This 16" x 7" trailer wheel has a 6 on 5-1/2 bolt pattern and a 3.75" pilot hole diameter. The matte-black, rustproof aluminum wheel features a mod design with a machined face.
Features:
Specs:
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the Sendel 16 inch by 7 inch, and this is a Series T17 matte black aluminum trailer wheel with the 6-on-5.5 inch bolt pattern. Now, this is an aluminum wheel. It's very durable, lightweight, and rust-proof. And as we mentioned, this is the Sendel Series T17, which is a mesh style design wheel that has a matte black finish to it. Now, the front and even the back of the wheel is clear coated.
This is a high-quality wheel. It does meet the DOT Department of Transportation specifications and the SAE J1204 standards. Now if you notice, this wheel does not come with a center cap. If you want a center cap, we do sell those separate on a website. They're not included.
But I do wanna recommend that when you get the center cap, you do wanna make sure to get one that has the same diameter as the pilot hole here. A pilot hole in this wheel is where your center cap would insert through when you install it. And the diameter on this pilot hole is 3.75 inches. Now, I do wanna give you a couple measurements. We're gonna do the diameter and the diameter is always measured inside to inside.
So you can see if we take our tape measure and we go inside to inside, there's your 16 inch diameter. The width will be the same way, inside to inside or bead seat to bead seat. So if we put our rule on it, there's your seven inch width. And the bolt pattern on this wheel is a 6-on-5.5 inch bolt pattern. And if you wanna measure that on a wheel that's an even number of lugs, like in this case six, it's pretty easy because if you notice, the lug holes are directly across from each other.
So all you have to do is pick any hole, let's say this one, and then measure from the center of this hole directly across to the center of the hole right across from it. So on this one, it'll measure 5-1/2 inches. So it's a six-lug 5-1/2 inch bolt pattern. This wheel will use the wheel lug size of either a 1/2 by 20 or 9/16 by 18. And the capacity on this wheel is 3,750 pounds. But that should do it for the review on this Sendel 16 inch by 7 Series T17 matte black aluminum trailer wheel with a 6-on-5.5 inch bolt pattern.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.