To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Improve light output and reduce eye fatigue with these DOT-compliant, bright white halogen headlight bulbs. Replacement bulbs deliver greater visibility than factory bulbs.
Features:
Specs:
Cool-colored light, especially that with a high color temperature, promotes driver alertness, as opposed to warm-colored light, which promotes relaxation. Color temperature is based on chromaticity, which refers to the quality of a color rather than its luminance. In short, Vision X's halogen bulbs incorporate bright light with high-quality color so that not only can you see the world around you, but you can be truly aware of it.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're gonna be going over and showing you how to install the Vision X headlight bulbs here on 2018 Hyundai Elantra. So now that we have both sides installed, we're gonna go ahead and turn on our headlights and see if we can notice a difference. So here's what it looks like with our new headlights installed. Now, I can definitely say that there is a difference. These lights are a lot brighter than the factory ones that we replaced. So adding these Vision X headlights here to your Elantra, it's gonna be an excellent upgrade for your factory bulbs, allowing you to see better at night.
Now these particular ones are gonna be going into your low beams, which are gonna be the ones that you're gonna be using most. But there's also an option to upgrade your higher beams as well, should you need to do so. Now the bulb type here for lower beams on this vehicle is gonna be 9005. Now, our Vision X bulbs are gonna be, as we said, brighter than the factory bulbs, they have 900 lumen rating. In regards to the color temperature of the light, it's gonna be 4,300.
Now the lumens rating is really gonna most closely translate to the actual brightness of the lights and the color temperature rating is really gonna be sort of the color of the bulb output. We've all seen those vehicles out there with those blue headlights and then we've seen some with a lower, yellow tone. So the color temperature range is pretty much gonna dictate what color that light is. The 4,300 rating of these is gonna produce a nice bright white light. Now one thing people look for in a headlight bulb is obviously brightness.
They wanna get the brightest light possible. Unfortunately, a lot of those very high lumen rating headlight bulbs out there on the market are not DOT approved. So they may be very bright and help you see better at night but they're also gonna be blinding other motorists out on the road. So a lot of those higher, brighter options are not simply gonna be road legal. With these here, the 900 rating of these gonna be perfectly road legal, DOT compliant.
You're gonna get a great visibility at night without blinding everyone else in the eyes. Now that we've gone over 'em a bit, let's show you how easy it is to change these out at home by yourself in your driveway. So the first step for installation, we need to locate the factory low beam bulbs. So if we look, we're gonna first have to open our hood. But if we look at our actual headlights here, you're gonna see two of these little caps on the backside of there. So we have one here on the inside, this is actually for our high beam. The one that we're gonna be replacing is the outside, the one that's tucked back here a little bit further. So what we need to do is, we need to actually spin this cap counterclockwise to remove it. So I'm just gonna reach in here with one hand. Now it can be kinda tight. This one here is pretty tight, so I may need to actually come in here with both hands. But we're basically just gonna spin that cap counterclockwise until we can pop it off. So if yours doesn't pop off once you have it spun all the way, I can tell it's not gonna go anymore, so I'm just gonna come back with my screwdriver there and pry it off. So that rubber gasket there is what's fighting us. So that's gonna keep out water but as you can see here sometimes it can stop us from removing that cap, which is why we just came in there with a notch. Use the screwdriver to remove the cover. So now it's pretty hard to see back in there but basically what we need to do is, we need to unclip the light, so there's gonna be a little connector there. We can come in with our screwdriver. We're just gonna peel that up and then we're gonna push down on that connector there to free it. So there's what that connector looks like there. And again, you're just gonna be prying out on this tab and pushing down. I was actually able to get mine off with a screwdriver in one motion. Now once we have that off, we're gonna be reaching in here for the factory bulb. So this is actually just gonna twist. Once you twist it, it should come right out just like that. Now we're gonna take our new headlight bulb and pretty much just install it using the reverse order that we showed you removing it. Now, one thing I do wanna point out is, you wanna make sure that you don't actually touch the bulb on your headlight bulb there because the oils on your finger can get on there and cause it to burst. So make sure you're not touching the bulb, only the base. And then if you do, make sure you're wearing gloves, that way, again, don't run into issues with the light breaking. So, we're just going to place that bulb through the opening there and then we will rotate it to lock it in place. Now, I understand it's kinda hard to see here because everything is sort of tucked back in the headlight there but it's actually pretty easy. It's only a few motions there. Once you get it rotated downwards, if you just pay attention to the orientation of the one you removed, it's pretty easy to be sure you get it the right way. But now we'll just go ahead and reconnect our electrical plug. And there we have it. Now all that's left to do is to reinstall our cover and then repeat the same process over on the other side. And that's gonna do it today for our look in installation of the Vision X headlight bulbs here on our 2018 Hyundai Elantra..
Average Customer Rating: 4.6 out of 5 stars (36 Customer Reviews)
Improve light output and reduce eye fatigue with these DOT-compliant, bright white halogen headlight bulbs. Replacement bulbs deliver greater visibility than factory bulbs.Upgrading my headlights was one of the best additions to my truck. I drive through Kansas where there are no lights. Now I do not overdrive my headlights. I have plenty of light on the road.
Great prices and customer service!!!
a1
Thought they would be brighter but good for the price
I purchased these items as replacements for when my existing headlights eventually fail. Since I haven't installed them yet, I can't remark on the quality/improvement etc, however I was very pleased with the pricing and the service provided by e-trailer.
I've used your site several times for my boat trailer needs ,everything is always delivered within a few days of placing my order. The tutorial videos help with details when I need a reference
Wrong bulbs for my model vehicle.
I Love These Headlights! A Bright White In Low and High Beams. More Brighter and More Light Output On The Road Than The Factory Bulbs. Now I Am Will Be Purchasing Some Nitro Blue Head Lights Soon To Match The Color of My Car, Purplish Blue (Blue Atlantis). Thank You etrailer.com!
etrailer delivered the package before time indicated. there was no damage and the bulbs worked. They were installed in a 2011 BMW R1200 GSA motorcycle. I have yet to take it for a spin at night but they should be better than stock bulbs and they have a lifetime warranty
These lamps were pretty easy to install, are definitely brighter than the factory originals. They have been on my F150 for a year now and are still working great. If you want a brighter head light I would recommend these.
do what their supposed to do
Still working after one year !
Received it faster then expected.
Perfect fit easy installation.
Little bit brighter then stock.
Product arrived within a week.
As for the bulbs itself I was disappointed how dimm it was. Reminded me of a 25W or 40 Watt lightbulb. Don't be fooled by the blue coating. Not the companies fault but still disappointing.
I received my low beam replacement bulb and my wipers. Good pricing and delivery, you can't beat that. Thank You!
Ordered Head light LED for two vehicles!!
Received order expeditiously!! GREAT Company that cares about their customers!!
A dummy could put these in. (super easy to do)
Plug and play. Very bright! I get flashed all the time with these and i dont have my brights on.
Great price for the lights. Great warra nty.
Great product, nice and brite, easy to install and switch out. Doesn't meet VA VDOT approval for inspections so I change them out every year for state inspection, about that time again. So save ou OEM bulbs if you need them. Thanks
Don’t own the vehicle any longer but the product worked great and easy to install.
OK but not bright enough for me!
Nice and bright
A little tight fit but I liked it.
works great
a1
Do you have a question about this Vehicle Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.