Custom Fit Roof Rack Kit With Y00410 | Y03536 | Y06124 | Y27FR | Y28TR
(280 reviews)
Price: $578.75
Custom Fit Roof Rack Kit With Y00410 | Y03536 | Y06124 | Y27FR | Y28TR
Item # Y82ZB
Our Price: $578.75
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (280)
- Q & A (0)
- Videos (50)
- Photos
Yakima Roof Rack - Y82ZB
- Round Bars
- Crossbars
- 66 Inch Bar Space
- Yakima
- Black
- Overhang
- 2 Bars
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.
Features:
Yakima 66" RoundBar LG:- Sturdy, round crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers, fit kit, and RoundBar SL Adapter (sold separately) to create a complete roof rack
- Accommodate accessories that clamp around the bars
- Optional RoundBar end caps (sold separately) keep out dirt and grime
- Constructed from vinyl-coated, galvanized steel
Yakima RoundBar SL Adapter:
- Adapters let you mount your Yakima RoundBars on BaseLine, SkyLine, TimberLine, or RidgeLine towers
- Easy installation - adapters slide onto bars and attach with bolts (included with towers)
- 4 Adapters and 4 RoundBar endcaps included
Yakima BaseClip 124:
- Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
- Padded, stainless steel clips provide secure grip on your door jambs
- Snap onto DropHooks inside towers
- Protect door jambs from scratches and abrasions
- Powder coated for durability and rust resistance
- Molded rubber pads fit the contours of your roof
- Clip onto bottoms of towers
- Protect roof from scratches and abrasions
Yakima BaseClip 197:
- Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
- Padded, stainless steel clips provide secure grip on your door jambs
- Snap onto DropHooks inside towers
- Protect door jambs from scratches and abrasions
- Powder coated for durability and rust resistance
- Molded rubber pads fit the contours of your roof
- Clip onto bottoms of towers
- Protect roof from scratches and abrasions
Yakima BaseLine Towers (4-pack) (w/new covers):
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
- Pair with 2 Yakima crossbars and BaseClips to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Pivoting bases can be adjusted during installation to ensure towers are seated correctly
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Safe and easy installation with DropHook system and included torque tool
- DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
- BaseClips attach to hooks in tower assemblies and tighten for a secure grip
- Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction with matte finish
8000410 Yakima Round Crossbars - Steel - Black - 66" Long - Qty 2
8003536 RoundBar StreamLine Adapter for Yakima Base Line, Sky Line, Timber Line, and Ridge Line Towers - Qty 4
8006124 Custom Base Clips and Pads for Yakima Base Line Towers
8006197 Custom Base Clips and Pads for Yakima Base Line Towers
8000162 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4
Replaces 8000146
Video of Custom Fit Roof Rack Kit With Y00410 | Y03536 | Y06124 | Y27FR | Y28TR
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima BaseLine Roof Rack Towers BaseClip Fit Kit Review
Hi, everyone, Aidan here with etrailer. Today, we're gonna be taking a look at the Yakima BaseClip Fit Kit for your Yakima BaseLine FX Roof Rack Kits. Now, this is gonna be the rubber pad and the clamps that actually hold the whole roof rack system in place and make it a custom fit for your various different vehicles. Now, that being said, there's tons of different kits out there on our website for different vehicles, all of those pads are gonna be molded somewhat differently to adapt to different roof shapes, so do plug in your vehicle information into our fit guide and find the right fit kit for you and your vehicle, but it's gonna be a look at the overall system, how it works, and how it functions with the roof rack. So the main two parts of this are gonna be the rubber pad and the clamp, but let's talk about that rubber pad first. It's gonna be custom molded to your vehicle, so you can see really well right here on this lip, it forms around that ridge on the roof and fits snugly into place there to make sure that nothing is moving around and it's fit custom to that area.
Now, the base of that fit kit is what actually clips into the tower here and serves as the connection point between the crossbar roof rack system and your vehicle. That rubber base to it is going to give you the maximum protection and make sure that you're not scratching or scuffing any paint on your roof, and it keeps things nice and sealed up. Now, the stainless steel clip is what also helps to secure it to our roof, that's gonna be the second main component. It's a stainless steel construction and a black powder coat finish, the finish helps it match the whole roof rack system, but it all helps it resists rust and corrosion. Now, the inside of those clips are gonna have a rubber padding, again, so there's no metal on metal contact with our paint or anything, and then you can see here, it's custom fit, hooking inside our door jam, and whenever I close the door, it'll just fit right around there, making sure that it's a nice custom fit.
It attaches up inside the tower right up through here, and it just tightens down, hooking into a slotted opening hole, and then that's what gets it all secured and what helps it join into the tower system. These fit kits come in pairs, one for the passenger's side and one for the driver's side. Now, the reason they do that is because depending on your vehicle, you're probably gonna have a different fit kit for the front and rear. Yakima does a lot of research and development into making sure it's a custom fit for the vehicle, and the one we have it on here today, the Honda Civic, is a perfect example. You can even visually see how much longer the clamp at the back is compared to this clamp up at the front.
So clearly, we're gonna need a different kit for the front end, because there's just less distance for that clamp to travel. So again, plug in your vehicle information to our fit guide, make sure you find the right kits for you, and make sure that you also have the right set for the front and rear. But that's really all there is to it. The BaseClip system is gonna work really well in tandem with that BaseLine roof rack system, and it's really just coming down to making sure you get the right fit for your vehicle, because without that fit kit, you don't have a roof rack. But that'll do it for our look at these BaseClip Fit Kits for your Yakima BaseLine Roof Rack Systems.
Thanks for watching.
Customer Reviews
Custom Fit Roof Rack Kit With Y00410 | Y03536 | Y06124 | Y27FR | Y28TR - Y82ZB
Average Customer Rating: 4.7 out of 5 stars (280 Customer Reviews)
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.by: TimN03/19/2024
Works perfectly. I am always impressed that Yakima continues to make parts for the "old roundbars" since they have since moved on to the superior JetStream bars.
by: Adam05/24/2024
should come with end caps.
by: Charles02/09/2024
Toyota 4Runner
Kimberly has shown that great customer service is not dead! etrailer and Kimberly are great to work with and have earned my business and will always be the 1st and last place I look for my rack+ needs!
As for the application, I needed more space to fit my cargo box on top of my 4Runner TRD Pro’s rack. I came up this this… Thank you!
by: J-fan05/04/2024
Excellent selection of rack parts. Very useful installation videos help when choosing between products. Easy ordering process. Quick delivery.
by: Todd06/24/2023
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
by: Tim 10/18/2023
One quick phone call and Gwendolyn figured out exactly what I needed for our new car to use my old Yakima rack.
by: 04/01/2024
necessary for using the widest cross bar option (78"). East to install
by: Dave02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
by: Larry 09/20/2023
Baseclips were as described and shipping was spot on!
by: Bob 08/22/2023
Once I got the correct Yakima part numbers they worked very well. I am very pleased!!
by: Paul08/16/2023
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
by: Thomas 12/25/2023
Clips were a perfect fit on my 2022 F150
by: Jerry F04/23/2023
I have been using Yakima racks for around 40 years and have never had any problems. However, I am amazed at the price increases over the years. Etrailer prices were by far lower than most. Overall, a very excellent purchase.
by: Mark 01/11/2024
Great products though, again, written instructions would have been nice.
by: Debra09/10/2023
The rack has been so useful since I purchased it. Staff at etrailer.com were exceptionally helpful in getting the best option for my car and answering questions. I recommend this company, for its 110% customer service, excellent prices and timely delivery.
by: Roland01/08/2024
Haven’t used them yet but they should work as expected
by: Richard R02/20/2023
GMC Canyon
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
by: Luther04/20/2021
The yellow pads on the crossbars are pool noodles secured by zip ties. They provide padding for a third or even a fourth kayak.
by: Jay07/31/2023
Subaru Forester
Kit worked perfectly on my 2021 Subaru Forester. The whole install took 30 minutes. Never been disappointed with etrailer.
by: Deborah07/27/2023
Great service - great price
by: Deborah07/27/2023
Great service - great price
by: Nick09/21/2017
Product works as advertised thus far. When you buy the yakima towers, you are required to purchase these as well to fit the rounder bars (I feel sure there are other adapters for other bar shapes). These should have come with the towers in my opinion, and I resented having to shell out more $$ to purchase these "must have" adapters to mount my bars. 3 star overall rating based on function, price. Delivery and packaging was top-notch through etrailer.
by: Moparnut22808/20/2023
Great product fast shipping
by: Andrew08/01/2023
Great! Easy to install!
by: Mark07/19/2020
The Yakima roof rack system is an Outstanding product. I purchased the product to replace the OEM roof rack because it was too flimsy to carry the tandem bike mount and my bike. The Yakima roof rack is solid and provides me the peace of mind while hauling my bike on the roof of my car. etrailer provided the product for the best price as always.
25
906
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Flexible Track Rack System for Curved RoofYou will be able to mount the tracks of the Yakima 42" Tracks for Roof Racks # Y01127 on your 1939 Ford Sedan and still be able to move the crossbars around in order to adjust the spacing during crossbar mounting. The tracks are made of a light weight aluminum that can be bent enough to match the contour of your roof. To make a complete roof rack system, you will need two pair of the Landing Pad 1 # Y00221, along with four of the Yakima Control Tower # Y8890027 and 2 round bars like the...
view full answer... - Can I Mount the Thule UpRide to Yakima Round Bars?Yes you can! The Thule UpRide Roof Bike Rack part # TH599000 comes with both types of hardware. There is hardware for mounting it to the track in the aero type bars and clamps for mounting to the round, square and factory type crossbars like the Yakima Round Bars part # Y00410. Check out the video below it will show you exactly how the clamps work for mounting.
view full answer... - Parts Needed to Install Yakima Roof Rack on Leer Camper Shell with Roof TracksWe have the Yakima roof rack components needed to install in the tracks on top of your Leer 100XR camper shell. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 # Y00221 quantity 4 of the Control Towers # Y8890027 and depending on the length of your cap quantity 2 Crossbars like: 48 inch # Y00408 58 inch # Y00409 66 inch # Y00410 78 inch # Y00411 To lock your roof rack to your tracks, I recommend the set of 4 lock cores with keys # Y07204.
view full answer... - Can I Use Crossbars Wider Than My Vehicles RoofAs long as the crossbars you use aren't wider than the widest part of the vehicle (usually the mirrors), which could be a safety problem or even illegal in some areas, you could certainly use longer crossbars than the 58 inch crossbars. Since your Toyota Camry's roof is 71 inches wide at its widest point using 66 inch crossbars like # Y00410 would be just fine. You could also use the 78 inch bar like # Y00411 and cut it down to 71 inches. Whether this will be long enough will depend on...
view full answer... - Can 66" Crossbars be Installed on 78" Yakima Rack and Roll TrailerThe Yakima Rack and Roll Trailer # Y08107 was designed for the 78" bars and so to use the 66" Round CrossBars # Y00410 you'll need to swap out to the 66" Crossmembers # 8880155 as well, otherwise the trailer will be too wide for the 66" crossbars. I confirmed all of this with my contact at Yakima.
view full answer... - Parts Needed to Install Yakima Roof Rack on Leer Camper Shell with Roof TracksWe do offer the Yakima Control Towers # Y8890027 (you need 4) and Landing Pad 1 # Y00221 (you need 2) that will allow you to install Yakima round crossbars on a truck camper shell, but not using the older raingutter tower setup. Yakima round bars are available in many lengths. You may already have a set that will work too. 58-inch # Y00409 66-inch # Y00410 78-inch # Y00411
view full answer... - Which Roof Racks Will Fit a 2004 Ford E-150 VanWe do have roof rack options for a 2004 Ford Van. I have included a link to the available options for you to view. The most popular and most economic option is the Yakima system. For it you will need the following parts: Crossbars, # Y00410 Yakima Raingutter Towers, # Y00101 I have included a link to the installation details for the Raingutter Towers for you. If this is a work van and you need a ladder rack option, we have those as well. I have included another link to them for you.
view full answer... - Yakima Track Roof Rack Recommendation for Truck Bed Camper ShellWe do offer the Yakima Control Towers # Y8890027 (you need 4) and Landing Pad 1 # Y00221 (you need 2) that will allow you to install Yakima round crossbars on a truck camper shell, but not using the older Q tower setup. For a 54 inch long track for the rack to install in you'll need the part # Y01127. Yakima round bars are available in many lengths. You may already have a set that will work too. 58-inch # Y00409 66-inch # Y00410 78-inch # Y00411
view full answer... - Yakima Roof Rack to Fit Truck Topper Tracks on 2005 Nissan FrontierSince you already have Yakima tracks on your topper you can complete the roof rack using Landing Pad 1, part # Y00221, with Control Towers, part # Y8890027, and round crossbars. You need two sets of the landing pad and four control towers. Then choose your length of crossbar: 48 inch - # Y00408 58 inch - # Y00409 66 inch - # Y00410 78 inch - # Y00411 86 inch - # Y00420
view full answer... - Can I Purchase a Half System of the 66 Yakima Round Crossbars?Yes, we do carry a option for a single Yakima Round Crossbar - 66" # Y8810025 for your 2020 Ford F-250 Super Duty (Super Cab). In addition to the crossbar, you will need two of the Replacement BaseLine Tower for Yakima Crossbars # 8880618, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06185, and two of the Replacement RoundBar SL Adapter for Yakima StreamLine Towers - Qty 1 # 8880641. With that being said, in order to transport a kayak or a canoe on the top of your...
view full answer... - How to Fit Two Sea Kayaks and a Thule Cargo Box on a Honda CR-V with Yakima Roof RackI may have an option for you, but you will most likely not be able to fit two kayaks with J-style kayak carriers and the Evolution 1800 cargo box on 48 inch or 60 inch crossbars. Instead, I recommend looking at the Yakima Kayak JayLow, # Y04073. The JayLow can stack the kayaks on their sides giving you more room for the cargo box. You may need to upgrade to the 66 inch crossbars, # Y00410, due to the size of your cargo box, but that will also depend on the size of your kayaks. If you place...
view full answer... - How to Carry Kayak at Front of 1992 Ford E-350 VanThanks for the photos, and although we do have a solution for you, the Curt Vertical Receiver Adapter # C45013 will only work with vertical OEM hitch receivers, which your 1992 Ford E-350 does not have. Additionally, any type of adapter is going to cut the capacity of your trailer hitch in half - including the tongue weight so adding any type of adapter with the type of cargo you are carrying is likely to push you past your capacity limits. The best option to carry your kayak is going...
view full answer...
- Parts Needed to Install 3-Crossbar Yakima Roof Rack on 1989 Toyota Land CruiserYes, you can use 2 of Yakima Replacement 1A Raingutter Tower # Y8810137 to add a third round crossbar # Y8810025 to the roof of your 1989 Toyota Land Cruiser. You will want to order the following items and quantities to get your 3-bar rack system. # Y00410 = 1 # Y00101 = 1 # Y8810137 = 2 # Y8810025 = 1 # Y8810136 = 1 These items will give you a total of three bars and six towers.
view full answer... - Recommended Yakima Roof Rack with Additional Bar for 2004 Ford VanThe Yakima Round 66" CrossBars for Yakima Roof Rack System (QTY 2) # Y00410 and Yakima 1A Raingutter Towers (QTY 4) # Y00101. You can then add tower # Y8810137 (each) with bar # Y8810025 with end caps # Y8007026. Then I recommend using locks # Y07206 to secure your investment. You can see the total in your online cart.
view full answer... - Roof Rack for 2020 GMC Savana 3500 to Use Yakima LockNLoad Platform RackIf you install the Yakima Round Bar Roof Rack part numbers # Y00410 and # Y00101 on your 2020 GMC Savana Van 3500 with a naked roof the LockNLoad Platform Rack # Y05049-39 would fit and work great.
view full answer... - Will The iKamper 2.0 Fit Yakima CrossBarsAccording to iKamper's website, their product mounts to most cross bars due to its universal design, however since we do not carry their products I can not confirm this. With that being said, since they say it is universal, you can absolutely use the Flexible Track Rack System # Y01127, with the landing pads # Y00221, and the control towers # Y8890027 to mount the iKamper 2.0 on your 2008 Toyota Tundra. Depending how wide your roof is, you can use the 66" crossbars # Y00410, the 58"...
view full answer... - Recommended Roof Rack for 2015 GMC Acadia for Two Hullavator Kayak CarriersThe Thule Hullavator Pro Kayak Carrier # TH898 has a bar length requirement of 31 inches for each carrier and the crossbars must overhang by 4-8 inches. For your roof rack, you will need the Thule Evo feet # TH710401 and then locks # TH450400. Finally you will use the Thule ProBar Evo Crossbars - Aluminum - 69" Long - Qty 2 # TH713600 which you will need to trim to 63 inches. This will give you a roof rack that will work with your two Hullavators and has a max weight capacity of 130...
view full answer...
- Rack to Mount On Truck Bed Rails for 2013 Toyota Tundra with Tonneau CoverIt is possible to install the Swagman Roamer LT Roof Rack # S80510 on the bed rails of your 2013 Toyota Tundra. However, I see a couple of potential compatibility issues between the rack and tonneau cover that it will be important to consider. The crossbars of the rack will not allow the tonneau cover to fold back, if it is a hard tonneau cover. Even removing the crossbar from the foot may not provide enough clearance for the tonneau, as the base of the foot extends inward, toward the truck...
view full answer... - Can Yakima Tracks for Roof Racks be Slightly Bent During Install on Tear CamperI reached out to Yakima in regards to bending the Yakima 42" Tracks for Roof Racks # Y01126 and they told me that yes it is okay to bend the tracks during the installation. For the rest of the installation you can use a quantity of two of the Landing Pad 1 # Y00221, along with four of the Yakima Control Tower # Y8890027 and round bars like the 58 inch # Y00409, 66 inch # Y00410, or 78 inch # Y00411, depending on the size of your camper's roof.
view full answer... - Recommended Roof Rack System for A.R.E. Camper Shell with TracksThe items mentioned in your question are exactly what you need to install a roof rack system to the A.R.E. Camper Shell on your Ford F-150. Just to confirm, you will need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper...
view full answer... - Largest Roof Rack Recommendation for a 2016 Subaru OutbackIf you install the Yakima SkyLine Towers, # Y53TR, along with the Round Bar Adapter, # Y03536, and the Landing Pad, # Y00241, then you can install any length of the Yakima round crossbars that you wish. Yakima has a 78 inch crossbars, # Y00411, 66 inch crossbars, # Y00410, 58 inch crossbars, # Y00409, and 48 inch crossbars, # Y00408. It is okay to cut them down to a custom length as well if you feel like one is too long once it is installed. There are a few things to keep in mind. First,...
view full answer... - What Roof Rack Fits My 2019 Jeep Wrangler Unlimited with Sky One Touch Roof?I have a great solution for you. Unfortunately, I confirmed with Rhino-Rack that the Rhino-Rack Roof Rack Legs - Gutter Mount - 8-1/4inch Tall # RL210S2 and the Rhino-Rack Vortex Aero Crossbars # RRVA150B-2 are not confirmed to fit your 2019 Jeep Wrangler 4-door Unlimited with a Sky One Touch roof. However, we currently do have a confirmed setup that will work from Yakima. For that system, I recommend the following parts for your vehicle: - Round CrossBars for Yakima Roof Rack - 58"...
view full answer... - Crossbar Recommendation for Yakima JayLow Kayak Carrier and 2015 Jeep Grand CherokeeThe best roof rack we carry for using long crossbars is the Yakima RoundBar system. Since the bars slide through the mounting points on the feet you can essentially use whatever length of bar you'd like. I do caution you to not get bars that extend out further than the side view mirrors though. The Yakima system that fits your 2015 Jeep Grand Cherokee with the black and chrome roof rails is the SkyLine system. You need the SkyLine towers # Y53TR, RoundBar adapter # Y03536, and Landing...
view full answer... - How to Carry Two Kayaks on 2014 GMC Sierra 1500 Extended CabThe best option really is going to be a roof rack with two J-style carriers, but since you mentioned possibly not being able to lift the kayaks up, you'll need a load assist. That is a lot of parts, so I'll list the recommend ones for you that give you the best value, starting with the roof rack for your 2014 GMC Sierra 1500 Extended Cab: - Round 66" CrossBars for Yakima Roof Rack System # Y00410 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof...
view full answer... - What Kayak Lift Assist Option Can I Use On My 2013 Toyota AvalonYou need to install a roof rack on your 2013 Toyota Avalon. The Thule Hullavator is compatible with your vehicle. Unfortunately, any roof rack for your vehicle will clamp to the frame of the vehicle. The roof rack that I recommend for your 2013 Toyota Avalon will consist of the following: Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2, part # Y00422 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
view full answer... - Will the Inno Ridge Rooftop Cargo Cargo Box Fit on a 2015 Volkswagen Golf Hatchback?The Inno Ridge Rooftop Cargo Box - 8 Cu ft. # INBRA220R-BK will fit all types of Yakima crossbars except for the Yakima HD Crossbars # Y01156. As far as access to the rear hatch, the Inno Ridge will allow you to access the rear hatch of your 2015 Volkswagen Golf Hatchback. If you need a complete Yakima rack system for your 2015 Volkswagen Golf, I recommend the following parts if you have a 3-door Golf with a bare roof: - Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 # Y00421 -...
view full answer... - Which Adapter for Yakima Round Bars on TimberLine Towers for 2021 Kia TellurideYes; we've got just what you're looking for to use your round bars on your new 2021 Kia Telluride. The Roundbar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03536 will work with the Yakima BaseLine Towers # Y28TR and allow you to use your existing Yakima round bars. You can add metal lock cores to your BaseLine towers with part # Y07204, as well.
view full answer... - Will etrailer.com J-Style Kayak Carrier Move Around on Yakima Round CrossbarsThe etrailer.com J-Style Kayak Carrier # E98878 that you referenced is compatible with your Yakima round crossbars and their rubberized brackets will limit a lot of the movement, but the cradles will still likely move around a bit on the bars until a kayak is actually loaded. Once a kayak is in place the cradles will secure to the round bars and won't move at all. This is really just the nature of round crossbars and standalone accessories like J-style cradles in general. The only way...
view full answer... - Yakima Roof Rack Options for 2015 Ford Edge Sport with No Existing Roof RailsThe Yakima round bar roof rack we offer for your 2015 Ford Edge Sport with no existing rails or crossbars is composed of 5 parts, items # Y00409, # Y28TR, # Y03536, # Y06102 and # Y06139, which are the items you referenced. All four Yakima roof racks for your 2015 Ford Edge are shown on the linked page. The BaseLine system with black bars consists of parts # Y00422, # Y28TR, # Y06102 and # Y06139.
view full answer... - Roof Rack For 2017 Ford Escape With Bare Roof to Carry 2 Thule HullavatorsWe can absolutely get your 2017 Ford Escape with a bare roof set up to carry a pair of Thule Hullavators. What you will need is a roof rack system from Yakima, as this is the only brand that can accommodate the crossbar length you need to carry a pair of Hullavators. I will list out everything that is needed for the roof rack that fits your '17 Escape, and I'll also add the part numbers for you for the locks for both the Yakima rack as well as two Hullavators. - Yakima JetStream Crossbars...
view full answer... - How to Carry a Long Canoe and Tow a Trailer with a 2018 Chevrolet Silverado 2500HDIn order to haul a 17' long aluminum canoe and tow a trailer with your 2018 Chevrolet Silverado 2500HD, I have two options for you. The first option would be to place part of the canoe on the roof and the other part on a t-load carrier at the rear. For this, I recommend using the Yakima JetStream Crossbars System (Double/Crew Cab Only) which is composed of part # Y00426, part # Y28TR, and part # Y06122 with the Yakima KeelOver Rooftop Canoe Carrier part # Y04069. This will then allow you...
view full answer... - Could Two Thule Hullavators fit on Yakima CoreBar for 2018 Ram 1500Since your Thule Hullavator # TH898 was made in 2017 that means that it is one that can be used on a Yakima roof rack for a naked vehicle roof like the Corebar # Y00422, # Y28TR, and # Y06135 which is a 60 inch crossbar setup and would easily be long enough for two Hullavators.
view full answer... - Best Roof Rack and Four Fishing Rod Holder for a 2019 Ford RangerThe roof rack I recommend for a 2019 Ford Ranger is the Yakima JetStream Crossbar System which consists of part # Y00425, part # Y28TR, and part # Y06124. The Yakima JetStream Crossbar System is one of the best options on the market which has aero shaped crossbars which work to reduce wind noise/drag and rubber padded feet to protect the vehicle's finish. The fishing rod carrier I recommend for the 2019 Ford Ranger with Yakima JetStream Crossbar System is the Yakima ReelDeal Rooftop Fishing...
view full answer... - Recommended Roof Rack for Carrying Kayaks on 2017 Volkswagen GolfI'd be happy to recommend a roof rack for your 2017 Golf. I'd recommend using a rack that uses the aero style crossbars, as the round or square 'standard' roof racks are REALLY noisy. The exact parts you need will depend on how the roof is currently equipped. If it's a completely bare roof, I'd recommend a Yakima CoreBar rack, which would assemble from the following parts: • Yakima 50 inch CoreBar crossbars, part # Y00421 • Yakima BaseLine Towers, part # Y28TR • Clip Kit, part # Y06123 •...
view full answer... - Recommended Roof Rack System And Kayak Carrier For 2021 Nissan Rogue With Bare RoofAbsolutely! Since your 2021 Nissan Rogue has a bare roof, I recommend the Yakima BaseLine Roof Rack System which uses 50" Yakima JetStream Crossbars # Y00425, Yakima Baseline Towers # Y28TR, Fit Kit # Y06179, and Fit Kit # Y06161 which Yakima was able to confirm will fit your vehicle. Adding the Yakima Same Key System (SKS) Lock Cores # Y07204 will secure the roof rack to the roof of your vehicle. Since you mentioned wanting to install a kayak carrier, I recommend the Yakima JayLow Kayak...
view full answer... - What Kayak Load Assist Can I Use With My Lockrack For My 2016 Subaru WRXI do have a solution for you, but will not involve the Lockrack Loading Bar. You will still have to remove, or adjust the orientation, of the arms for this solution to work, but this method would be your only option. You can use the following items to help you load your kayak with the Lockrack Loading Bar. Yakima BoatLoader EVO Telescoping Load Assist - 28" Extension, part # Y04085. This load assist bar is stored in your crossbar when it is not in use. It has a weight limit of 80 lbs....
view full answer...
- Roof Rack Recommendation for 2006 and 2021 Toyota Corolla to Use with Thule Hullavator ProI recommend going with the Yakima JetStream roof rack system for your 2006 Toyota Corolla because it will be long enough to accommodate the Thule Hullavator Pro Kayak Carrier # TH898, and you'll be able to use the same crossbars and leg kit for your 2021 Toyota Corolla. 50" JetStream Crossbars - Black # Y00425 BaseLine Towers - # Y28TR Fit Kits - # Y06136 and # Y06148 Lock Core Kit - # Y07204 (optional) Then once you get the 2021 Corolla you just need the Fit Kits # Y06135 and # Y06151. Yakima...
view full answer... - Replacement Claws for Yakima Roof SystemsThe claws in your picture look similar to the Replacement Large Claw Assembly for Yakima Railgrab item # Y80144. I have attached a graph showing what type of Yakima claws fit what kind of roof rack to assist you in matching up your rails to the correct claws. I have linked our selection of replacement claws. Yakima also makes a roof rack system for your 2019 Hyundai Sante Fe the roof rack Includes: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 Item # Y00425 BaseLine...
view full answer...
- Yakima Aero Crossbar Roof Rack Recommendation for 2013 Nissan RogueThe parts you need to install the Yakima aero bars on your 2013 Nissan Rogue you would want the part numbers # Y00422, # Y28TR, # Y06123, and # Y06135. This will give you a roof rack that will be quieter than round or square bars.
view full answer... - Parts Needed to Carry 3 Bikes or 3 Longboard Surfboards with a 2018 Honda CivicTo transport the 3 longboards on the roof of your 2018 Honda Civic I recommend going with the Yakima JetStream crossbars system but with longer bars to accommodate all of your boards. Since the max amount of boards you can stack on a carrier is 2 we have to make sure there is enough room to place the longboards side by side. For a roof rack use the following: 60" JetStream Crossbars # Y00426 BaseLine Towers - # Y28TR Fit Kit - # Y06182 Fit Kit - # Y06183 Then for carriers I recommend...
view full answer... - How to Transport Bikes and Luggage with my 2020 Hyundai Kona ElectricNo, the Curt hitch part # C11529 you referenced will not fit on the electric models of the Kona and we don't have a hitch that will. To help haul your gear I do have another option available for you and that would be a roof rack system. This will allow you to add roof mounted bike racks and cargo carriers to the roof of your Kona and give you the storage you are lo0king for. If you have flush mounted rails that run front and back on your roof you would use part # TH712300, # TH710601,...
view full answer... - Best Way to Carry Cargo on the Roof of a 2005 Scion tCThe best option would be a cargo box installed on an aftermarket roof rack on your 2005 Scion tC. For a cargo box I would recommend the SportRack Vista XL Cargo Box part # SR7018. For a more economical option you could go with a Rightline Sport Jr. Rooftop Cargo Bag # RL100S50, this bag does not require the installation of a roof rack. I also recommend a protective pad, # RL100650, to protect the roof when using the bag. This would be great if you only occasionally plan to carry cargo...
view full answer... - Recommended Yakima Roof Rack for a 2024 Chevrolet ColoradoTo add a Yakima roof rack to your 2024 Chevrolet Colorado Crew Cab you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06137 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06123
view full answer... - Recommended Roof Rack for a 2024 Chevrolet Trailblazer w/ a Naked Roof Yes, I would be happy to! To add a roof rack to your 2024 Chevrolet Trailblazer with no roof rails or mounting points you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06183 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06187
view full answer... - Roof Rack Recommendation for 2016 Chevy Silverado 2500 with SunroofThe roof of a vehicle is part of the overall structure and strength of it. Vehicles with sun roofs have to have the roofs stabilized differently and it's a much more delicate process since a large portion of the roof is missing. Because of that we don't recommend track style roof racks with sun roof vehicles. Instead there is the Yakima rack part numbers # Y00409, # Y28TR, # Y03536, and # Y06122 which fits with your sunroof on your 2016 Chevy Silverado 2500.
view full answer... - Roof Rack and Kayak Carrier Recommendation for 2019 Volkswagen Jetta with Naked RoofAside from the Yakima roof rack part # Y06163, # Y06136, # Y00425, and # Y28TR for your 2019 Volkswagen Jetta you'll also need carriers for the kayaks. I really like the Yakima JayLow part # Y04073 as it's easy to load, padded, and can fold down when not in use. This would give you a great way to carry both of your kayaks on your Jetta. Then to lock it all you'd want the part # Y07206 which comes with enough cores for the roof rack and the carrier.
view full answer... - Shorter Bar Yakima Roof Rack for 2019 Hyundai Santa Fe with Naked Roof RecommendationI attached a picture that shows what the 60 inch long crossbars would look like installed on your 2019 Hyundai Santa Fe. You can see there is quite a bit of overhang on either side of the feet of the rack so a shorter bar would work well. So you'd want the part # Y00428 for the 50 inch bars # Y00425 for black. BaseLine Towers # Y28TR Front BaseClip Fit Kit # Y06151 Rear BaseClip Fit Kit # Y06154
view full answer... - Easy to Remove Roof Rack for 2019 Dodge DurangoThe great thing about roof racks is that they're easy to remove, so they're well suited for use on leased vehicles. Even if you decide to lease a different make and model of vehicle after 3 years, in a lot of cases you'll be able to use the same crossbars and towers on your new vehicle by switching out the mounting kits. Since your 2019 Dodge Durango has a no raised roof rails in place, all of the kits available to mount this will attach to the vehicle with clamps, to make installation...
view full answer... - Which Adapter for Yakima Round Bars on TimberLine Towers for 2021 Kia TellurideYes; we've got just what you're looking for to use your round bars on your new 2021 Kia Telluride. The Roundbar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03536 will work with the Yakima BaseLine Towers # Y28TR and allow you to use your existing Yakima round bars. You can add metal lock cores to your BaseLine towers with part # Y07204, as well.
view full answer... - Will etrailer.com J-Style Kayak Carrier Move Around on Yakima Round CrossbarsThe etrailer.com J-Style Kayak Carrier # E98878 that you referenced is compatible with your Yakima round crossbars and their rubberized brackets will limit a lot of the movement, but the cradles will still likely move around a bit on the bars until a kayak is actually loaded. Once a kayak is in place the cradles will secure to the round bars and won't move at all. This is really just the nature of round crossbars and standalone accessories like J-style cradles in general. The only way...
view full answer... - Yakima Roof Rack Options for 2015 Ford Edge Sport with No Existing Roof RailsThe Yakima round bar roof rack we offer for your 2015 Ford Edge Sport with no existing rails or crossbars is composed of 5 parts, items # Y00409, # Y28TR, # Y03536, # Y06102 and # Y06139, which are the items you referenced. All four Yakima roof racks for your 2015 Ford Edge are shown on the linked page. The BaseLine system with black bars consists of parts # Y00422, # Y28TR, # Y06102 and # Y06139.
view full answer... - Can Yakima Q Tower Roof Rack Work With 2021 Toyota RAV4 With Roof RailsAlthough we have a Yakima roof rack solution that will work on your 2021 Toyota RAV4, the Q-towers are pretty much obsolete at this point, and they were not compatible with raised roof rack rails and were meant for use on bare roofs. The good news you can re-use your crossbars if they're at least 48 inches long. You can assemble a compatible round bar roof rack using the following parts: • Yakima 48 Inch Round Crossbars, part # Y00408 • Yakima TimberLine Towers, part # Y33TR • Yakima...
view full answer... - Parts Needed to Use Older Yakima Viper Roof Bike Rack on a 2009 Subaru Outback WagonYour older model Yakima Viper Bike Rack (par 8002000) can definitely be mounted to your 2009 Subaru Outback Wagon. We need to go with your option 1 though as the Viper isn't compatible with the Mighty Mounts. A complete Yakima Round Bar Roof Rack uses the following parts: - 48" Round Crossbars # Y00408 - TimberLine Towers # Y33TR - RoundBar SL Adapter # Y03536 - Lock Core Kit # Y07204 (optional) As long as your round crossbars are at least 48" long you'll only need the TimberLine...
view full answer... - Roof Rack With 48 Inch Crossbars Recommendation For 2013 Subaru Outback WagonIf your 2013 Subaru Outback Wagon has the factory raised side rails, I recommend the Yakima Roof Rack With The TimberLine Towers. For this system you will need to order part # Y03536, part # Y33TR, and part # Y00408. This system includes 48 inch round crossbars. The Yakima JetStream system referenced above is one of the best on the market as far as quality and ease of use goes!
view full answer... - Towers Needed To Install Yakima RoundBar Roof Rails On a 2019 Toyota 4Runner SR5 with Factory Roof RTo mount your current Yakima RoundBar crossbars to your 2019 Toyota 4 Runner you will need the Towers # Y33TR, and Adapters # Y03536. These will contain 4 towers and 4 adapters to mount 2 crossbars.
view full answer... - Roof Rack Recommendation for 2016 Chevy Silverado 2500 with SunroofThe roof of a vehicle is part of the overall structure and strength of it. Vehicles with sun roofs have to have the roofs stabilized differently and it's a much more delicate process since a large portion of the roof is missing. Because of that we don't recommend track style roof racks with sun roof vehicles. Instead there is the Yakima rack part numbers # Y00409, # Y28TR, # Y03536, and # Y06122 which fits with your sunroof on your 2016 Chevy Silverado 2500.
view full answer... - Roof Rack for 2020 Hyundai Santa Fe With Naked RoofYes, since you have a naked roof on your 2020 Hyundai Santa Fe that is the information needed to get the right roof rack. That said, there is just one brand that makes a roof rack for your '20 Santa Fe that has a naked roof, which is Yakima. The parts for your Santa Fe will essentially be the same with the exception of the crossbar type, as you can choose from either round crossbars or aero crossbars. I definitely recommend going with the aero-shaped bars as they are going to be much quieter...
view full answer... - What Parts are Needed to Install a Yakima RoundBar Crossbars for a 2018 Highlander?If you are trying to use the same round crossbars for the flush rails on your 2018 Toyota Highlander, you will need three parts: 1. SkyLine Towers for Yakima Crossbars # Y53TR 2. Landing Pad 16 for Yakima SkyLine and Control Towers # Y00242 3. RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03536 These are all you need to adapt your existing setup on your 2008 Toyota Highlander.
view full answer...
- Which Yakima Roof Rack System For 2021 Toyota Tacoma and ShellTo mount one crossbar to your 2021 Toyota Tacoma Double Cab I recommend the Base Line Towers # Y28TR, Round 48" Crossbar # Y8810021, Round Bar Adapter # Y03536, and Base Clip Fit Kit # Y06128 if you are mounting the crossbar on the rear of the vehicle, or Base Clip Fit Kit # Y06145 if you are mounting the crossbar on the front of the vehicle. For your shell you can use your existing Yakima Round Crossbars or Round 48" CrossBars for Yakima Roof Rack System # Y00408. In addition you will...
view full answer... - Recommended Yakima Roof Rack Compatible with 2003 VW JettaThe Yakima roof rack you have in the photos has Q-towers and Q-clips which have been discontinued. The round bars can still be used if desired, but you will need to upgrade the towers and the fit kit to correspond. For your 2003 VW Jetta, the parts you need are: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y06166 Since it will require almost all new parts, If you want...
view full answer...
- Can Karrite Voyager Cargo Box Fit on Yakima Round Bar Roof RackYes, the Karrite Voyager cargo boxes can fit on Yakima Round Bar roof racks like the round bar roof rack that fits your 2006 Honda Ridgeline part numbers # Y00409, # Y03536, and # Y00147. The Voyager is compatible with round, square, aero, elliptical, and most factory crossbars.
view full answer... - Roof Rack Recommendation for a 2005 Subaru Impreza RSYou can add an aftermarket roof rack to your 2005 Subaru Impreza RS, but we will need to know if you have a sedan model with a naked roof or a wagon model with factory installed side rails to recommend the correct roof rack for your vehicle. I have attached a link to all of the roof rack options that we offer for your vehicle. Simply choose your style of roof and a list of all compatible roof racks will populate. If you have a sedan model with a naked roof, then I recommend looking at...
view full answer... - What Roof Rack Do You Recommend For My 2014 Dodge Durango With A Naked RoofIf I had to pick a roof rack for a naked roof application, I would stick with Yakima or Thule. I have more confidence in their roof rack fits. My roof rack recommendation is the Yakima roof rack with round crossbars. It will consist of the following: Round 58" CrossBars for Yakima Roof Rack System (QTY 2), part # Y00409, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, RoundBar SL Adapter - Qty 4, part # Y03536, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
view full answer... - How to Use Yakima RoundBar Crossbars on a 2022 Toyota Highlander with Bare Roof
It does not haveIn order to use Yakima RoundBar Crossbars on a 2022 Toyota Highlander with bare roof you'll need the following: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part # Y28TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 part # Y03536 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part # Y06153 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part # Y06132
view full answer... - Yakima Round Bar Roof Rack for 2023 Chevy TahoeI checked with Yakima and their 58 inch round bar roof rack part numbers # Y00409, # Y00145, # Y03536, # Y44UV is a fit for your 2023 Chevy Tahoe with he factory rack so this would give you what you are looking for.
view full answer... - Thule Roof Rack Recommendation for a 2012 Grand Cherokee Overland with Flush RailsI spoke to Thule about this issue and they said that they used to use the THKIT4019 to fit the Laredo Group E roof racks on the 2012 Jeep Grand Cherokee, but moving forward they are now using a different style clip system and that is why the THKIT4019 is no longer available. For your vehicle you would want the following parts to put an Thule Aeroblade roof rack like the one you referenced on your vehicle. Thule Aeroblade Load Bars # TH711520 Thule Rapid Traverse Foot Pack # TH480R Thule...
view full answer... - Widest Crossbar Spread Roof Rack Recommendation for 2013 Honda CRVFor your 2013 Honda CR-V the widest crossbar roof rack we have is going to be the Yakima roof rack part numbers # Y00409, # Y28TR, # Y03536, # Y06148, and # Y06152. The spread for this rack is 32 inches whereas most racks are around 27 inch. I can't recommend you widen the spread any more than that or use a track style rack as that will require permanent modification to the roof of your vehicle.
view full answer... - Recommendation For Carrying 3 Kayaks On 2003 Honda Odyssey With Factory Side RailsThe first thing you will want to do is consult your owners manual or with your dealership to make sure you do not exceed the roof weight capacity for your 2003 Honda Odyssey. The weight of 3 kayaks would probably be more than the weight capacity of any of the roof racks we offer for your Odyssey. If you are okay with a system for 2 kayaks I recommend the Yakima Roof Rack System. This system features round 48 inch crossbars that have a weight capacity of 100 lbs, which should be able...
view full answer... - Parts Needed for Yakima Round Bar Roof Rack on a 2017 Honda CR-V With Bare RoofSince you already have round bars, all you'll need is the roof rack feet, the round bar adapter and the clip kit. Yakima recommends 48 inch round bars. -For the BaseLine Towers feet, use # Y28TR -For the Round Bar adapters, use # Y03536 -For the BaseClip fit kit, use # Y06188 -You can lock the roof rack to the vehicle roof with the addition of the optional locks, part # Y07204 Those three parts will provide everything you need to install your Yakima Round Bars on your 2017 Honda CR-V...
view full answer... - Roof Rack for 2012 Toyota Prius with Sun RoofI checked with Yakima and their roof racks including the round bar setup # Y00409, # Y00146, # Y03536, and # Y06117 are a fit for your 2012 Toyota Prius and also work with the sun roof you have as well. You won't be able to (or want to) open the sunroof with the rack installed as it would interfere and cause quite a bit of noise. For a more aerodynamic setup we have the Jetsream rack # Y00426, # Y28TR, and # Y06117 which also would fit and work well.
view full answer... - Will the Thule Force XT L Fit My 2020 BMW X5?Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
view full answer... - Lowest Cost Roof Rack Recommendation for 2020 Hyundai Santa Fe With Bare RoofThe lowest priced roof rack option we offer for the 2020 Hyundai Santa Fe with a bare roof would be a round bar rack from Yakima. The rack would consist of the following parts: • Yakima 48 Inch Round Crossbars, part # Y00408 • Yakima BaseLine Roof Rack Towers, part # Y28TR • Yakima SL Round Bar Adapters, part # Y03536 • Base Clip Fit Kit # Y06151 • Base Clip Fit Kit # Y06154 Unfortunately, the Malone # MPG215 rack you'd looked at isn't' a fit for your Santa Fe. I've linked you to an...
view full answer... - Fitment of the Thule Pulse M # TH614 with Yakima JetStream Crossbars on a 2002 Audi A4 SedanYes! If you have Yakima JetStream Crossbars installed on your 2002 Audi A4 Sedan with a bare roof, the Thule Pulse M # TH614 can clamp onto the crossbars with no problems. This is because the height and width of the JetStream crossbars are the exact same as the Thule WingBar Evo Crossbars. If you need a complete roof rack, you need the following components: - Yakima JetStream Crossbars - Black - 50" Long # Y00425 - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - 2 sets...
view full answer... - Yakima Roof Rack Parts for a 2015 Kia CadenzaThe Yakima parts needed to install a roof rack on your 2015 Kia Cadenza are the following: - 50" JetStream Crossbars # Y00425 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y27FR and # Y06126 - Lock Core Kit # Y07204 The "Y27FR" is our number for the BaseClip 197 you referenced.
view full answer... - 70 Crossbar Recommendations to Use Thule Hullavator on a 2021 Ford F-150 SupercabYes! In order to have the 70-inch crossbars to use with a Hullavator # TH898 on your 2021 Ford F-150 Supercab, I recommend the following parts: - Yakima JetStream Crossbars - 70" # Y00427 - Yakima BaseLine Towers # Y28TR - 2 sets of the BaseClip Fit Kit # Y27FR - Yakima Same-Key Locks # Y07204 Not only do you receive an extremely aerodynamic system on your roof with the JetStream crossbars, you also have the required 4 inches of length past the feet in order for the Thule Hullavator...
view full answer... - Recommended Base Clips for 2020 Chevrolet Silverado Crew Cab 3500For a Yakima roof rack that fits your 2020 Chevy Silverado 3500 we have the part numbers # Y00422, # Y28TR, # Y27FR, and # Y06124 which is their Corebar rack. Of these part numbers the clips are part numbers # Y27FR and # Y06124. The clips won't scratch the paint either.
view full answer... - Roof Rack Recommendation with Longer Crossbars for 2020 Chevy Silverado 3500 Long BedYakima has roof racks that do fit your 2020 Chevy Silverado 3500 Crew Cab like the HD bar rack part numbers # Y01157, # Y28TR, # Y03541, # Y27FR, and # Y06124 which gives you a 60 inch bar setup with plenty of weight capacity. This would be best way to carry the accessories you have now as the ladder racks have wider bars than what standard roof rack accessories can fit. Then for a fold up tonneau cover the BAKFlip F1 part # BAK37FR would be a really great option as well that is confirmed...
view full answer... - Which Yakima BaseClips Fit 2021 Ford F-150I checked with Yakima and for the 2021 Ford F-150 the correct Baseclips are the 197 clips part number # Y27FR.
view full answer... - Roof Rack Recommendation for 2024 Chevy Silverado 3500HD to Carry Yakima ShowdownHey Ross so I would recommend going with a Yakima JetStream roof rack for your 2024 Chevy Silverado 3500HD that consists of part numbers # Y00426, # Y28TR, # Y27FR, # Y06124 as we have found the Jetstream racks are the nicest and easiest to use. And we also know the Yakima Showdown part # Y04081 was tested with this rack and works great as well.
view full answer... - Recommended Roof Rack For A 2023 Ford F-150 Lightning The Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR29XR would be the closest design to a "fixed" system like you were wanting. That being said, I personally prefer the Yakima HD line over most other roof rack/crossbar systems. The HD bars have a much sturdier design and come with fixed mounting points on each end of the crossbars so that you don't have to purchase additional components to secure your accessories. For your 2023 Ford F-150 Lightning you would need the following components...
view full answer... - Recommended Roof Rack for a 2024 Chevrolet Silverado 2500 Crew Cab To add a roof rack to your 2024 Chevrolet Silverado 2500 Crew Cab, you will want the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 I have attached a couple of pictures below that will give you an idea of what this system will...
view full answer...
- Yakima BaseClip Kit 197 For a 2022 Ford F-150No, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06192 are not the 197 BaseClips that you are needing. You will want to use the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y27FR, which is the 197 BaseClip kit that you are needing.
view full answer... - Recommended Roof Rack Components To Mount A Yakima ReelDeal To A 2021 Ford F-150 The Yakima ReelDeal Rooftop Fishing Rod Carrier # Y04089 is compatible with round bars so to get them attached to your Yakima Round Bars # Y00409 and onto the naked roof of your 2021 Ford F-150 you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y27FR
view full answer... - Recommended Roof Rack for a 2024 Chevy Silverado 2500 To add a set of crossbars to the roof of your 2024 Chevy Silverado 2500, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. It fits both the crew cab and double...
view full answer... - How to Add Crossbars to a 2024 GMC Sierra 3500To add a roof rack to your 2024 GMC Sierra 3500 Crew Cab or Double Cab, you will want the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same...
view full answer... - What Are the Dimensions of the Yakima BaseLine Towers With the Crossbars and BaseClipKason, the BaseLine Towers for Yakima Crossbars # Y28TR (4") paired with the BaseClip Fit Kit # Y27FR & # Y06124 (1"), and the Yakima JetStream Crossbars # Y00430 will leave you with approximately 6 1/2" from the top of crossbar to the top of your roof. You can take an inch and an eighth off that to get the measurement from roof to the bottom of the crossbar so that'd be 5 3/8".
view full answer... - Yakima Towers & Fit Kit For 2023 Ford F-150 SuperCrew For Yakima Round CrossbarsHi there Dale; yes you can absolutely just get the towers and fit kit for your 2023 Ford F-150 SuperCrew from Yakima to utilize your round crossbars. All you need is the following: - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y27FR - RoundBar SL Adapter # Y03536
view full answer... - Recommended Roof Rack for a 2020 Chevrolet Silverado 3500The roof rack I recommend for a 2020 Chevrolet Silverado 3500 is the Yakima Jetstream Crossbar System part # Y00426, part # Y28TR, part # Y06124, and part # Y27FR. This is an excellent option and will work well with the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 so long as you alternate their direction. The system is a custom fit so it will look nice on the roof of a new vehicle and it has aero crossbars for the best wind resistance.
view full answer... - How To Secure Kayaks On 2020 GMC Sierra 3500 While 5th Wheel TowingGenerally speaking, you'll want the kayak centered in the carrier but you can push it a bit further forward if you have potential clearance issues with say the nose of a trailer. That said, there aren't really specifics on the overhang, you'll just need to use your best judgment. There will however be exact spots the crossbars will be installed as these are the points on the roof that the rack manufacturer deem strongest. The Yakima JetStream Crossbar System composed of part # Y00427, part...
view full answer... - Will Crossbars Interfere With The Panoramic Sunroof Of A 2023 Ford F-150 Yes, any roof rack, including the Yakima BaseLine FX Roof Rack for Naked Roofs # Y56UV, would most likely prevent you from being able to open your panoramic sunroof. Even if the crossbars clear the glass there's always the chance that whatever weight you out on top of them could cause them to dip down enough and touch so roof rack manufacturers don't ever approve of opening the sunroof while the crossbars are installed. If you'd still like to use these crossbars then you'll also need...
view full answer... - BaseClip Fit Kit for a Yakima Roof Rack on a 2022 Ford F-150I would be happy to help you. To attach the BaseLine Towers for Yakima Crossbars item # Y00146 to your 2022 Ford F-150 naked roof you will need the following parts: HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y27FR The correct crossbars are item # Y01157.
view full answer... - Trailer Hitch or Roof Mount Cargo Carrier for a 2014 Kia CadenzaThe Yakima EXO Swing Away Enclosed Cargo Carrier - 2" Hitches - 10 cu ft - 100 lbs # Y62VR is a great carrier, but it will not work for your 2014 Kia Cadenza. The only hitch available for your Kia is the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12118. This hitch will only work with accessories for 1-1/4" receivers. The Yakima EXO requires a 2" hitch. If you install the Curt hitch # C12118 on your Kia, you could use a cargo carrier like the 20x47 Reese Cargo Carrier...
view full answer... - Best Roof Rack and Four Fishing Rod Holder for a 2019 Ford RangerThe roof rack I recommend for a 2019 Ford Ranger is the Yakima JetStream Crossbar System which consists of part # Y00425, part # Y28TR, and part # Y06124. The Yakima JetStream Crossbar System is one of the best options on the market which has aero shaped crossbars which work to reduce wind noise/drag and rubber padded feet to protect the vehicle's finish. The fishing rod carrier I recommend for the 2019 Ford Ranger with Yakima JetStream Crossbar System is the Yakima ReelDeal Rooftop Fishing...
view full answer... - RetraxONE XR Compatible Ladder Rack and Roof Rack Accessory Recommended for 2020 Ford RangerThe # RTT-60335 RetraxONE XR hard tonneau cover you'd looked at would be a great choice for your 2019 Ford Ranger. For a ladder rack, I'd recommend the Yakima OverHaul HD, part # Y01151-58. You'll also need the adapter mount, part # Y01155 which allows the ladder rack to mount to the rails incorporated into the RetraxONE XR tonneau cover. Yakima tells me that the 68 inch crossbars included with this ladder rack are what's recommended for the Ranger pickup, and would be compatible with the...
view full answer... - Roof Rack Recommendation for 2023 Ford Ranger with Naked RoofI attached a link to a page that has all of the roof racks that fit your 2023 Ford Ranger with a naked roof like the Yakima JetStream rack part # Y00428, # Y28TR, # Y06124. When we had the chance to test fit all of the roof racks we carry we all agreed that the Yakima Jetstream was the nicest so you'd be very happy with this option.
view full answer... - Parts For Single Bar Roof Rack & Single Bar Ladder Rack on Retrax XR Tonneau on 2024 GMC Sierra 3500Okay, this is going to be quite a few parts but I'll go ahead and list out everything for a single bar roof rack and single bar ladder rack for your 2024 GMC Sierra 3500 and the RetraxPRO XR Hard Tonneau Cover # RTT-80485: Roof Rack Parts - Yakima BaseLine FX # Y83TR - BaseClip Fit Kit # Y06124 Ladder Rack Parts - Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Rack # Y47TR - Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Rack # Y67TR - Tonneau Cover Adapter Kit...
view full answer... - Recommended Base Clips for 2020 Chevrolet Silverado Crew Cab 3500For a Yakima roof rack that fits your 2020 Chevy Silverado 3500 we have the part numbers # Y00422, # Y28TR, # Y27FR, and # Y06124 which is their Corebar rack. Of these part numbers the clips are part numbers # Y27FR and # Y06124. The clips won't scratch the paint either.
view full answer... - Parts Needed to Add Yakima CoreBar Roof Rack to 2021 Ford RangerYou'll just need to add a couple parts to your 2021 Ford Ranger to use the Yakima CoreBar Crossbars # Y00421: - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06124 The only other thing you may want (which is optional) are lock cores to secure the rack to your Ranger and help protect your investment; you can do so with the Yakima Same Key System (SKS) Lock Cores # Y07204.
view full answer... - Largest Rhino-Rack Pioneer Platform For Crossbars on 2020 Ford RangerYep, the largest Rhino-Rack Pioneer for crossbars that will fit your 2020 Ford Ranger is indeed the 58" x 47" option: - Rhino-Rack Universal Pioneer Platform Rack for Crossbars # RR42115BF The Pioneer is a really nice system which allows you to carry a lot of gear in a number of different ways; to tie down that gear you can use the Ratchet Strap Kit # RR43175 and/or the Eye Bolt Kit # RR43178. If you also need a roof rack on your '20 Ranger for the Pioneer, go with the Yakima which consists...
view full answer... - Roof Rack Recommendation with Longer Crossbars for 2020 Chevy Silverado 3500 Long BedYakima has roof racks that do fit your 2020 Chevy Silverado 3500 Crew Cab like the HD bar rack part numbers # Y01157, # Y28TR, # Y03541, # Y27FR, and # Y06124 which gives you a 60 inch bar setup with plenty of weight capacity. This would be best way to carry the accessories you have now as the ladder racks have wider bars than what standard roof rack accessories can fit. Then for a fold up tonneau cover the BAKFlip F1 part # BAK37FR would be a really great option as well that is confirmed...
view full answer... - Roof Rack Recommendation for 2024 Chevy Silverado 3500HD to Carry Yakima ShowdownHey Ross so I would recommend going with a Yakima JetStream roof rack for your 2024 Chevy Silverado 3500HD that consists of part numbers # Y00426, # Y28TR, # Y27FR, # Y06124 as we have found the Jetstream racks are the nicest and easiest to use. And we also know the Yakima Showdown part # Y04081 was tested with this rack and works great as well.
view full answer... - Recommended Roof Rack for a 2024 Chevrolet Silverado 2500 Crew Cab To add a roof rack to your 2024 Chevrolet Silverado 2500 Crew Cab, you will want the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 I have attached a couple of pictures below that will give you an idea of what this system will...
view full answer... - Recommended Roof Rack for a 2024 Volvo S90 w/ No Rails To add a roof rack to your 2024 Volvo S90, that does not overhang the side of your roof, you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y59UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
view full answer... - What is the Most Economical Roof Rack for My 2021 Ford Ranger with a Bare Roof?The most economical rack that doesn't require drilling for your 2021 Ford Ranger with a bare roof requires the following parts: - Round 48" CrossBars for Yakima Roof Rack System (QTY 2) # Y00408 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y06124 - (Optional for extra security) Yakima Same-Key Lock...
view full answer... - Which Yakima BaseClip is Front and Which is Back for the 2014 Chevy ImpalaThe Yakima JetStream roof rack that fits your 2014 Chevy Impala includes the following parts: 50" Yakima JetStream Crossbars - # Y00428 BaseLine Towers - # Y28TR Front BaseClip - # Y06124 Rear BaseClip - # Y06126 Lock Cores - # Y07204 (optional) I listed which clip should be in which position above but if I hadn't told you this, you can find these fitments in the instructions or on the Yakima website. Attached are some videos for you to check out!
view full answer... - Recommended Roof Rack for a 2024 Chevy Silverado 2500 To add a set of crossbars to the roof of your 2024 Chevy Silverado 2500, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. It fits both the crew cab and double...
view full answer... - How to Add Crossbars to a 2024 GMC Sierra 3500To add a roof rack to your 2024 GMC Sierra 3500 Crew Cab or Double Cab, you will want the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same...
view full answer... - What Are the Dimensions of the Yakima BaseLine Towers With the Crossbars and BaseClipKason, the BaseLine Towers for Yakima Crossbars # Y28TR (4") paired with the BaseClip Fit Kit # Y27FR & # Y06124 (1"), and the Yakima JetStream Crossbars # Y00430 will leave you with approximately 6 1/2" from the top of crossbar to the top of your roof. You can take an inch and an eighth off that to get the measurement from roof to the bottom of the crossbar so that'd be 5 3/8".
view full answer... - Recommended Roof Rack for a 2020 Chevrolet Silverado 3500The roof rack I recommend for a 2020 Chevrolet Silverado 3500 is the Yakima Jetstream Crossbar System part # Y00426, part # Y28TR, part # Y06124, and part # Y27FR. This is an excellent option and will work well with the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 so long as you alternate their direction. The system is a custom fit so it will look nice on the roof of a new vehicle and it has aero crossbars for the best wind resistance.
view full answer... - How To Secure Kayaks On 2020 GMC Sierra 3500 While 5th Wheel TowingGenerally speaking, you'll want the kayak centered in the carrier but you can push it a bit further forward if you have potential clearance issues with say the nose of a trailer. That said, there aren't really specifics on the overhang, you'll just need to use your best judgment. There will however be exact spots the crossbars will be installed as these are the points on the roof that the rack manufacturer deem strongest. The Yakima JetStream Crossbar System composed of part # Y00427, part...
view full answer... - Roof Rack For 2020 Ford Ranger to Install Yakima LockNLoad PlatformWe can get you set up with everything you need for your 2020 Ford Ranger so you can use the Yakima LockNLoad Platform Rack for Crossbars # Y05044-39. I checked with Yakima for you, and this the 55" long x 49" wide LockNLoad, which is the correct size for your truck. To mount it, all you will need is a Yakima roof rack, and you won't have to do any type of drilling as the LockNLoad will fit directly on the roof rack's crossbars. The correct roof rack for your 2020 Ranger is made up of the...
view full answer... - Parts Needed to Install Yakima Roundbar Roof Rack 2021 Ford RangerTo install a Yakima round bar roof rack on your 2021 Ford Ranger Supercrew with a naked roof you'd need the part numbers # Y28TR, # Y03536, # Y06124 since you already have the crossbars. Normally you'd additionally need the part # Y00408.
view full answer... - Are Yakima Same Key System Keys UniqueThe keys that come with the Yakima Same Key System (SKS) Lock Cores # Y07204 are not universal and will help prevent theft. On our site alone we have over 50 unique keys for replacement options so it isn't like there are 2-3 different possible keys someone could use to get the rack off. If you're planning to add the # Y00426 to your 2022 Ford Ranger you will also need the BaseLine Towers # Y28TR and the BaseClip Fit Kit # Y06124. You will be able to add the SKS Lock Cores # Y07204 to...
view full answer... - Parts Needed for Removing Lock Cores for Yakima Same Key System SKS Baseline TowersYou're looking for the Replacement Control Key for Yakima Same Key System # Y8007835, which will allow you to move lock cores from your existing Yakima towers to your new Baseline towers. This disengages the splines on the lock cores to allow them to be removed from towers, bike racks or cargo boxes equipped with Yakima SKS locks. It looks like you've got a 2019 Ford Ranger so the complete Yakima roof rack kit for your vehicle that uses the Yakima 48" Roundbars # Y00408 you were looking...
view full answer... - Roof Rack for 2017 Chevy SparkThere is a roof rack option for your 2017 Chevy Spark but the SportRack # SR1002 is not a fit. Instead, I recommend an option from Yakima. This rack consists of the Yakima CoreBar Crossbars # Y00421, BaseLine Towers # Y28TR, and Fit Kit # Y06124; you can lock this roof rack with SKS Lock Cores # Y07204. This will give you an aero roof rack that helps reduce the amount of wind noise you might otherwise encounter.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.