To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Vision X fog light upgrade kit delivers increased light output for your Chevrolet Silverado. Each of the 4 extremely bright lights produce 900 raw lumens of focused light. Quick-splice connectors and custom-fit brackets included.
Features:
Specs:
Light Output:
Dimensions:
These compact, extremely bright, 10-watt LED fog lights use precision optics to shoot out a narrow 10-degree spot beam for focused light that goes a great distance with an added halo effect in the immediate area around your vehicle.
The beam pattern of these lights is great for seeing at a distance. The narrow 10-degree beam concentrates the light at a single point. This makes it ideal for high-speed, off-road driving applications where distance vision is vital.
Lumens are used to measure the amount of usable light that is put out by a light source. Raw lumens represent the number of lumens that the manufacturer claims the LED is capable of producing. It does not include the light's drive method or the amount of light lost from the lens or reflector. Effective lumens take these factors into account and represent the number of lumens that are actually produced by the complete light assembly, not just the amount of light that the diode is capable of producing. Each of these Solstice Solo lights has a 900 raw lumen capacity and produces 540 effective lumens for ultra-bright light.
Each of these LED lights delivers maximum efficiency at all times and always activates immediately, giving you steady, powerful, and reliable light every time you hit the switch. You'll see the difference the first time you fire these lights up. Unlike HID lights, these lights don't need to warm up to achieve their full brightness. And unlike halogen lights, these LED lights don't require that you change out the bulb due to a blown filament.
Not all LEDs are created equal. Vision X uses only top-grade LEDs to ensure that their lights deliver maximum efficiency. Lower-grade LEDs, which make up a large portion of the market, produce more heat at the same wattage and have a much shorter life span.
Although LED lights typically produce far less heat than halogen or HID lights, heat is still the biggest enemy of an LED. Because of this, many LED lights on the market are only driven to 60 percent of their potential to avoid overheating, electrical spikes, and premature failure. Vision X controls and combats heat with electronic thermal management (ETM). This allows the lights to be driven to 90 percent of their potential.
The ETM system monitors each LED's heat level to keep the light operating at a safe temperature, which maximizes its efficiency and life span. If the ETM senses that the LEDs are getting too hot, it dials back the current, lowering the light's output while still keeping the LEDs fully functional and protected against burnout.
These Vision X lights are also built with advanced heat sinks to help dissipate heat. Each heat sink has a channeled design that allows for convection-style cooling. The channels create a non-mechanical fan - outside air is sucked into the heat sink at one end and flows out of the other end, taking hot air produced by the light with it.
Vision X lights are incredibly durable, yet still lightweight. And they are thoroughly tested and protected against voltage spikes; damage from water, shock, or particulates; and interference with radio reception and vehicle wiring.
Each Solstice Solo has a rustproof, black powder coated aluminum housing and a tough, impact-resistant polycarbonate lens with a scratch-resistant coating for maximum strength and durability.
The included custom-fit mounting brackets install using factory mounting points on your vehicle. The 304 stainless steel mounting hardware resists vibration to keep the lights firmly in place, and it won't rust or corrode.
And quick-splice wiring connectors are included for installation.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
..
Average Customer Rating: 4.5 out of 5 stars (6 Customer Reviews)
Vision X fog light upgrade kit delivers increased light output for your vehicle. Each of the 4 extremely bright lights produce 900 raw lumens of focused light. Quick-splice connectors and custom-fit brackets included.This is a great little light that is really bright. I use it for snowplowing, I mounted it on the rear pickup bed stake pocket
I purchased one of these lights to test and it worked so well that I bought a second. It provides great light as a backup light on my boat trailer. It is very durable, light weight and small enough to stay out of the way.
Arrived on time as promised and worked well. Wire up was involved but eventually resulted in good function. Worked well. As I have changed the bumpers on my Jeep Wrangler the tow location and illumination is now in different location. The lights bought with the kit are used elsewhere for forward underbody illumination.
I purchased this light a couple of months ago to test on my boat trailer. It work amazingly well lighting up the dark building I back into. I decided to install a second light on my other trailer. High quality very rugged design.
I have not installed yet, I feel the price is high for the product.
Great Product & Quick Delivery.
Brightness Counts for Safety of Pedestrians and Vehicles.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.