Landing Pad 26 for Yakima SkyLine Towers - Qty 2
(11 reviews)
Price: $71.95
Need help with installation?
Locate installers near me- All Info
- Reviews (11)
- Q & A (0)
- Videos (1)
- Photos
Yakima Roof Rack - Y75ZR
- Fit Kits
- Yakima
- 2 Pack
Custom-fit Landing Pads attach to your Yakima classic or HD tracks. The pads create mounting points for Yakima SkyLine towers.
Features:
- Landing pads provide mounting points for Yakima SkyLine towers (sold separately)
- Pads install in your Yakima classic or HD tracks
- UV-resistant, rubber base pads protect your vehicle from scratches
- Snap-on covers protect landing pads when not in use
Specs:
- Quantity: 2 pads
- Limited lifetime warranty
8000256 Yakima Landing Pad 26
Installation Details
Video of Landing Pad 26 for Yakima SkyLine Towers - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Yakima Roof Rack - Fit Kits - Y75ZR
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the Landing Pad 26 for the Yakima SkyLine and Control Towers, this is for a quantity of two pads. Now, these landing pads will provide the mounting points for your Yakima SkyLine and Control towers, those towers we do sell separately on our website. Basically, these landing pads will install into the Yakima classic or HD tracks, and it holds your towers in place. It does include everything laid out here on the table, the two metal plates, the two bases, the two covers, the four bolts with the washers, four spacers, and a nice hex wrench for tightening them down. And these are pretty easy installation, all you have to do is take this metal plate, slide it into the Yakima classic or HD track, and then you attach the base to it.
Now, one thing I do wanna mention, they include these four plastic spacers, those would be used if you're gonna put these into classic tracks, they do require the spacers. If they're gonna go into the HD track, you just install it without the spacers. But again, you just put the landing pad over it like that, take your bolt and washer, line it up, same way with this side, and then once you get the holes lined up, use your hex wrench and just tighten them down into place. Align your landing pads along the track where they're needed, and then go ahead and tighten them down with the hex wrench. Now, you're able to attach your SkyLine or Control towers to these bases.
These bases are a nice UV resistant plastic base, which will protect your vehicle from any scratches, and what's nice about it, when your towers aren't attached to that, you can leave those on there, and then just take this cover, snap it over there, and that'll protect that landing pad from any damage or from anything dirt building up, and then when you're ready to attach your towers, just pop the cover off and attach your towers to that. Again, the specs for this, this is for a quantity of two pads. But that should do it for the review on the Landing Pad 26 for the Yakima SkyLine and Control Towers..
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Landing Pad 26 for Yakima SkyLine Towers - Qty 2 - Y75ZR
Average Customer Rating: 4.9 out of 5 stars (11 Customer Reviews)
Custom-fit Landing Pads attach to your Yakima classic or HD tracks. The pads create mounting points for Yakima SkyLine towers.by: Michael09/18/2022
eTrailer comes through again! These number # 26 Yakima landing pads are riding in t-slot rails of my RetraxPro XR tonneau bed cover. They are the landing pads for my Yakima SkyLine towers and Yakima Corebar cross-bars. I’ve attached pics. Glad I had a Park Tool ATD-1 Torque wrench with a 5mm hex bit to secure these pads at the recommended 4nm. I selected the # 26 landing pads instead of the # 1 pads so I have the option to upgrade to the Yakima HD bars later for a higher load capacity.
by: Jeremy03/12/2022
Extremely impressed with the buying experience form etrailer.com! Only place I could see actual pictures of the product I was buying. Most other sites just showed stock pics. Was able to get the exact product I needed which can be difficult with all the Yakima rack options. The Yakima product was as expected. Alway good quality.
by: Kevin11/23/2022
Great communication and follow through on my orders from etrailer. -confidence inspiring.
by: Ray 03/20/2024
by: 04/10/2022
by: Charles 05/22/2023
by: Mark 02/16/2023
by: Chad 06/21/2023
by: James 09/29/2023
by: Rolando 03/30/2023
by: Andrew 01/17/2022
11
11
See what our Experts say about this Yakima Roof Rack
- Yakima Landing Pad 1 vs. Landing Pad 26The difference between the Yakima Landing Pad 1 # Y00221 and Landing Pad 26 # Y75ZR are what they fit. The two come with different hardware and the Landing Pad 1 is mostly for some factory tracks as well as specific vehicles, while the Landing Pad 26 is for Yakima tracks. So the right one is really going to depend on what application you have.
view full answer... - How Can I Mount a Pioneer Platform to My RetraxPRO Hard Cover on My 2022 Ram 1500?I have an answer for you. Without knowing the exact bed size or whether you have RamBox installed on your 2022 Ram 1500, if you are looking to use a Retrax Pro model with the included rails like the RetraxPRO Hard Tonneau Cover # RTT-80245, I cannot guarantee that the Landing Pad 26 # Y75ZR fit into the dimensions of the tracks of the Retrax tonneau cover. Yakima unfortunately does not test their landing pads on other manufacturers' tracks, so there is no way to tell if the LockNLoad platform...
view full answer... - Is The Rhino-Rack Roof Rack For Yakima Tracks Compatible With Yakima HD Tracks Hi Ken, The slots are slightly different between the standard Yakima Tracks (42" # Y01126, 54" # Y01127, 60" # Y01135) and HD Tracks (54" # Y64MR, 60" # Y74MR, 72" # Y84MR) so the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT would not be compatible with the HD Tracks. If you haven't gotten the Tracks yet then you'll want to go with the standards options. If you already have Yakima HD tracks then you'll need the following components: Landing Pad 26 # Y75ZR (x2) SkyLine...
view full answer... - 2019 Ram 1500 Fitment for Yakima HD Tracks and Tonneau CoverAs long as you can fit the 2" wide Yakima 60" HD Tracks # Y74MR so you have no less than 1/8" overhanging the outside of your truck bed side (see attached) you're good to go. This then allows you to use 2 sets of the Landing Pad 26 # Y75ZR and SkyLine Towers # Y53TR for a base system. The 66" Round Crossbars # Y00410 might work but I'm not sure if you'll have the clearance for that since I'm not sure where the Yakima tracks will sit. If they truly can sit in the middle of your rails...
view full answer...
- Fit Kit for Installing Yakima Legs on Thule Tracks for 2022 Toyota TacomaThanks for reaching out! If you have the SkyLine Towers for Yakima Crossbars # Y53TR then all you need is 2 sets of the Landing Pad 26 # Y75ZR and you're set. If you have a different leg kit then you need the SkyLine towers to accomplish this as the other Yakima legs are for different installation types.
view full answer... - What Parts do I Need to Mount Yakima JetStream Crossbars to the Yakima 54" HD Tracks # Y64MR?Yes! If you have the Yakima JetStream Crossbars # Y00426 already, you can use the Yakima 54" HD Tracks for Roof Racks, OverHaul HD, and OutPost HD # Y64MR to use your crossbars. Here are the additional parts you need to make it happen: - x2 Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR - x4 Replacement SkyLine Tower for Yakima Crossbars - Qty 1 # 8880614 With these components, you will be able to use your JetStream crossbars on the tracks.
view full answer... - Parts Needed to Install Crossbars on the Yakima 72" HD Tracks for Roof RacksTo install crossbars on the Yakima 72" HD Tracks for Roof Racks # Y84MR you need 2 of the Landing Pad 26 # Y75ZR, the SkyLine Towers # Y53TR, and then your choice of Yakima crossbars. I recommend using the JetStream crossbars like the 50" # Y00425 because they look great, they are durable, and they are made of aluminum so they will last a long time. I like this system because you can adjust the crossbars along the rails to accommodate different accessories you might need on your truck.
view full answer... - What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
view full answer... - Parts Needed to Install Yakima HD Crossbar Roof Rack in Camper Shell TracksI have a solution for you but Thule Podium feet can't be used with any Yakima crossbars. What you would need to install Yakima HD bars in the tracks you have are the following: x2 Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR x4 Replacement SkyLine Tower for Yakima Crossbars - Qty 1 # 8880614 x1 Yakima HD Crossbars QTY 2 part # Y01158
view full answer... - Parts Needed to Add Yakima Rack to Diamondback SE Tonneau Cover on Ford Super DutyWe can get your Ford Super Duty set up with a Yakima rack for your Diamondback SE tonneau cover. The Q Towers are no longer made and aren't compatible with Yakima's latest racks, so you'll need a new set of towers for the system. Here is exactly what you'll need: - Yakima 72" HD Tracks for Diamondback Truck Covers # Y92AR - Yakima HD Crossbars - 78" Long # Y01159 - SkyLine Towers # Y53TR - HD Bar SL Adapter # Y03541 - Landing Pad 26 for Yakima SkyLine Towers # Y75ZR You'll need a...
view full answer... - Can the Yakima 60" HD Tracks for Roof Racks Be Used on a 2018 Chrysler Pacifica with a Naked RoofThe Yakima 60" HD Tracks for Roof Racks # Y74MR was designed to be used on truck bed rails or truck bed caps. It was not intended for use on the roof of a vehicle. That being said, it does not mean that you cannot do it. It simply means that there is no guide as to which vehicles it would be a good fitment for. I did take a look and did not see another roof rack option, so installing tracks would be a good option. But, you will need to measure your roof to ensure you have the space. The...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Installed by:
Jeff D
Edited by:
Daron K
Written by:
Alex H
Updated by:
Michael B
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.