Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(15 reviews)
Price: $244.37
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13103
Retail:$395.29
Our Price: $244.37
You Save: $150.92
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Need help with installation?
Locate installers near me- All Info
- Reviews (15)
- Q & A (0)
- Photos
CURT Trailer Hitch - C13103
- 2 Inch Hitch
- Class III
- 3500 lbs GTW
- Concealed Cross Tube
- CURT
- 350 lbs TW
- 3500 lbs WD GTW
- 350 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum GTW when used with weight distribution: 3,500 lbs
- Maximum tongue weight: 350 lbs
- Maximum TW when used with weight distribution: 350 lbs
- Maximum gross trailer weight: 3,500 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13103 CURT Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2009 - 2009 Mercedes-Benz R-Class R320 BlueTEC
- 2007 - 2008 Mercedes-Benz R-Class R320 CDI
- 2006 - 2012 Mercedes-Benz R-Class R350
- 2010 - 2010 Mercedes-Benz R-Class R350 - excluding BlueTEC
- 2009 - 2012 Mercedes-Benz R-Class R350 BlueTEC
- 2006 - 2008 Mercedes-Benz R-Class R500
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Product did not meet expectations
- Did not arrive in time
- Wrong item was ordered
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13103
Average Customer Rating: 4.3 out of 5 stars (15 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Jeffrey09/22/2017
This is my second hitch and just as easy install as the first. Great product, Great Quality and Most Excellent Service from etrailer!
Thank You,
Jeffrey
by: Jaime V11/14/2016
2011 Mercedes-Benz R-Class
Product seems in good shape although a bit heavy weighted (hoping it does not mean too much to my MB R350). Overall, shopping experience was perfect yet the package was received broken probably since product was loose inside the box (pictures attached)
by: Robert 08/11/2023
easy assembly great product!
by: Justin Hoffman09/07/2017
2008 Mercedes-Benz R-Class
I purchased this for my Mercedes R350 so I can tow a light trailer. Within an hour I had it installed. Easy as 1,2,3!
Very solid hitch.
by: Patrick05/07/2023
2008 Mercedes-Benz R-Class
Every box and hitch comes to the house Destroyed!
by: Lee01/25/2019
Received hitch in a couple of days and guess what it fit !!! An easy install it took about an hour including picking up tools. It was nice to get a quality product. Thanks
by: Jon06/05/2022
Heavy duty fit great instructions were a little confusing but figured it out
by: Pam08/31/2017
It looks good, havent installed it yet.
by: Volodymyr09/13/2018
2006 Mercedes-Benz R-Class
Amazing product
by: Michael04/04/2024
2012 Mercedes-Benz R-Class
by: Doug 05/19/2021
by: Markus 11/15/2022
by: Darrell 10/26/2021
by: Joshua 10/08/2020
2007 Mercedes-Benz R-Class
by: John 09/13/2022
15
15
See what our Experts say about this CURT Trailer Hitch
- Torque Specifications to Install the Curt Hitch Receiver C13103 on a 2009 Mercedes-Benz R-ClassThe M10 x 1.50 CL 10.9 fasteners will need to be torqued down to 45 lbs-ft and the 7/16" 59 lb-ft for the Curt Trailer Hitch Receiver # C13103. This is in line 8 of the instructions, we usually do not answer that question because companies like Curt often update and improve their torque specs, so always check the attached current specifications for the most recent recommendations in case they have been updated. This is a confirmed fit for your 2009 Mercedes-Benz R-Class. I have attached...
view full answer... - Is Cutiing Required for Installation of the Mercedes-Benz R350 Trailer Hitch # C13103You will not need to cut the OEM bumper for installation of the Curt Trailer Hitch, item # C13103, for the 2008 R350 by Mercedes-Benz. There is some cutting required, but the cut areas are under the vehicle and will not be visible when the hitch is installed. If you have a vehicle with cross bracing member, and in 3 places, if your vehicle does not have the cross-bracing members. The installation instructions, see link below, show exactly where to cut the plastic trunk pan and explain...
view full answer... - Trailer Hitch Recommendation for a 2012 Mercedes Benz R350The Curt Hitch part # C13103 that you referenced has been confirmed as a fit for your 2012 Mercedes Benz R350 so it would work well for you.
view full answer... - Removal of Fascia on Mercedes 2008 R350 When Installing a Curt Trailer Hitch, Part # C13103I spoke with my contact at Curt and he informed me that the underbody panel needs to be removed before installing the Curt Trailer Hitch Receiver, part # C13103, on your 2008 Mercedes R350. He said that although there are only 4 bolts holding the fascia, the underbody panel is held in place by 7 plastic pins, or bolts, so caution needs to be used when removing these. I have attached the installation instructions for the C13103 hitch.
view full answer... - Availability of Hitch for 2006 Mercedes R500We offer two different Class III hitches that are a fit for your 2006 M/B R500. Both the Curt # C13103 and the Draw-Tite # 75470 offer a 3500 lb towing/ 350 lb tongue weight capacity, but the warranty requirements of the Curt hitch stipulate that a stabilizing strap like # 18050 needs to be used for non-trailer loads like bike racks or cargo carriers. Because the Draw-Tite hitch has no such stipulation, I would recommend the Draw-Tite over the Curt hitch. I have linked you to the installation...
view full answer... - Trailer Hitch For A 2009 Mercedes-Benz R350We do have a trailer hitch option for your 2009 Mercedes-Benz R350, but the # C13190 that you mentioned is not going to fit your vehicle. The correct hitch for the 2009 Mercedes-Benz R350 is the Curt class 3 hitch # C13103. This is a 2" receiver rated for towing 3,500 lbs and 350 lbs of tongue weight.
view full answer... - Will the Curt Trailer Hitch # C13103 Fit on a 2010 Mercede-Benz R350 BlueTec DieselI have checked with my contacts at Curt and the # C13103 is confirmed as a fit for your Mercedez-Benz R350 with Blue Tec Diesel option. This is a Class III trailer hitch that offers a 2-inch receiver opening and is rated for towing up to 3,500 pounds and a maximum tongue weight of 350 pounds. You may also consider the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT that will not require you to cut or splice into your vehicle's wiring system. This will supply a traditional 4-way...
view full answer... - Trailer Hitch and Wiring Recommendation for a 2006 Mercedes R350For a hitch for your 2006 Mercedes Benz R350 we do have the part # C13103 as a fit like you have determined. Now for wiring we have universal wiring kits like the part # C56236 which are a confirmed fit. Or, if you wanted a wiring harness that does not cut into the wiring of your vehicle at all we have the ZCI part # 119250KIT which would also work well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a...
view full answer... - Ground Clearance of Curt Hitch Installed on 2008 Mercedes Benz R320 CDIFor your 2008 Mercedes Benz R320 CDI we have the Curt hitch part # C13103 as a confirmed fit. This will fit your vehicle will and will not sit too low at all. When we installed this hitch on a similar 2006 MB we found that from the top of the hitch opening down to the ground measured 10-1/2 inches.
view full answer... - Diagram of the Portion of the Fascia that Needs Trimmed to Install Curt Hitch # C13103I attached a copy of the installation instructions for the Curt hitch # C13103 which is confirmed your 2007 Mercedes R350. The installation instructions have the diagram that you need.
view full answer... - Trailer Hitch for a 2012 Mercedes R350 BlueTecCurt trailer hitch # C13103 is listed as a fit for the 2012 Mercedes R350 BlueTec models. The installation is fairly straightforward so a trusted mechanic or RV dealer that has a service center could perform the hitch installation for you. For wiring, we have the ZCI No-Splice Wiring Harness, # 119250KIT, that will fit your Mercedes. I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise...
view full answer... - Hitch Fit for 2006 Mercedes-Benz ML500Unfortunately, the hitches we offer for a 2006 Mercedes-Benz ML500 aren't compatible with vehicles that have the air-ride suspension option. I wish we had better news for you. If you were needing the hitch to provide a mounting point for a bike rack, you could use a hatch mounted bike rack like the Thule Gateway 2-bike model, part # TH88VR or the 3-bike model, part # TH78VR which would be a good alternative to a hitch mounted bike rack.. I've linked to a product demonstration video featuring...
view full answer... - Wiring Kit Compatible with 2011 Mercedes-Benz R-Class The answer you referenced is from early 2015 and will be updated because we have since learned the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT is a fit for your 2011 R-Class Mercedes-Benz. The zero contact interface uses sensors to capture the signal on your wires so they are uninterrupted and yet the powered modulite can transfer the signal to your trailer wiring functions. It is a great option for you if you...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.