bing tracking image
  1. Roof Rack
  2. Yakima
  3. Aero Bars
  4. Crossbars
  5. 44 Inch Bar Space
  6. Black
Custom Fit Roof Rack Kit With Y06127 | Y06154 | Y63TR

Custom Fit Roof Rack Kit With Y06127 | Y06154 | Y63TR

Item # Y42VD
Our Price: $733.80
Roof Rack

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof. Great Prices for the best roof rack from Yakima. Custom Fit Roof Rack Kit With Y06127 | Y06154 | Y63TR part number Y42VD can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (31)
  • Q & A (0)
  • Videos (11)
  • Photos

Yakima Roof Rack - Y42VD

  • Aero Bars
  • Crossbars
  • 44 Inch Bar Space
  • Yakima
  • Black
  • Flush
  • 2 Bars

This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.


Features:

Yakima BaseLine FX LG:
  • Integrated crossbar and tower system lets you carry cargo and accessories on your vehicle's naked roof
  • Flush design provides a streamlined, factory look - no crossbar overhang
  • JetStream crossbars with top channels accommodate channel-mount and clamp-on accessories
  • Push-down rubber strips in top channels allow for easy attachment of channel-mount accessories
  • Sleek towers with matte finish are weather resistant
  • Custom installation to your vehicle's naked roof with Yakima BaseClips
  • Aerodynamic, lightweight aluminum crossbars resist corrosion and reduce wind noise
  • Yakima Same Key System (SKS) lock cores (sold separately) deter theft

Yakima BaseClip 127:
  • Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
  • Padded, stainless steel clips provide secure grip on your door jambs
    • Snap onto DropHooks inside towers
    • Protect door jambs from scratches and abrasions
    • Powder coated for durability and rust resistance
  • Molded rubber pads fit the contours of your roof
    • Clip onto bottoms of towers
    • Protect roof from scratches and abrasions

Yakima BaseClip 154:
  • Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
  • Padded, stainless steel clips provide secure grip on your door jambs
    • Snap onto DropHooks inside towers
    • Protect door jambs from scratches and abrasions
    • Powder coated for durability and rust resistance
  • Molded rubber pads fit the contours of your roof
    • Clip onto bottoms of towers
    • Protect roof from scratches and abrasions


8006127 Custom Base Clips and Pads for Yakima Base Line Towers

8006154 Custom Base Clips and Pads for Yakima Base Line Towers

8000167 Yakima Base Line FX LG - Roof Rack Cross Bar for Naked Roofs





Video of Custom Fit Roof Rack Kit With Y06127 | Y06154 | Y63TR

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Yakima BaseLine Roof Rack Towers BaseClip Fit Kit Review

Hi, everyone, Aidan here with etrailer. Today, we're gonna be taking a look at the Yakima BaseClip Fit Kit for your Yakima BaseLine FX Roof Rack Kits. Now, this is gonna be the rubber pad and the clamps that actually hold the whole roof rack system in place and make it a custom fit for your various different vehicles. Now, that being said, there's tons of different kits out there on our website for different vehicles, all of those pads are gonna be molded somewhat differently to adapt to different roof shapes, so do plug in your vehicle information into our fit guide and find the right fit kit for you and your vehicle, but it's gonna be a look at the overall system, how it works, and how it functions with the roof rack. So the main two parts of this are gonna be the rubber pad and the clamp, but let's talk about that rubber pad first. It's gonna be custom molded to your vehicle, so you can see really well right here on this lip, it forms around that ridge on the roof and fits snugly into place there to make sure that nothing is moving around and it's fit custom to that area.

Now, the base of that fit kit is what actually clips into the tower here and serves as the connection point between the crossbar roof rack system and your vehicle. That rubber base to it is going to give you the maximum protection and make sure that you're not scratching or scuffing any paint on your roof, and it keeps things nice and sealed up. Now, the stainless steel clip is what also helps to secure it to our roof, that's gonna be the second main component. It's a stainless steel construction and a black powder coat finish, the finish helps it match the whole roof rack system, but it all helps it resists rust and corrosion. Now, the inside of those clips are gonna have a rubber padding, again, so there's no metal on metal contact with our paint or anything, and then you can see here, it's custom fit, hooking inside our door jam, and whenever I close the door, it'll just fit right around there, making sure that it's a nice custom fit.

It attaches up inside the tower right up through here, and it just tightens down, hooking into a slotted opening hole, and then that's what gets it all secured and what helps it join into the tower system. These fit kits come in pairs, one for the passenger's side and one for the driver's side. Now, the reason they do that is because depending on your vehicle, you're probably gonna have a different fit kit for the front and rear. Yakima does a lot of research and development into making sure it's a custom fit for the vehicle, and the one we have it on here today, the Honda Civic, is a perfect example. You can even visually see how much longer the clamp at the back is compared to this clamp up at the front.

So clearly, we're gonna need a different kit for the front end, because there's just less distance for that clamp to travel. So again, plug in your vehicle information to our fit guide, make sure you find the right kits for you, and make sure that you also have the right set for the front and rear. But that's really all there is to it. The BaseClip system is gonna work really well in tandem with that BaseLine roof rack system, and it's really just coming down to making sure you get the right fit for your vehicle, because without that fit kit, you don't have a roof rack. But that'll do it for our look at these BaseClip Fit Kits for your Yakima BaseLine Roof Rack Systems.

Thanks for watching.


Customer Reviews

Custom Fit Roof Rack Kit With Y06127 | Y06154 | Y63TR - Y42VD

Average Customer Rating:  4.9 out of 5 stars   (31 Customer Reviews)

This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.

by:
Mazda

Solid build quality and easy installation on my '21 Mazda CX-5.



by:

Standard Yakima Equipmemt. Availability is sketchy but etrailer.com had it in stock!



by:
Hyundai Sonata

Hyundai Sonata - glass pano roof. These items have been on for about 1-year. So happy with the set up. I’ve take a road bike and a mountain bike on 500+ mile trips. The mounts do an excellent job.



by:

I choose etrailer simply because they mailed to APO. I’m a AD SM, and a lot of companies don’t shop to APO. As soon as I ordered my product, I received an email as a courtesy from etrailer letting me know I had an individual that would be tracking my product every step of the way, reassuring a smooth process. Their site functionality was easy, their customer service was great. I wanted to know if they had bike racks that would fit my cross bars, I got a email right away with a suggestion and a link that would fit my needs. I’ll definitely order from etrailer if I ever need to again.



by:
2019 Hyundai Santa Fe

I waited several weeks for roof rack to arrive after ordering online. I am accustomed to Thule racks, but could not find any towers/bases to fit the 2019 Santa Fe. Once here, the Yakima rack mounted with ease and I look forward to hauling kayaks or basket on the roof.
Thank you etrailer.



by:
Mazda

The roof rack came packaged nicely and the instructions were simple to follow. I installed it in about an hour and we have already used it this past Memorial Day weekend. My wife loves the way it looks on her Mazda. Much better than the factory rack



by:

Good product. A little tricky to set up but everyone can do it



by:

Great customer service, definitely order from etrailer again.



by:



by:

the product is excellent. very good quality material. the measurement given for my 2016 wrx are not exactly what they should be.



by:



by:

Great product. Easy to build.



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
506
Show More Reviews

See what our Experts say about this Yakima Roof Rack

  • 2023 GMC Acadia Roof Rack and Cargo Box Recommendations
    The absolute best roof rack for your 2023 GMC Acadia with the bare roof is the Yakima BaseLine FX because it has a nice factory look but is also more robust so you get a great looking system that's also stronger. Here are the parts you'll need: - BaseLine FX Crossbars # Y59UV - Fit Kits # Y06138 and # Y06132 - Lock Core Kit # Y07204 (optional) If you were planning on using this for a cargo box then I highly recommend the Yakima SkyBox NX 18 # Y45AV. I really like this box because it...
    view full answer...
  • Can the Yakima BaseLine Crossbars Handle the Weight Capacity of a Roof Top Tent
    The weight capacities listed on cross bars like the Yakima BaseLine FX Roof Rack for Naked Roofs # Y59UV are the dynamic capacity, meaning while the vehicle is in motion. When you're parked and using your tent, the weight capacity is easily going to double or triple because the weight will be static over the axles. So with that being said, the BaseLine crossbars will easily be able to handle the weight of the two adults and the roof top tent. It's also worth mentioning that most, if...
    view full answer...
  • Recommended Roof Rack for a 2024 Volvo S90 w/ No Rails
    To add a roof rack to your 2024 Volvo S90, that does not overhang the side of your roof, you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y59UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
    view full answer...
  • Recommended Roof Rack and Kayak Carrier for a 2003 Toyota RAV4
    Lucky for you, Yakima does make a set of crossbars that are designed to work with vehicle's that have a bare roof like your RAV4. Check out the Yakima BaseLine FX Roof Rack for Naked Roofs # Y59UV with the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185. These crossbars measure 44 3/4" long, has a 165 lb dynamic weight capacity, and has an integrated top channel for roof mounted accessories. Since you also are looking for a way to transport some kayaks, I'd recommend checking...
    view full answer...
  • Length/Width of Yakima BaseLine FX Roof Rack Crossbars For 2019 Hyundai Santa Fe w/ Bare Roof
    Hi John; great choice going with the Yakima roof rack for your 2019 Hyundai Santa Fe with a bare roof, and the crossbars themselves are 2-3/4" wide x 1-1/8" tall for the Yakima BaseLine FX Roof Rack # Y59UV. That should allow you to clamp any accessory on them as they are standard size crossbars. To complete the set up for your' 19 Santa Fe you'll also need the BaseClip Fit Kit # Y06151 and # Y06154.
    view full answer...
  • Parts for Yakima JetStream Roof Rack on 2017 Land Rover Discovery Sport and How Many Bikes Will Fit
    To install the 50" Yakima JetStream crossbars # Y00425 on your 2017 Land Rover Discovery Sport you'll also need the BaseLine Towers # Y28TR as well as fit kits # Y06127 and # Y06154. When it comes to bike capacity there are a few factors that come into play, but if your bikes are lightweight then you can potentially fit 5 or 6 bikes on 50" crossbars. The factors that you need to take note of are the weight of your bikes, the width of the bike racks you plan on using, and the geometry of...
    view full answer...
  • Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
    While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
    view full answer...
  • Yakima Roof Bike Rack Recommendation for 16 Kids Bike Wheels on a 2018 Subaru WRX Sedan
    As far as Yakima racks that work with 16" and 20" wheels, the best and only option is the fork-mounted Yakima HighSpeed # Y02115. With this rack, I confirmed with Yakima that it does not require a minimum or maximum wheel diameter as long as the bike's tires do not exceed 5" wide and the bike's wheelbase does not exceed 48". As far as compatibility with the kid's bike, it is compatible with 9 mm x 100 mm, 12 mm x 100 mm, 15 mm x 100 mm, 15 mm x 110 mm, 15 mm x 135 mm, 15 mm x 142 mm, 15...
    view full answer...
  • Roof Rack and Kayak Carrier for 2014 Chevy Cruze
    The SportRack light-duty roof rack # SR1010 is a confirmed fit on your 2014 Chevy Cruze and it will be compatible with almost any roof-rack-mount kayak carrier since it uses square bars. But do please note that this rack has the lowest weight rating of all racks made for your car (90-lbs), so while it is a nice value it may not be the best choice for transporting a kayak. If, for instance, you are planning to take just one 40 or 50-lb kayak only a short distance on local roads, not on...
    view full answer...
  • Roof Rack Fit on 2014 Hyundai Veloster
    I checked with the roof rack manufacturers and was able to find a roof rack that is a confirmed fit for your 2014 Hyundai Veloster, which is from Yakima and consists of the following parts: - Yakima JetStream Crossbars Black # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06180 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06127 This roof rack has aerodynamic bars which are low profile, giving the rack a...
    view full answer...
  • Will the Yakima Sidewinder Bike Rack Fit on Elliptical Style Crossbars on a 2013 Nissan Altima
    The Rhino-Rack Roof Rack with the Vortex Aero Crossbars, # RRVA126B-2, 2500 Series Leg Kit, # RRRLKVA, and the Custom DK Clamps and Pads, # DK381, will fit a 2013 Nissan Altima, however the Yakima Sidewinder Tandem Bike Rack is only compatible with round crossbars. According to my contact at Yakima, Yakima does not offer an adapter that will allow the Sidewinder bike rack to be used with elliptical style crossbars because the weight of the bike rack and a tandem bike would be too great...
    view full answer...
  • Recommended Roof Rack For 2015 Nissan Altima With A Sunroof
    We do have a roof rack that's designed to fit your 2015 Altima and also work with your sunroof. I recommend the Yakima Jetstream roof rack. This rack is extremely quiet because it uses aerodynamic crossbars. The crossbars are 50 inches long and constructed of lightweight aluminum and have a black powder-coat finish. It is recommended not to open the sunroof when the roof rack is installed due to interference. To order this roof rack you will need part # Y00425, part # Y28TR, part #...
    view full answer...
    Image 1 for Image 2 for
  • Yakima Roof Rack Recommendation for 2013 Nissan Altima Sedan
    Yakima does have a round bar roof rack for your 2013 Nissan Altima Sedan. It uses the part numbers # Y00408, # Y28TR, # Y03536, # Y06137, and # Y06127. Since you have bars already you would not need the part # Y00408. Since most likely what you have is the older Q-Tower style rack the bars would be the only thing that you could reuse. This rack uses the BaseLine style of feet which is their current style. Your Sunroof would not be an issue at all.
    view full answer...
  • What Kayak Carrier do You Recommend for My 85-Pound Kayak on My 2016 Hyundai Sonata?
    I have a great solution for you. While the Thule Hullavator # TH898 can be used with a crossbar system that uses clips on your 2016 Hyundai Sonata without a panoramic roof, it has a weight capacity of 75 pounds. Unfortunately, this is not enough weight capacity for our 85-pound kayak. We also do not carry a load-assist option that has enough weight capacity for your kayak. In addition, With that being said, the best option is to use the Yakima BigCatch Kayak Carrier w/ Tie-Downs - Saddle...
    view full answer...
  • Roof Rack and Cargo Carrier Options for 2013 Nissan Altima 4-Door Sedan with Moon Roof
    We offer many roof rack options for your 2013 Nissan Altima 4-Door Sedan with moon roof; and we also offer a range of rooftop cargo products, some of which can be mounted to a roof rack and others which require only roof side rails. Since your Altima has a moon roof it is indeed a good idea to install a roof rack to support the cargo carrier, but if your cargo needs do not require a high weight capacity, and if your Altima owner's manual does not prohibit fabric bags like the Yakima being...
    view full answer...
  • Roof Rack Fit for 2015 Hyundai Sonata with Glass Panoramic Sunroof
    The roof rack I recommend for you is the Yakima Roof Rack with JetStream Crossbars # Y00426, BaseLine Towers # Y28TR, BaseClip Fit Kit # Y06137, and BaseClip Fit Kit # Y06127. I confirmed with my contact at Yakima that they do not have any fit restrictions for the glass panoramic sunroof on your 2015 Hyundai Sonata and so this roof rack will work well for you. I have attached a photo showing where this rack mounts on the Sonata.
    view full answer...
    Image 1 for
  • Roof Rack Recommended for 2013 BMW X3 With Bare Roof
    Most X3 models were equipped with the roof rails, so I initially thought you might be out of luck, but after searching around I found that Yakima offers a JetStream roof rack that would work perfectly on the bare roof of your 2013 BMW X3. To assemble the rack, you'll need the following parts: • 50 Inch JetStream crossbars in black as # Y00425 • BaseLine Tower Feet, part # Y28TR • Front Fit Clip # Y06123 • Rear Fit Clip # Y06127
    view full answer...
  • Carrying Bikes on a 2017 Hyundai Sonata Hybrid Limited
    The best bike rack is the one that's best for you. A lot of which is determined by how many and what kind of bikes you're going to be carrying. As well as how often you're going to be hauling the bikes. Overall, in my opinion, a hitch mount bike rack is the best way to go; however if you need to carry more than two bikes it isn't going to work for you because the only hitches that are designed for your 2018 Hyundai Sonata Hybrid are Class I receivers which are only able to carry up to...
    view full answer...
  • Roof Rack Recommendation for 2018 Nissan Altima with Sunroof
    For your 2018 Nissan Altima with a sunroof the Yakima roof rack part numbers # Y00421, # Y28TR, # Y06137, and # Y06127 is a confirmed fit and would work great. The only tech tip that Yakima states is that when open, the sunroof may interfere with some accessories. The aero shape of these crossbars will give you a very quiet ride and minimize fuel mileage loss.
    view full answer...
  • Recommendations For Carrying 4 Bikes On 2012 Hyundai Veloster
    With a Class l hitch on your 2012 Hyundai Veloster, you are limited with the tongue weight capacity and any bike carrier you install in the hitch limits you to 2 bikes. You will want to check your owner's manual or with your dealership to make certain you do not exceed the vehicle's tongue weight capacity. The Saris Freedom 4 Bike Platform Rack, part # SA4414B, is rated to be used with higher rated hitches and would not be a fit for your Veloster. You will want to make sure any accessory...
    view full answer...
  • Roof Rack And Cargo Carrier Recommendation For 2014 Nissan Altima 4-Door
    The Yakima Roof Rack System Is a good fit for your 2014 Nissan Altima 4 door. The weight capacity for the roof rack is 100 lbs. That would include the weight of any cargo box you choose added to the weight of any cargo you place in the carrier. The front crossbar is placed 15-1/8 inches from the windshield. The crossbar spread is 24 inches. You need the following parts for the roof rack: 48 inch RoundBars # Y00408 BaseLine Towers # Y28TR RoundBar Adapter # Y03536 BaseClips # Y06137 and...
    view full answer...
  • Roof Rack with Yakima SweetRoll Kayak Saddles on 2016 Nissan Altima
    The Yakima SweetRoll Kayak Carrier # Y04074 will fit onto the SportRack Roof Rack # SR1010. The SportRack will fit on your 2016 Nissan Altima however it's a semi-custom fit so it's not designed specifically to fit the roof of your car. For a custom fit I suggest the Yakima Roof Rack: 48 inch Round CrossBars # Y00408 BaseLine Towers # Y28TR RoundBar Adapter # Y03536 BaseClip Fit Kits # Y06137 and # Y06127
    view full answer...
  • Parts Needed to Install Yakima Jetstream Roof Rack on 2016 Hyundai Veloster
    Yakima would be the final authority on the correct components to install one of their roof racks on your 2016 Hyundai Veloster. I checked with them just now and the correct Base Clips would be the part # Y06127 and # Y06180. The other components you'd need would be the Yakima JetStream crossbars part # Y00425 and Baseline Towers part # Y28TR.
    view full answer...
  • Recommended Roof Rack For My 2015 Chevrolet Cruze
    I do have a roof rack that will fit your 2015 Chevrolet Cruze, but your Malone roof rack will not fit your vehicle. My roof rack recommendation will consist of the following: Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2, part # Y00421 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06137 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06127 Yakima Same Key...
    view full answer...
  • Roof Rack and Bike Carrier for 2012 Hyundai Veloster with Center Exhaust
    Since the 2012 Hyundai Veloster has center exhaust I do not recommend using a hitch mounted bike rack. The heat from the exhaust could damage the bike rack and bikes. The best option for carrying bikes on your Veloster is to use a roof rack. The roof rack that fits your vehicle is the Yakima system consisting of: Jetstream bars 50 inch # Y00425 Baseline Towers # Y28TR BaseClip 180 # Y06180 Baseclip 127 # Y06127 You could carry 2 bikes easily. Three bikes would require the center bike...
    view full answer...
  • Parts Needed to Install Yakima Round Bar Roof Rack on 2015 Nissan Altima
    We have parts to fit your Yakima round bars on your 2015 Nissan Altima, but not with the Q Towers as they were discontinued. According to Yakima you'll need the bars that you have already like part # Y00408. BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06137 BaseClip Fit Kit # Y06127
    view full answer...
  • Installation of Yakima Roof Rack on 2013 Nissan Altima
    Installing the Yakima JetStream roof rack on your 2013 4-door Nissan Altima does not require the weather to be a certain temperature and there should be no interference with your door putting the rack on. The accompanying photo shows how the clamps will look when installed properly and your door should shut completely. This rack is made up of: - Yakima JetStream Crossbars # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers #...
    view full answer...
    Image 1 for
  • Basic Roof Rack for a 2014 Nissan Altima
    I have some potential solutions for you, however, there is not a Thule roof rack fit available for your vehicle. For basic racks that are similar to Thule, I recommend Yakima's Round Bar or JetStream kits. The base kit for your vehicle is made up of parts that will work with whatever bar style you choose. It is made up of: BaseLine Towers for Yakima Crossbars, part # Y28TR BaseClip Fit Kit for 2014 Nissan Altima, Front, part # Y06137 BaseClip Fit Kit for 2014 Nissan Altima, Rear,...
    view full answer...
  • Recommended Yakima Roof Rack That Will Fit 2012 Infiniti G37 And 2016 Nissan Altima
    To install a Yakima roof rack on your 2012 Infiniti G37 and your 2016 Nissan Altima, you will be able to use the same crossbars and towers. The only different parts you will need will be the fit kits for each vehicle. I recommend purchasing the roof rack for the 2016 Altima. You would need part # Y00425, part # Y28TR, part # Y06137, and part # Y06127. Then for the Infiniti you will only need to get part # Y06109. You can use the crossbars and towers from the Altima kit mentioned above.
    view full answer...
  • Roof Rack Confirmed to Fit a 2022 Toyota Corolla Sport With Bare Roof
    We do have a roof rack system using a fit kit that fits your 2022 Toyota Corolla Cross with bare roof. 2022 Toyota Corolla Cross Roof Rack by Yakima - Yakima JetStream Crossbars # Y00428 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06154 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06153 I am not entirely sure what you mean by hand grips on the top of the doors. But this roof rack system will fit all models of...
    view full answer...
  • Recommended Roof Rack For A 2018 Mazda CX-5
    You will not remove the plastic strips on your 2018 Mazda CX-5 when you install a roof rack that is compatible with your vehicle. Aesthetics aside, none of the roof racks I have installed on the naked roofs of my personal vehicles have ever leaked. I do like the Inno option: Inno Aero Crossbars - Aluminum - Black - 42" Long and 45" Long - Qty 2, part # INXB108-115 Inno Flush Feet for Aero Crossbars - Naked Roofs - Qty 4, part # INXS200 Custom Fit Kit for Inno XS200, XS250, and INSUT Roof...
    view full answer...
  • Parts for Yakima JetStream Roof Rack on 2017 Land Rover Discovery Sport and How Many Bikes Will Fit
    To install the 50" Yakima JetStream crossbars # Y00425 on your 2017 Land Rover Discovery Sport you'll also need the BaseLine Towers # Y28TR as well as fit kits # Y06127 and # Y06154. When it comes to bike capacity there are a few factors that come into play, but if your bikes are lightweight then you can potentially fit 5 or 6 bikes on 50" crossbars. The factors that you need to take note of are the weight of your bikes, the width of the bike racks you plan on using, and the geometry of...
    view full answer...
  • Roof Rack Recommendation for a 2019 Hyundai Santa Fe
    Yes! We definitely have a great roof rack available for your 2019 Hyundai Santa Fe. The parts you need depend on if your vehicle has flush factory rails or a naked roof. If you have flush factory rails, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 - RCL Legs # RRRCL4 - Custom RCP Fit Kit # RR66QJ If you have a bare roof, I recommend the following: - Yakima JetStream Crossbars # Y00425 - BaseLine Towers # Y28TR - BaseClip Fit Kit - Qty. 2 # Y06151 -...
    view full answer...
  • Roof Rack & Roof-Mount Bike Carriers for 2004 Honda Pilot
    There is no single carrier that will both handle the weight of your 450-lb Honda scooter and also allow you to carry two standard bicycles, and at the same time remain within the capacity of the hitch on your 2004 Honda Pilot. The hitches made for your Pilot, shown on the linked page, have only a 350-lb tongue weight (TW) capacity. By the time you add the weight of a typical scooter carrier to your scooter's 450-lb weight you are way over the hitch and vehicle TW limit. Transporting your...
    view full answer...
  • Recommended Roof Rack for a 2023 Mazda CX-5 to Use the Thule Hullavator Pro Kayak Carrier
    In order to use the Thule Hullavator Pro # TH898 on your 2023 Mazda CX-5 you will need to have a roof rack with crossbars that extend 4"-8" past the roof rack feet. If you have a roof that has no existing crossbars or rails, I recommend the 2023 Mazda CX-5 Roof Rack by Yakima which consist of the: - Yakima HD Crossbars # Y01156 - BaseLine Towers for Yakima Crossbars # Y28TR - HD Bar SL Adapter # Y03541 - BaseClip Fit Kit # Y06130 - BaseClip Fit Kit # Y06154 If you have flush mounted...
    view full answer...
  • Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
    Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
    view full answer...
    Image 1 for
  • Are Two Different BaseClip's Needed for a Yakima Roof Rack on a 2023 Maxda CX-5 with Naked Roof
    Yes, the two different BaseClip's are correct for your 2023 Mazda CX-5 with naked roof. The BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 is for the front bar and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06154 are for the rear bar. The rest of the roof rack kit is the: - Yakima HD Crossbars # Y01156 - BaseLine Towers for Yakima Crossbars # Y28TR - HD Bar SL Adapter for Yakima BaseLine # Y03541 This will allow you to use the Thule Hullavator Pro Kayak...
    view full answer...
  • Recommended Roof Rack for a 2023 Hyundai Santa Fe w/ No Roof Rails
    To add a roof rack to your 2023 Hyundai Santa Fe with no rails, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06151 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06154 This roof rack has a 165 lbs capacity. I have attached...
    view full answer...
    Image 1 for Image 2 for
  • Correct Yakima Fit Kit for 2019 Mazda CX-5 with Naked Roof
    The correct Yakima fit kit for a 2019 Mazda CX-5 with naked roof is the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y06130 for the front and part # Y06154 for the rear.
    view full answer...
  • What Parts Are Needed to Install Yakima Jetstream Roof Rack on 2020 Hyundai Santa Fe
    To install a set of Yakima Jetstream crossbars like the part # Y00425 on your 2020 Hyundai Santa Fe will require you to use Yakima Baseline towers part # Y28TR, and the baseclips part number # Y06151 and # Y06154. The Jetstream bars are not compatible with Rhino Rack feet or with Rhino Rack fit kits.
    view full answer...
  • Will the Thule Motion XT Cargo Box Fit on a 2021 Hyundai Santa Fe?
    Yes, the Thule Motion XT Rooftop Cargo Box # TH629706 will fit your 2021 Hyundai Sante Fe with a crossbar system. The Motion X will fit on top of your vehicle and allow you to access the rear hatch. If you need a roof rack, the parts you need depend on if you have factory flush rails or a naked roof on your vehicle. If you do not already have a roof rack, you will need to purchase one. If your vehicle has flush factory rails, I recommend the following parts: - Rhino-Rack Vortex Aero...
    view full answer...
  • Roof Rack for 2020 Hyundai Santa Fe With Naked Roof
    Yes, since you have a naked roof on your 2020 Hyundai Santa Fe that is the information needed to get the right roof rack. That said, there is just one brand that makes a roof rack for your '20 Santa Fe that has a naked roof, which is Yakima. The parts for your Santa Fe will essentially be the same with the exception of the crossbar type, as you can choose from either round crossbars or aero crossbars. I definitely recommend going with the aero-shaped bars as they are going to be much quieter...
    view full answer...
  • Can Yakima SkyRise Tent be Used with 2018 Mazda CX-5 AWD
    The Yakima SkyRise Tent # Y07436 will work great on your 2018 Mazda CX-5 but you will need a roof rack with at least a 165 lb capacity. If the roof of your 2018 Mazda CX-5 has flush rails that run front to back you'd want the Yakima Jet Stream rack part numbers # Y00425, and # Y64AR, # Y39AR If you have a naked roof you'd want the part numbers # Y00425, # Y28TR, # Y06130, and # Y06154. If you have rails that run front to back that are raised up you'd want the Malone rack part # MPG215....
    view full answer...
  • Fit Thule Sidekick Roof Mounted Cargo Box On 2005 Honda Pilot
    If your 2005 Honda Pilot has a factory roof rack with cross bars that run side to side, then the Thule Sidekick Cargo Box, # TH78GC, will fit. If you just have side rails that run front to back and no cross bars, you will first need to add Thule Custom Fit Roof Rack, which consists of these parts, # TH710401 and # TH712400. This will add cross bars and you can then use the cargo box. I have included a link to the installation details. If you do not have side rails or cross bars (a naked...
    view full answer...
  • Roof Rack With Wide Crossbars for 2019 Mazda CX-5 With Naked Roof
    We do have a great solution for a roof rack with wide crossbars on your 2019 Mazda CX-5 with a naked roof, but due to the way the Rhino-Rack bars mount, we cannot confirm you can use bars wider than the recommended 46 inches. Instead, the best option is to use a roof rack from Yakima, which uses 50 inch crossbars and fits your '19 CX-5. The rack is made up of the following parts: - Yakima JetStream Crossbars # Y00425 (Black) - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit...
    view full answer...
  • Is Fit Kit Available for Old Thule 400XT Feet on 2004 Honda Pilot
    Thule actually didn't start making the Thule Aero roof rack with feet # TH400XT until 2006. When I spoke with my contact at Thule she said that the discontinued fit kit 2163 is what was used for a 2006-2010 Honda Pilot. Since the first generation Honda Pilot was from 2003-2008 this kit may work for your application but Thule never test fit this and you'll probably have a really hard time finding this kit as the roof rack was discontinued back in about 2012. If you can't find that fit kit...
    view full answer...
  • Will Thule Hullavator Fit with OEM Roof Rack on 2020 Hyundai Santa Fe
    Since your OEM crossbars don't extend past the feet of your roof rack you will need to use an aftermarket roof rack system to use the Thule Hullavator Pro # TH898 on your 2020 Hyundai Santa Fe. For this application I like to recommend the Yakima JetStream roof rack system because you can install longer crossbars to ensure that there is enough room for the Hullavator. You will need the BaseLine Towers # Y28TR, BaseClip Fit Kits # Y06151 and # Y06154, as well as JetStream Crossbars. I recommend...
    view full answer...
  • Correct BaseLine Towers and BaseClip Fit Kits for Yakima Crossbars on 2020 Acura RDX
    Absolutely! For just the Yakima BaseLine Towers for your 2020 Acura RDX you use part # Y28TR. Then for the Front BaseClip Fit Kit you will need part # Y06174 and for the rear you will use part # Y06154. For adding theft deterrence measures, I strongly recommend using the Yakima Same-Key Locks # Y07204. Pricing information will be listed on the product pages. These will work great with your existing Yakima JetStream or CoreBar Crossbars to provide you with a complete roof rack for your...
    view full answer...
  • Recommended Roof Rack for Naked Roof of 2019 Hyundai Santa Fe
    For your 2019 Hyundai Santa Fe with a naked roof, the roof rack I recommend is the Yakima rack consisting of: Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 BaseLine Towers # Y28TR BaseClip Fit Kit # Y06151 and # Y06154 I also recommend using the locks # Y07204.
    view full answer...
  • Roof Rack Recommendation for 2017 Mazda CX-5 GT
    For your 2017 Mazda CX-5 with a naked roof we have roof racks that fit like the Yakima part numbers # Y00408, # Y28TR, # Y03536, # Y06130, and # Y06154 which will give you a round crossbar rack confirmed as a fit for your vehicle.
    view full answer...
  • 2023 Ford Explorer Roof Rack Recommendation for Bare Roof
    I have the perfect roof rack solution for the bare roof on your 2023 Ford Explorer! The Yakima SkyLine FX Roof Rack # Y95UV installs on your roof with the BaseClip Fit Kits # Y06154 and # Y06132 which clamp around your door jambs. This style of crossbar ends in the legs so it looks more like an OEM roof rack you'd find on an Explorer. I really like the Yakima systems because they are some of the most reliable we have to offer and they have small adjustments in the legs to get the best...
    view full answer...
  • Yakima Roof Rack Components Recommendation to Fit 2019 Mazda CX 5
    The Yakima Landing Pad 19 # Y00245 that you referenced has been confirmed by Yakima to fit the Skyline and Control Towers like you mentioned. Glad it worked for you as well! For the 2019 Mazda CX-5 Yakima recommends the BaseClip part # Y06130 and part # Y06154 when used with JetStream bars # Y00425 and BaseLine Towers part # Y28TR.
    view full answer...
  • Yakima CoreBar Roof Rack System For a 2020 Hyundai Santa Fe SEL Without Factory Rails
    The flush mounted rail system must be installed from the factory as there are no aftermarket kits to install them on your 2020 Hyundai Santa Fe SEL. For your Santa Fe I recommend the Yakima Roof Rack System. I have linked a video of this system installed on a similar 2019 Hyundai Santa Fe for you to reference. And you can see that they have the same rubber strips as your Hyundai. You will need the following parts. 2- Yakima CoreBar Crossbars # Y00421 4- BaseLine Towers for Yakima Crossbars...
    view full answer...
    Image 1 for


< Previous



Do you have a question about this Roof Rack?


Info for this part was:

Employee Daron K
Edited by:
Daron K
Employee Alex H
Written by:
Alex H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.