This 14" x 5-1/2" trailer wheel has a 5 on 4-1/2 bolt pattern and a 3.19" pilot hole diameter. The matte-black, rustproof aluminum wheel features a mod design with a machined face.
Features:
Specs:
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the Sendel 14 inch by 5-1/2 inch Series T17 matte black aluminum trailer wheel with the 5-on-4-1/2 inch bolt pattern. Now, this is an aluminum wheel. It's very durable, lightweight, and rust-proof. And we mentioned, this is the Sendel Series T17, which is a mesh style design wheel, has a matte black finish to it. Also, the front and the back of the wheel are clear coated.
This wheel is a high-quality wheel. It meets the DOT Department of Transportation specifications and the SAE J1204 standards. Now if you notice, this wheel does not come with a center cap. We do sell those separately. If you do want one, you do wanna make sure to order one that has the same diameter of this hole right here, this pilot hole, because when you install your cap, it'll go in through this hole.
The pilot hole diameter on this wheel is 3.19 inches. So you wanna make sure to get a cap that have that same 3.19 inch diameter. A few dimensions on this, we're gonna measure the diameter, which is always measured inside to inside, on this wheel, it's 14 inches. So if we get our tape measure, and if we go straight across, you'll see 14 inch diameter. The width on just the wheel, the same way inside to inside or bead seat to deep seat, there's your 5-1/2 inch measurement.
And the bolt pattern on this wheel is a 5-on-4-1/2 inch bolt pattern. And if you wanna measure that on a wheel that's an odd number of lugs, like in this case five, what you do is pick any hole. Let's say if we take this hole, and then you're gonna measure across to either this hole or to this hole. But when you measure, it's from the center of the starting hole to the furthest edge of the hole that you measure to. So on this one, if we measured it, it'd be 4-1/2 inches, so it's a five-luge 4-1/2 inch bolt pattern.
Does use a wheel lug size of 1/2 inch by 20, and the weight capacity on this wheel is 2,200 pounds. But that should do it for the review on the Sendel 14 inch by 5-1/2 inch Series T17 matte black aluminum trailer wheel with the 5-on-4-1/2 inch bolt pattern.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.