To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.
Features:
Yakima 58" RoundBar MD:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2016 Honda CRV, we're going to be testing the Yakima round bar roof rack system, consisting of part numbers Y00409, these are the round 58 inch cross bars, part number Y00146, these are the baseline tower for the Yakima cross bars, and part number Y03536, which is the round bar SL adapter kit for the Yakima baseline towers, and part numbers Y06148 and Y06152, which are the base clip fit kits for the Honda CRV. The Yakima round bar roof rack system is great for carrying a wide variety of accessories on your roof while freeing up space inside your vehicle for you and your family. The two bars have a combined carrying capacity of 165 pounds although you always want to double check with your vehicle's manual to make sure your roof can withstand that weight. Both of the end caps do come with knock outs which you can replace with the Yakima same key system so you can actually utilize this with your Yakima accessories and make everything key alike. Now that we've gone over some of the features of the roof rack system, let's go ahead and show you how it installs. We have our rear bar partially assembled on our table here, and our next step is to install our base tower to the other end of our bar. So we'll take our baseline tower, take this plastic adapter piece, and that gets pushed on the top here till you hear a couple clicks. Then we'll take our round bar adapter, place that, line up with the screw, then we'll come around to the front of the baseline tower, pull this portion out so we can see the screw that we need to tighten down with our included tool.
Now as we tighten this down, we just want to loosely tighten it up, because we want to still be able to move it along our bar to get our spread between our towers accurate. Slide it on, and we'll put our end cap on here so it doesn't slide back off. And then we'll get our proper spread between our towers. You can find this measurement in your instructions. Once you have it where it needs to be, we'll tighten it down the rest of the way. Now the nice thing about this tool, once you tighten this down, you'll actually hear audible clicks to let you know that you've tightened it to its proper specification and this is also so you don't over tighten it as well. Another thing I'd like to take note, you see these three notches here and this knob here.
Now if we we're to loosen that up, if I was to move this, you can see that the foot moved a little bit. So with this particular vehicle, we want it set towards the back of the car, as you can see here. Next we'll take our foot pad here from our fit kit and we'll push that into place as well. At this point, you can also put your clamps into place, but I like to wait for that after I set this on the vehicle and get the spacing set up so I don't possibly scratch up or damage the vehicle with the clamps still in place. We'll set our bars into place. First we're going to make sure that they're even on both sides, but then we're going to measure from center of the bar to center of the bar for our crossbar spread and this measurement you will find in your instructions.
Now we'll open up our doors, insert our clamps, and start to tighten them down. So we'll take our clamps, you can see this open portion here, that'll hold in like so and you can see this kind of hovering above our door edge here. To lower that down, we'll go to this screw, tighten it down, that'll lower it into place. Then we'll come to the center here. And right now, we'll just snug it up against the door and we'll repeat this process for our driver side.
You can close that up now and our final step is to add our end caps, which you can see these two portions here, these two hooks go into these two areas on our end cap. We'll put those into place, and then we'll load up our gear and hit the road. And there you have it for the Yakima round bar roof rack system on our 2016 Honda CRV.
Average Customer Rating: 4.8 out of 5 stars (229 Customer Reviews)
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.Free delivery that showed up in 3 days!!! Can't beat it. The crossbars with the Control Towers and LandingPad 9 fit perfectly on my Honda Element. Had them installed in about 30 mins. Don't have my cargo box yet and wanted to test strength, so I had my 110lb wife standing on them with no issues (yes, the car was parked). Plan to take a long camping trip next week with a cargo box on top...wife will be in the vehicle:-)
Works perfectly. I am always impressed that Yakima continues to make parts for the "old roundbars" since they have since moved on to the superior JetStream bars.
Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
Kimberly has shown that great customer service is not dead! etrailer and Kimberly are great to work with and have earned my business and will always be the 1st and last place I look for my rack+ needs!
As for the application, I needed more space to fit my cargo box on top of my 4Runner TRD Pro’s rack. I came up this this… Thank you!
A great company to do business with, and lots of merchandise in stock. I orderd a roof rack for my truck on Tuesday morning and it was on the porch when I returned from work on Thursday. I will deffinitely order more from etrailer.com
Excellent selection of rack parts. Very useful installation videos help when choosing between products. Easy ordering process. Quick delivery.
One quick phone call and Gwendolyn figured out exactly what I needed for our new car to use my old Yakima rack.
necessary for using the widest cross bar option (78"). East to install
You guys provide great products and excellent customer service.
Thanks
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
Great first experience dealing with you guys! Shipped fast, and was a faster install. You gave me the right parts and it went together in a flash.
Will definitely be doing business with you all again.
I have been using Yakima racks for around 40 years and have never had any problems. However, I am amazed at the price increases over the years. Etrailer prices were by far lower than most. Overall, a very excellent purchase.
The rack has been so useful since I purchased it. Staff at etrailer.com were exceptionally helpful in getting the best option for my car and answering questions. I recommend this company, for its 110% customer service, excellent prices and timely delivery.
Haven’t used them yet but they should work as expected
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
Great company. Fast delivery.
Kit worked perfectly on my 2021 Subaru Forester. The whole install took 30 minutes. Never been disappointed with etrailer.
Great service - great price
Great service - great price
Yakima Crossbars were as you would expect - steel bars coated in a soft black coating (be mindful when you are utilizing these with the top mounts as the clamp will eat through the soft coating when you tighten them down). I had issues with my yakima round bar setup as the brackets and tower system were allowing water to leak in. This is in no way reflective of what youll experience but Yakima has superb support. I spoke with them twice on my issue and out of their kindness they shipped me an entire setup to replace my existing one for free.
Product works as advertised thus far. When you buy the yakima towers, you are required to purchase these as well to fit the rounder bars (I feel sure there are other adapters for other bar shapes). These should have come with the towers in my opinion, and I resented having to shell out more $$ to purchase these "must have" adapters to mount my bars. 3 star overall rating based on function, price. Delivery and packaging was top-notch through etrailer.
I ordered a Yakima Roof Rack for my Toyota Prius from eTrailer.com. Part of the reason for purchasing from eTrailer.com was the promise that the racks were made specifically for the car and would not dent the roof.
I received the rack on July 31, and installed the racks on my Prius according to instructions included with the racks. Our tandem kayak is 65 lbs . The towers were placed on the outer most part of the roof as indicated by the instructions. Yakima saddles were attached to the crossbars to hold the kayak. Nothing was close or touching the top of the roof. We transported the kayak to a nearby lake, 6 miles, and back. The next day we removed the racks from the roof and noticed 4 dents on the top of the roof. It was obvious that transporting the kayak on the rack caused the dents.
We had to pay $100 to have the dents removed from the Prius roof.
I cannot continue to use this rack that puts dents in the car's roof. I was extremely disappointed in the racks. In reading the Toyota manual and contacting them by phone, there is no mention of using or not using roof racks.
I was shocked to learn from Rachel at eTrailer.com that your company takes absolutely no responsibility for this Yakima product they sell. The best they can do is to pass the buck and refer us to Yakima.
Very disappointed, and out a lot of money for a product that damages your car. Will not recommend or buy here again. eTrailer.com does not even deserve one star in this review.
Typical Yakima cross bars. Coating is a little too easy to cut or gouge, but probably needs to be that way to get the grip it provides. Good enough solution for me, and allows me to continue to use all the attachments I've accumulated over the years that require a round bar
The Yakima roof rack system is an Outstanding product. I purchased the product to replace the OEM roof rack because it was too flimsy to carry the tandem bike mount and my bike. The Yakima roof rack is solid and provides me the peace of mind while hauling my bike on the roof of my car. etrailer provided the product for the best price as always.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.