Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Silver - Qty 2
(50 reviews)
Price: $688.85
Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Silver - Qty 2
Item # Y79HB
Our Price: $688.85
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (50)
- Q & A (0)
- Videos (45)
- Photos
Yakima Roof Rack - Y79HB
- Aero Bars
- Crossbars
- 50 Inch Bar Space
- Yakima
- Silver
- Overhang
- 2 Bars
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 50" Long - Silver - Qty 2:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Clear anodized alloy finish is corrosion resistant
Yakima SightClip 31:
- Custom-fit clips and pads allow you to mount 4 SightLine or RidgeLine towers on your vehicle with flush, factory side rails
- Inner and outer clips tighten together with a single bolt for even, secure grip on rails
- Snap into place on DropHooks inside towers
- Powder coated stainless steel clips are durable and rust resistant
- Molded rubber pads fit the contour of your side rails
- Clip onto bottoms of towers
- Protect side rails from scratches and abrasions
Yakima SightLine Towers - Qty 4:
- 4 Low-profile towers mount Yakima crossbars to your vehicle with flush, factory side rails
- Pair with 2 Yakima crossbars and SightClips or RidgeClips to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Pivoting bases automatically adjust during installation to ensure towers are seated correctly
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima JetStream crossbars
- Safe and easy installation with included torque tool
- Clip holder adjusts on 3 axes for perfect fit on your flush rails
- SightClips or RidgeClips attach to hooks in tower assemblies and tighten together for even, secure grip on rails
- Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Durable, weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction
8000428 Yakima Jet Stream CrossBbars - Aluminum - 50" Long - Qty 2 - Silver
8006431 Custom Sight Clips and Pads for Yakima Sight Line and Ridge Line Towers
8001635 Yakima Sight Line Roof Rack Towers - Qty 4
Replaces Yakima RidgeLine Y00145
Video of Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Silver - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima JetStream Crossbars Roof Rack Installation - 2022 Mazda CX-9
Hey everybody. Cooper here at etrailer. Today we're going to be taking a look at our Yakima roof rack system and how to install it. It does come in three major components that we'll get into as we start to talk about 'em on our 2022 Mazda CX9. Now if you wanna carry around some of those longer items like skis or snowboards, maybe need some additional storage like your rooftop cargo basket, or just wanna keep some of those dirtier items outta your car like mulch or maybe fertilizer. The first thing we're going to need for all those accessories is a roof rack system.
The first component we're going to look at in our roof rack system is going to be our crossbar here. Now our crossbar is going to be the Jet Stream Yakima crossbar which just means it has this nice arrow design to it where kind of starts a little fatter in the front and tapers off towards the back. Now this is just to help with some of that wind drag and noise that usually comes with putting stuff on top of your roof. It's going to be made of aluminum, which just means it's going to stay lightweight and very rustproof as we take our roof rack through the elements. And we even do have a T track here up top and it's my favorite kind of T track where if you want to install accessory you just have to push it kind of down and set it to wherever you need.
We're not going to have to pull up our wind strip and cut it to different specs. A nice way that our crossbar does interact with our CX9 is that there is plenty of space here in case we wanna use any clamping accessories between our roof and our crossbar that they just fit right through. Don't have to worry about damaging your roof at all for that to clamp down. Also coming down to the bottom of the crossbar if you can see that there is no wind strip, your kit will come with one. But because there is no permanent installation on this we have opted not to put our wind strip in today.
Then it does fit nicely into our sightline tower here which is just what's going to be kind of the mid piece between our crossbar and our fit kit. It does have this plastic covering when you're all done. That just pops right off. Now all of our inner mechanisms and tie-down points are gonna be behind this guard which is kept in place by this plastic lock core which is just used by a flathead screwdriver to kind of unlock and lock. But you can replace this with the sand key system for Yakima, which is a metal lock core using a key in case you have any other Yakima products or just want to upgrade to a key system instead.
The last piece to talk about in terms of our overall roof rack system is going to be the fit kit which is going to sort of have that custom molding to our vehicle. You can see that there's a hole right here. There's actually one right behind our fit kit as well and there's a little piece of rubber that you'll be able to see during the install process that really helps secure it all down. And looking on the outside here too our clamp does kind of fit into a little ridge on top of our CX9 system. So overall it just allows our roof rack system to have a really secure and custom fit to our CX9. Speaking about our system overall, our crossbars are 50 inches here which I think do sit really nice and flush here with our CX9. But I think if you did want to go up to the next size just to get some more usable space if you have a lot of accessories you wanna carry around or just want more easable access to something like rooftop cargo bags, that would be possible. The only thing is remember as you go farther and farther out from your vehicle the more dangerous it is kind of getting in and out making sure you don't hit your head. Now the install process for this roof rack system is pretty involved. It might be a little time consuming but as long as you're patient and follow the step-by-step guides in the instruction you might still find yourself running to a couple of snags. But thankfully we're gonna show you how that install process works right now. Now the first thing we're gonna need to do is set up our legs so they can go onto our crossbars. Now this is how it's going to come out of the kit. So the first step is going to be that we're going to need to remove this outer shell here revealing its inner one, and we're going to go ahead and take our flathead screwdriver and unlock this which just does expose all of the internals. We're going to need to take our included Yakima tool and unscrew this right here. And that will reveal secret door that we're gonna point out later. And then we're gonna go ahead and unscrew this a little bit ahead of time because this is where we are going to set up our clamps on. And then if we flip this over we can see that this by unscrewing that first bolt this is the little secret door that we have revealed that is going to be for the top of this guy right here. We are going to go ahead and take our plastic piece here, kind of just make sure that it's centered up with that and then drop in this piece which is going to be what secures our leg to its crossbar. You just kind of have to jiggle that into place holding it in place, flipping this around and then taking our included Yakima tool and tightening it down just a little bit so that way they become secured to each other but not enough that we can't fit it into our crossbar. Now that our legs are ready we can install them on our crossbar. Looking at our crossbar we have an arrow crossbar here today which means it's gonna be a little bit fatter in the front and kind of taper off towards the back. That's going to be the easiest way to tell you which way is the front and back. But we're gonna go ahead and flip it over. And we went ahead and marked an arrow facing towards the front, which really helps us whenever we have to install using this crossbar. So if you're looking for something to help you out that could be a good idea as well. Taking off our end caps here on both sides we are then going to go ahead and grab one of our legs and then we are going to use the included measuring strips on here that you may or may not be able to see. They're kind of difficult. And then we are going to go ahead and take our included leg here, slide that in. And our measurement is 38 and seven eighths. So we're gonna go ahead and find that on our strip and making that measurement line up with the back of our leg. And now we can go ahead and take our include Yakima tool and tighten them down a little bit but we don't wanna tighten them down all the way 'cause we still need to set the pitch. So taking a look at the leg of our crossbar system we can see the little bolt down here. So what the pitch basically means is we go ahead and push our tower towards the front of our crossbar. This is going to be the A positioning, B is going to be with it kind of sitting in towards the center. And C is going to be if we move the bolt towards the back. Now the measurement here and the pitch can be different depending on the system and your vehicle specifically. So make sure that you are checking which ones you are going to need. And this case we are going to need the C so we're gonna go ahead and take our included tool and tighten it down in this position. Now with our legs installed, we're going to go ahead and put our pieces in that make up our fit kit. The first one is going to be this pad here that actually has the same number regardless of of it's the front crossbar, the back crossbar, left or right. They all have the same code on them. We're going to go ahead and take it, making sure that our arrow is pointing out of our crossbar and come to about the middle of our crossbar here where we'll be able to see where it's going to just clamp right down into place. You'll hear a little click. That'll let you know that you did that right. (click) The next one we are going to do is going to be one of the sides of our clamp and we need to go ahead and take our fingers real quick and remove the retaining clip right here. And then this guy should just slide right in. (clanging) But you may find yourself needing to loosen it up a little bit with that same bolt that we did earlier if it's giving you a little bit of trouble. (clanging) There we go. And then we should be able to fit our piece around those hooks down there and then when we give it a good tug up you'll notice that it is in place and then we'll go ahead and replace that back in. Now if we come over to the front you'll see a very similar system that we just go ahead and pinch and we'll have go ahead and loosen that up. And for this we actually want to tighten this bolt back down because we are going to be fitting this between this hole right here, which means that if we don't tighten down this bolt that our clip is not going to be able to get past that. The process is going to be the same over on this side here. I did just wanna go ahead and point out that our clip here, R9, is going to be the one that sits inside our inner crossbar and our clip R14 is going to be the one that sits outside of our crossbar. which is designated in the instruction manual. Now that our crossbar is ready to go we're gonna have to know where to put it. So by taking a soft tape measure we're going to start at the front of our front crossbar. And since we already took measurement out of our construction manual we're gonna know that that's 28 inches. We're gonna go ahead and mark that. And then reaching over here to zero, we know that this is going to be where the front of our rear crossbar starts. Now your kit is going to come with some stickers to temporarily place here for you to mark that, but since we don't have those, I'm just gonna go ahead and make a little mark with my finger knowing that's where the spot is that I have to come back to. One nice thing about our crossbar system is that one of our clamps here has a little bit of a nub on it that will actually fit into one of the holes on our rail system. So that's just nice to know as kind of a secondary measurement that you know you're placing your rails in the correct spot. And try to line it up with your mark the best you can. But make sure that you go ahead and check the other side, make that measurement, and maybe double check your measurement over here after you move that side a little bit to make sure that you didn't accidentally move your first side. Now that we've checked the measurement for our crossbars on both sides and know they're in the correct place we can go ahead and tighten them down. Now if you are doing this by yourself, you wanna go ahead and choose one side and maybe only tighten it down about 50%, then go around to the other side and do that kind of back and forth increasing in value because if you do it completely on one side, you'll end up pulling your system all one way. And we don't want that. We want it to be evenly distributed. So we are gonna go ahead and just tighten this down a little bit, until maybe we can start to feel some of that resistance. And we'll know once we are at the correct setting because our included tool is actually a torque tool, which will not allow us to tighten down anymore once we are at that appropriate setting. Now that our roof rack system is in place we're gonna go ahead and put all our covers back. The first one is going to loop around this little point right here. And swing around. There you go. And once you have that in place, we're gonna go ahead and take our flathead screwdriver that we used earlier to lock that into place. So putting our final caps on, this one just fits right on the front, (snapping) and snaps right into place. And then do not forget the one on your crossbars. And then go ahead and make sure you do this for all four of 'em and then go hit the road. Now overall I do think our Yakima roof rack system looks pretty good on our 2022 Mazda CX9. Once it's up there, I think it looks very sleek and it'll help you carry around some of those additional accessories that you're wanting to. The installation process, like we said before, is pretty involved and can be tricky at times, but if it's something that you find yourself just setting up or getting on your roof and never having to take off, it's not that big of a deal that it's only gonna be that first time installation, really setting everything up that's kind of a pain in the butt. But once you get through all that I think that's a really good option for us. But that was a look today here at our Yakima Roof Rack System on our 2022 Mazda CX9. My name's Cooper and thanks for watching.
Customer Reviews
Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Silver - Qty 2 - Y79HB
Average Customer Rating: 4.9 out of 5 stars (50 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: Jonathan05/24/2024
Works well, after getting them in place. On my Kia Sorrento it's very tricky to get the towers to fit the holes in the factory rails -- takes a lot of loosening and readjusting the bars.
by: Paul06/01/2023
2018 Toyota Corolla
Yakima Baseline with Yakima CBX 18 Cargo Box fitted on my 2012 Toyota Corolla S Sedan 2012.
Instructions were clear and roof rack was easily installed.
by: Tim 10/18/2023
One quick phone call and Gwendolyn figured out exactly what I needed for our new car to use my old Yakima rack.
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: MB07/12/2021
2019 Ford Ranger
The 50” jetstream cross bars were perfect for my 2019 Ford Ranger with my ARE cap. They are paired with the Yakima Skyline towers and appropriate landing pads (protip: call etrailer when you order to ensure you have the correct setup;)
These cross bars are SILENT on my cap. Zero wind noise. My daughter and I installed them on a Friday (I do recommend watching etrailer’s installation video in addition to the paper instructions) and left for a 700 mile weekend road trip the next day to pick up a kayak, paddle with friends downstate then drop her off at summer camp.
Even with empty Yakima Jaylows on top, no wind noise. Even with a boat in the Jaylows, no wind noise.
These are the sweetest rack’s I’ve had. With the Skyline towers and landing pads, they are also easy to take off and put on. Click click done.
They look good, too;)
etrailer customer service for the win, too. When I originally ordered, I did not order all the items I needed for installation. When I realized this, I called and they got me squared away.
by: James08/10/2019
2019 Subaru Forester
I’m using these towers in conjunction with the JetStream cross bars. Assembly and setup was easy, all the tools you need are provided, except perhaps a tape measure for mounting. Looks and feels solid and well made. This is my second set of Yakima towers and cross bars. I plan to use this setup for an old roof top hard shell case and for my mountain bike to get to the trail head.
After completing the installation I took it out for a spin to check for wind noise at highway speeds. No discernible noise, I’m very happy about that as I really don’t want to remove these when not needed. For reference these are mounted on a 2019 Subaru Forester Touring with factory raised rails. Plenty of clearance for attaching equipment and gear.
Side note: the gentleman that assisted me on the phone while ordering was very pleasant and helpful, got me the right products very quickly as I was in a time crunch. Two thumbs up!
by: Adam K05/14/2023
Pretty straight forward installation. Instructions were easy to follow.
by: Ginger05/22/2019
Great product - very good quality. I liked the fact that I could keep the risers mounted on my car, but could remove the cross bars. It took me awhile to install - but I'm not very mechanically inclined.
by: Richard06/28/2017
Honda
etrailer installation videos were very helpful in selecting the product and first installation, although in practice, minor adjustments to method were required. Now after more than a dozen set ups, mounting the crossbars takes 15 minutes, and taking them off, 10. The system is well made, and when mounted, precise, strong, and reliable. Expensive perhaps compared to alternatives, but well worth the money. Used to carry a 50# sailboard 40 miles to the beach on weekends. ('11 Honda Fit)
One minor shortcoming: rubber sheet glued to base clips where they touch the car body have torn and moved sideways 1/16", but expect will be easily replaced with readily available 1/16" sheet rubber (e.g., shower pan liner) when the time comes.
Used in rain at least once, (sustained 60mph), with no leaks.
by: Douglas10/11/2022
Good condition quality. Good and detailed instructions but aittle tedious install.
by: Beyhan A.02/21/2019
2018 Honda Ridgeline
I needed crossbars for my new 2018 Mazda CX5, which came with flush side rails. The Yakima crossbars, along with the RidgeLine Towers and the the vehicle specific kit worked great. The installation (10-15 min) is super easy. They look cool, and performed great (I strapped 160-lbs rooftop tent on them!). Removing them is also super easy (10 min tops). Highly recommend.
by: Nicholas07/11/2023
Order was easy to place and delivered in less than a week as promised. The sales advice was perfect fit despite multiple pieces having been ordered. Used the rack once and very sturdy
by: Phillip09/29/2021
Because of the 'rona-induced supply chain interruptions, I was unable to purchase all of my Yakima components from etrailer, but I did get these, and they are typically excellent Yakima components. Well-made, easy to install, good directions, no problems.
by: Bruce06/12/2019
I chose the Yakima roof rack, because It spanned 50 inches, rather than the leading competitor's 47 inches, making it better for tying down 4 ft x 8 ft sheets of building material. It also seemed to be about half the price. It took me about 2 hours to put it all together and mount it on my car. The instructions were all visual and there was one little pic I didn't understand, but the equipment seemed to go together correctly anyway. Now that it's adjusted, it should be fairly easy to remove and replace next time. I did need to put on super tacky gloves to get the covers off. Although it seemed unnecessarily complicated, I would still choose this product again.
by: Ivars07/04/2020
Yakima Jetstream cross bars.. nice bars worth the extra money. can be adjusted for pitch/angle of attack to "tune" the air profile.. mine have absolutely no high speed wind noise or whistling.. rubber weather strip underneath further smoothes the bar profile.. quietest roof rack system I have ever owned..
by: Joseph10/11/2021
Buick
I have a Buick Envision and it seemed as if it would be difficult to get the correct rack, but it turned out to be easy. I entered my vehicle info and was directed to the Yakima Skyline with flush rails. It was easy to install and they look great. I will be able to take my canoe out with no problem! Joe
by: Gina 08/04/2021
Lexus
I purchased the Baseline towers with base clip fit kit and jetstream crossbars. They were great quality and the instruction materials included for assembly and installation were great. I was able to assemble and install on my Lexus CT 200 in about an hour. It looks nice too!
by: Mark06/30/2023
Works as expected and feels solid
by: Earl07/28/2022
The crossbars are light and very strong. They fit perfectly and installed easily.
by: Tricia09/08/2018
2016 Honda Accord
Awesome experience and product! It shipped fast and was easy to install using the directions and a recommended video. Plus, it looks super hot attached to my white Honda Accord Coupe 2016. (I leave it on all year round.) Love it and etrailer!!
by: Carol07/24/2018
Excellent service!! I needed new crossbars as I purchased a new vehicle and l needed them in a hurry and I did receive them thank you.
by: Djones06/18/2018
Easy to install. No noticeable noise from the bars. Seem to be very sturdy.
by: Michael M.06/17/2017
As said in my other review these etrailer guys helped me where the Yakima customer service and sales people couldn't.
by: Cassidy04/08/2023
Arrived quickly; easy instal!
by: Gordy10/06/2016
Great fit, fairly easy instructions, I prefer printed instructions along with the pictures. All in all I recommend this product .
25
388
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Parts Needed to Add a Yakima Roof Rack to a 2024 Kia Telluride w/ Flush Rails Yes, we do! There are quite a few different options. To add a Yakima roof rack to your 2024 Kia Telluride with flush rails you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 in Black or item # Y00428 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y34UR
view full answer... - Best Roof Rack For 2024 Subaru Impreza HatchbackThe best roof rack for your 2024 Subaru Impreza hatchback with a naked roof is from Yakima due to how quiet it is as well as its durability. The roof rack that fits your Impreza is made up of the following parts: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SightLine Towers for Yakima Crossbars # Y64AR - Landing Pad 22 for Yakima Towers # Y00248 The JetStream bars are quiet because have what are called "WindRidges" on top that control the flow of the air both over...
view full answer... - Recommended Roof Rack for a 2024 Honda CR-V w/ Flush Rails Yes, we do have the parts you will need and congrats on the new vehicle. To add a roof rack to the flush rails on your 2024 Honda CR-V you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UR This aero bar roof rack system has a 165 lbs capacity....
view full answer... - Can a Roof Rack Be Installed on a 2024 Toyota Sienna?Yes, a roof rack can be installed a 2024 Toyota Sienna. The easiest way is if yours has the raised rails on the top of your roof. If your 2024 Sienna has raised roof rails, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR This aero bar roof rack system has a 165 lbs...
view full answer... - All Parts Needed to Add Yakima Roof Rack to 2023 Kia Niro EV With Flush Mounted RailsCorrect, the SightClip 25 is indeed our part number # Y27AR. To mount the Yakima roof rack to your 2023 Kia Niro EV, here are all the parts you'll need: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SightLine Towers for Yakima Crossbars # Y64AR - SightClip Fit Kit # Y27AR You made a really nice choice going with the Yakima rack for your Kia, as it will give you a quiet, durable, easy-to-use roof rack that also looks great. The only other thing I recommend considering...
view full answer... - Will the Thule Pulse Cargo Carrier fit on My 2012 Subaru Outback?Yes, as long as you have a set of round, square, aero, elliptical, or factory crossbars, the Thule Pulse Large Rooftop Cargo Box # TH615 will fit your Outback. If you do not have a set of crossbars, you can add a set with the Yakima JetStream Crossbars # Y00428, and the SkyLine Towers for Yakima Crossbars # Y53TR, as well as the Landing Pad 13 for Yakima SkyLine and Control Towers # Y00239.
view full answer... - Recommended Roof Rack for a 2024 Subaru Legacy w/ No Roof Rails I would be happy to! To install a roof rack on your 2024 Subaru Legacy you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 in Black or item # Y00428 in Silver SkyLine Towers for Yakima Crossbars - Fixed Mounting Points - Qty 4 item # Y53TR Landing Pad 22 for Yakima SkyLine and Control Towers - Qty 4 item # Y00248
view full answer... - Will Rhino-Rack Crossbars Fit On Yakima BaseLine Towers? The top channel on most crossbars like the Rhino-Rack and Yakima are similar but you should never mix and match towers and crossbars between different manufacturers. Their components are designed to work specifically with each other and your Yakima towers may not work properly with the Rhino-Rack crossbars. Instead you will want to stay with the Yakima crossbars from the list below to ensure they fit together properly and you have a manufacturer who will stand behind the warranty for the...
view full answer... - Recommended Roof Rack for a 2024 GMC Terrain w/ Raised Rails I would be happy to narrow down the options and give you a parts list. To add a roof rack to your 2024 GMC Terrain with raised rails, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima...
view full answer... - Recommended Roof Rack for a 2024 Honda CR-V w/ Flush RailsTo add a Yakima roof rack to your 2024 Honda CR-V with flush rails you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204...
view full answer... - Availability of Black 50 inch Yakima Jetstream CrossbarsYes we do have 50 inch Yakima JetStream crossbars in black with the part # Y00425 which is a pair of them.
view full answer... - Yakima Roof Rack Fit For 2024 Subaru Outback WildernessSure can; I checked with Yakima and the correct parts for a Yakima roof rack on your 2024 Subaru Outback Wilderness are the following: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - TimberLine Towers for Yakima Crossbars # Y33TR I also recommend protecting your investment by adding locks to secure the rack; you can do this with the Yakima Same Key System (SKS) Lock Cores # Y07204.
view full answer... - Roof Rack For 2015 Jeep Cherokee w/ Raised Rails For SkyRise Rooftop TentFirst, thank you for the photo, it was very helpful and does show raised side rails on your 2015 Jeep Cherokee. And there is indeed a Yakima roof rack that fits your '15 Cherokee, with the Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 and TimberLine Towers # Y33TR. That said, I do recommend considering an alternative, from Rhino-Rack. Reason is you will get the exact same quality and function with the Rhino-Rack that you'll get with the Yakima, but at a lesser cost so...
view full answer...
- Does Thule Force XT XL Rooftop Cargo Box Fit Yakima Roof Rack on 2023 Acura MDXYes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails. Bare Roof - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06163...
view full answer... - Solution For Transporting 4 Various Types Of Bikes On A 2020 Kia SoulI have a solution for you, but since the 2020 Kia Soul can only use a Class 1 hitch receiver, you will be limited to hauling only two bikes on the hitch receiver. A trunk-mount bike rack will be your best option for carrying up to 3 bikes on your Kia Soul. I would look into the Malone Hanger BC3 OS 3 Bike Carrier # MPG2139 which is confirmed to fit your vehicle. It can safely hold 3 bikes weighing up to 33lbs each; the carrier only weighs 15lbs making it very easy to install with one person....
view full answer... - Roof Rack For 2021 Subaru Outback For Rooftop TentTo use a rooftop tent on your 2021 Subaru Outback, you will need to add a roof rack, which will allow you to choose from a couple of different tent options. First let's start with the rack you'll need, which is from Yakima and consists of the following parts: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 27 for Yakima SkyLine and Control Towers # Y46VR This is going to give your '21 Outback a very quiet,...
view full answer... - Parts Needed to Add Yakima Roof Rack to 2014 Acura MDX w/ Flush-Mount Side RailsIn order to add a Yakima roof rack to your 2014 Acura MDX with flush side rails, you will need the following parts: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 19 for Yakima SkyLine and Control Towers # Y00245
view full answer... - Recommended Roof Rack for a 2023 Honda HR-V w/ a Naked RoofTo attach a roof rack to your 2023 Honda HR-V, with no roof rails, you will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 item # Y00428 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06159 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06181 These crossbars have a 165 lbs capacity....
view full answer... - Recommended Roof Rack for a 2023 Chevy Bolt EUV w/ Side Rails Yes, there is a way to mount a roof rack to the side rails of your 2023 Chevy Bolt EUV. You will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 item # Y00428 SkyLine Towers for Yakima Crossbars - Flush Rails, - Qty 4 item # Y53TR Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 These crossbars have a 165 lbs capacity. The skyline towers and landing pads will attach to your...
view full answer...
- Yakima Roof Rack that Fits 2024 Subaru Crosstrek with Raised Side RailsFor your 2024 Subaru Crosstrek has raised side rails you'd want the Jet Stream roof rack part numbers # Y00425 and # Y33TR.
view full answer... - Which Roof Holes to Use to Install Yakima Landing Pad 22 on 2019 Subaru WRXI checked with Yakima and the Landing Pad 22 part # Y00248 is correct for your 2019 Subaru WRX to install the Skyline towers part # Y53TR and bars like the JetStream part # Y00428. According to the instructions for the Landing Pad you would want to use the front most holes for the front bar and the rear most for the rear bar once the cover plates of the vehicle are removed.
view full answer... - Recommended Roof Rack and Locks for 2024 Toyota RAV4 Hybrid With Yakima ShowDownI'm glad you want to stick with Yakima since it is what I would have recommended regardless. For your 2024 RAV4 with flush rails I recommend the Yakima JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00425 (black) OR # Y00428 (silver) -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 23 for Yakima SkyLine and Control Towers # Y98FR -Yakima Same Key System Lock Cores (QTY 6) # Y07206 for the rack and ShowDown OR # Y07204 for just the rack. The...
view full answer... - Does Yakima Roof Rack For 2013 Toyota Prius Require Professional InstallI would tell them they could do it and not to bother with spending money to go to a mechanic or the dealer. Do you have a measuring tape of some sort? If so, that's it regarding the needed tools to install the Yakima rack on your 2013 Toyota Prius. So no tools are needed, it's light as a feather, and all you have to do is some measuring to get it installed. I am 1000% confident this is something you can do on on your own in about 30 minutes without any assistance. The correct fit for the...
view full answer... - What Crossbars Fit My 2022 Hyundai Palisade with Flush Rails?For your 2022 Hyundai Palisade with flush roof rails, I recommend the reliable and attractive Yakima Jetstream crossbars. You will need the following parts: Yakima crossbars: # Y00428 Yakima towers: # Y64AR Yakima fit kit: # Y79AR The weight capacity is 165lbs, but you'll want to verify the weight rating of your vehicle's roof by checking the owner's manual.
view full answer... - Parts Needed to Add a Yakima Roof Rack to a 2024 Kia Telluride w/ Flush Rails Yes, we do! There are quite a few different options. To add a Yakima roof rack to your 2024 Kia Telluride with flush rails you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 in Black or item # Y00428 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y34UR
view full answer... - Best Roof Rack For 2024 Subaru Impreza HatchbackThe best roof rack for your 2024 Subaru Impreza hatchback with a naked roof is from Yakima due to how quiet it is as well as its durability. The roof rack that fits your Impreza is made up of the following parts: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SightLine Towers for Yakima Crossbars # Y64AR - Landing Pad 22 for Yakima Towers # Y00248 The JetStream bars are quiet because have what are called "WindRidges" on top that control the flow of the air both over...
view full answer... - Recommended Roof Rack for a 2024 Honda CR-V w/ Flush Rails Yes, we do have the parts you will need and congrats on the new vehicle. To add a roof rack to the flush rails on your 2024 Honda CR-V you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UR This aero bar roof rack system has a 165 lbs capacity....
view full answer... - Recommended Roof Rack for a 2024 Kia Telluride w/ Flush Roof Rails Congrats on the new SUV! To add a roof rack to your 2024 Kia Telluride with flush rails you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # for Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y34UR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System...
view full answer... - All Parts Needed to Add Yakima Roof Rack to 2023 Kia Niro EV With Flush Mounted RailsCorrect, the SightClip 25 is indeed our part number # Y27AR. To mount the Yakima roof rack to your 2023 Kia Niro EV, here are all the parts you'll need: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SightLine Towers for Yakima Crossbars # Y64AR - SightClip Fit Kit # Y27AR You made a really nice choice going with the Yakima rack for your Kia, as it will give you a quiet, durable, easy-to-use roof rack that also looks great. The only other thing I recommend considering...
view full answer... - How To Carry Skis and Snowboards on a 2017 Lexus NX 200t With Flush Side RailsSo long as you have flush side rails on your 2017 Lexus NX 200t then I do have options for you to carry both your three snowboards and a pair of skis. For the roof rack, I recommend using the Yakima JetStream Crossbar System which is composed of part # Y00426, part # Y64AR, and part # Y59AR. The JetStream system has aero crossbars for reduced wind noise and integrated channels for use with channel mounted accessories. For a roof rack mounted ski carrier, I recommend the Yakima FatCat...
view full answer... - Recommended Roof Rack for a 2023 Kia Niro PHEV We have a set up that will allow you to add crossbars, however I checked with our vendors and did not see a hitch available for the 2023 Kia Niro PHEV and there's no indication that one is coming. Nobody made one for the 2022 either so it's not looking like there's going to be one. To add a set of crossbars to your Kia Niro, I recommend the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine...
view full answer... - Recommended Yakima Roof Rack for a 2024 Hyundai Palisade w/ Flush Roof Rails Yes, it will and congrats on the new SUV. The parts listed below will add a Yakima roof rack to your 2024 Hyundai Palisade: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y79AR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent...
view full answer... - Recommended Roof Rack for a 2024 Honda CR-V w/ Flush RailsTo add a Yakima roof rack to your 2024 Honda CR-V with flush rails you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204...
view full answer... - Aero Bar Roof Rack that Fits 2023 Kia Niro PHEVI have a roof rack solution that does fit your 2023 Kia Niro with flush bars but the Malone racks require a raised rail like you mentioned so it would not work. Instead you'd need a rack designed to attach to the flush rails like with the Yakima CoreBar roof rack part numbers # Y00421, # Y64AR, and # Y27AR which is a similar aero shaped crossbar to the Malone.
view full answer... - Recommended Yakima Roof Rack For a 2023 Maxda CX-5 With Flush Mounted Roof RailsI recommend going with the Yakima JetStream roof rack on your 2023 Mazda CX-5. You will need the Crossbars # Y00425, Towers # Y64AR and Fit Kit # Y39AR. These crossbars have the integrated channel for adding roof mounted accessories on your roof which are not capable of clamping around the bars. I recommend including the Lock Cores # Y07208. This will allow you to secure your roof rack and 4 other Yakima same key compatible accessories with the same key.
view full answer... - Can Thule Fit Kit Bolts for 2021 Mazda CX-5 Flush Rails Be ReplacedThe Replacement Bolts for Thule Fit Kit for Podium Style Foot Pack # 7524498001 are not the same style of bolts needed to secure a Thule roof rack to your 2021 Mazda CX-5 flush rails. I took a look at the instructions for 183160 fit kit designed for your vehicle and it looks like the correct replacement bolt is part 50435 but since this fit kit has been discontinued (as of May 2023) this isn't a part that's readily available. I imagine Thule will eventually come back out with a fit kit...
view full answer... - How to Transport 3 Bikes 1 E-Bike with a 2018 Subaru Outback WagonI do have a recommendation for you, but with your specific bike rack needs you don't be able to use your 1-1/4" trailer hitch on your 2018 Subaru Outback Wagon to carry all 3 bikes. Either the bike rack is way too heavy and requires a 2" receiver, like the Draw-Tite # 76227, or it doesn't have the attachment option you need, plus the weight capacity for your heavier bike. For your application you'll need to use a hitch bike rack and a roof mounted bike rack. The hitch mount bike rack I...
view full answer... - Does Thule Force XT XL Rooftop Cargo Box Fit Yakima Roof Rack on 2023 Acura MDXYes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails. Bare Roof - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06163...
view full answer... - Roof Rack For 2024 Honda CR-V For Two Thule HullavatorsYep, you can go ahead and mount the Thule Hullavator # TH898 to your 2024 Honda CR-V with a roof rack, and 50 inch bars will be long enough for one, but for two Hullavators you need 60 inch bars. For 60 inch bars the only option is a Yakima roof rack due to how they mount to the feet (longer Thule bars simply won't fit). So here is what you can use: - Yakima JetStream Crossbars - 60" Long # Y00426 - SightLine Towers for Yakima Crossbars # Y64AR - SightClip Fit Kit # Y44UR - Thule Hullavator...
view full answer... - Recommended Roof Rack System Compatiable With Yakima SkyBox Lo 15 On 2019 Subaru Outback WagonThe Yakima SkyBox Lo Rooftop Cargo Box you purchased will fit the 50" Yakima CoreBar Crossbars # Y00421 you were looking at, and will allow you to open the rear hatch without interference. To install the # Y00421 on your 2019 Subaru Outback Wagon you will need the SightLine Towers for Yakima Crossbars # Y64AR, and Fit Kit # Y32CR if your Subaru is the Touring model. If you do not have the Touring Model you will need the SkyLine Towers for Yakima Crossbars # Y53TR, and Fit Kit # Y00241. Both...
view full answer... - Parts Needed to Add a Yakima Jetstream Roof Rack to a 2024 Cadillac Escalade w/ Roof Rails I would be happy to! To install a Yakima roof rack to the rails on your 2024 Cadillac Escalade you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to...
view full answer... - Recommended Roof Rack For A 2024 Mazda CX-50 With Factory Flush RailsFor your 2024 Mazda CX-50 I recommend going with a Yakima JetStream Roof Rack. The JetStream bars will be compatible with the MegaWarrior # Y07080 basket, along with virtually any other roof rack accessory. The complete roof rack consists of the following parts: Yakima JetStream Crossbars # Y00425 SightLine Towers for Yakima Crossbars # Y64AR SightClip Fit Kit # Y27AR You also have the option of adding locks to the towers with part # Y07204.
view full answer... - What Crossbars Fit My 2022 Hyundai Palisade with Flush Rails?For your 2022 Hyundai Palisade with flush roof rails, I recommend the reliable and attractive Yakima Jetstream crossbars. You will need the following parts: Yakima crossbars: # Y00428 Yakima towers: # Y64AR Yakima fit kit: # Y79AR The weight capacity is 165lbs, but you'll want to verify the weight rating of your vehicle's roof by checking the owner's manual.
view full answer... - Roof Rack Recommendation for a 2020 Kia Telluride with Factory RailsWhen Thule discontinued the old square bars, they unfortunately stopped manufacturing the compatible roof rack feet, so there won't be a Thule fit kit that would be compatible with the vehicle and your Telluride. At present, Yakima is the only manufacturer offering a roof rack fit for the 2020 Kia Telluride. The kit you'll need will depend on whether your vehicle has the side rails that run along the edge of the roof, front to back. For the raised side rails, you can assemble a rack using...
view full answer... - Best Way to Carry Two Kayaks on 2019 Mazda CX-5 With Flush Side RailsWe do have a solution for you, but for your 2019 Mazda CX-5, the issue isn't only actually the weight capacity of the roof, it is that there is no way to fit a combination of the Thule Hullavator Pro Kayak Carrier # TH898 with the Yakima ShowDown Kayak Carrier # Y04081 (or two of either carrier) on any roof rack for your 2019 CX-5 because they take up far too much space on your crossbars. Additionally, there isn't enough space on roof rack crossbars for a '19 CX-5 to fit both a Hullavator/ShowDown...
view full answer...
- Platform Roof Rack Available For a 2022 GMC Yukon XL DenaliRyan, currently I do not see that Rhino-Rack has any options for your 2022 GMC Yukon XL Denali. We do have the Yakima HD Crossbars # Y01157, Towers # Y64AR and Fit Kit # Y44UV which would allow you to use the LockNLoad Platform Rack # Y45UV.
view full answer... - Recommended Roof Rack for a 2023 Mazda CX-50I have a great roof rack for your 2023 Mazda CX-50 but we have not had a chance to install it on a vehicle yet because they're so new. We have installed the rack I am recommending on other Mazda's with the flush mounted rails and they stick up right at 5" from the top of the rail to the bottom of the crossbar. I do not see you having any compatibility issues but I recommend taking some measurements of your sun roof open to confirm. To mount a roof rack to the flush mounted rails on your...
view full answer... - Recommended Roof Rack for a 2023 BMW X5I checked with Yakima and yes, you can definitely swap out crossbars to adjust the look. The 50" Yakima JetStream Crossbars item # Y00425 will work with the legs and fit kit for the recommended Yakima roof rack set up we have listed for your 2023 X5. I have listed the other parts you will need below including the 60" crossbars: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip...
view full answer... - Recommended Roof Rack for a 2023 BMW X5I checked with Yakima and yes, you can definitely swap out crossbars to adjust the look. The 50" Yakima JetStream Crossbars item # Y00425 will work with the legs and fit kit for the recommended Yakima roof rack set up we have listed for your 2023 X5. I have listed the other parts you will need below including the 60" crossbars: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip...
view full answer... - Recommended Roof Rack on a 2023 BMX X5 M50 w/ Flush Rails Thanks for the picture! The 60" crossbars might be a bit wide. The roof racks with the longer crossbars are typically used for kayak carriers or people that need to mount two bike racks. I recommend going with more of a flush mount set up and we do have one made by Yakima. It is the 2023 BMW X5 roof rack by Yakima and it includes the following parts: Yakima SightLine FX Roof Rack for Flush Side Rails - JetStream Aero Crossbars - Black - Qty 2 item # Y73UV SightClip Fit Kit for Yakima...
view full answer...
- Best Roof Rack for a 2022 BMW X3Thank you for reaching out! The best roof rack for your 2022 BMW X3 is the Yakima JetStream system that uses the following parts: 50" JetStream Crossbars - # Y00425 SightLine Towers - # Y64AR Fit Kit - # Y62CR Lock Cores - # Y07204 (optional) This system installs directly to the flush rails on the roof of your BMW X3 and gives you one of the quietest, sleek-looking roof racks on the market. Not only do you get the 165 lb weight rating, but you also get the most customized fit out there...
view full answer... - Are There 60" Crossbars for a 2018 BMX X3I do have an option for you but those are both pretty long crossbars for this vehicle, it's not something that you can add easily, or legally for that matter as the crossbars can't stick out further than the side mirrors in most states. That said, we do still have a setup for you such as the one below. Yakima CoreBar Crossbars part # Y00422 SightLine Towers for Yakima Crossbars part # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers part # Y62CR
view full answer... - Roof Rack Recommendation for 2023 BMW X5 with Flush Rails for Yakima Bike RackYakima has an OEM style roof rack that fits your 2023 BMW X5 with flush rails with the SightLine FX rack part # Y73UV and # Y62CR. This will give you a great looking and very quiet rack that will work well with your current Yakima bike rack.
view full answer... - Will Roof Rack Work with a 2020 BMW X3 with a SunroofIf Thule warns against using the Thule AeroBlade Edge Roof Rack on your 2020 BMW X3 with a sunroof, then I will second them. Instead, I recommend going with a system that has been shown to work with your sunroof. It's the Yakima Roof Rack. The crossbars are the JetStream Crossbars, part # Y00425. The towers are the SightLine Towers, part # Y64AR. The fit clip is part # Y62CR.
view full answer... - Recommended Parts to Add a Roof Rack to a 2024 BMW X5 w/ Flush Roof Rails Since your 2024 BMW X5 has the flush roof rails, I recommend the roof rack by Yakima which includes the following parts: Yakima SightLine FX Roof Rack for Flush Side Rails - Aero Crossbars - Black - Qty 2 item # Y73UV SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y62CR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.