smooths out the bumps. I'm very happy with the product. We traveled on the Alaska highway last summer pulling a 5th wheel with no problems.
These are great!! Removed the sideways motion in curves, removed the front/back rocking motion when crossing interstate bridge joints, and made the truck level with the camper attached. Simple installation as well.
Less than 15 minutes to install. Well built product.
Larry
6/1/2024
Fantastic
Product was easy to install, 1/2 hr taking my time. Used a open end wrench and floor jack. My 2018 F350 Super Duty Super Cab 4wd no longer plunges over bumps, it has lost all its rear end sway on turning, carries my load much smoother ( loaded all the time ). Even with the load I always carry, the vehicle sits 1” higher in the rear. Prior to the install I was constantly hitting the rubber stops on my factory overload springs.
Andrew
6/10/2019
Excellent! I have since purchased another set from you for a 2019 F350 diesel. These things are just the ticket! The ride and handling is so much better!
They work great, I have them on my 2022 F350 DRW with my 2023 1150 Arctic Fox camper
I have used these on all of my trucks. They work as described.
This is an absolute MUST have item if you are hauling with your truck. Hands down the best investment in suspension technology. No sag thanks to the addition of the 1” spacer. My 24,000lb triple axle 5th wheel with a pin weight os 4,000lbs is towed effortlessly from a single axle F350 cross country with no sag at all. My truck sits absolutely level. The helper leaf springs are not engaged and the truck is smooth and extremely stable, even without sway bars!!
Love and highly recommend this product to every SuperDuty owner i meet.
Best investment ever.
Perfect fit. Installation was pretty easy. Took me about an hour for both sides.
These things work great the etrailer person I spoke with was outstanding.
We travel full time in our fifth wheel camper. I installed these Timbrens on our 2019 F350 and they perform great! Keep our truck sitting level with camper hooked up. They also help improve the ride while traveling.
Paul
7/23/2023
Excellent! Have sold that truck and have a new F 350 but purchased a dually this time. And yes we installed Timbren on it as well.
Do you have a question about this Vehicle Suspension?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sean
10/17/2023
Product is still working great. No cracks or tears in the rubber. Still softening the bumps on the roads.