To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
Features:
Yakima CoreBars - 50" Long - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, Matthew of etrailer. And today, we're gonna talk about the Yakima Roof Rack System with the CoreBars on top of our 2023 Subaru Forester. That's gonna be a great option for you if you're really trying to get a lot more space out of the Forester, whether you have a lot of people with you, or it's already filled up with other luggage or items. So that's gonna be great if you have any longer items like skis, kayaks, or roof boxes. It's also gonna be a great system if you want to get this key to like with any of your other Yakima gear. So let's take a closer look at it.
Our system today is gonna be comprised of two parts. That first part is gonna be our 50-inch CoreBar crossbars, and the second part is gonna be our Yakima Towers. So we're gonna take a closer look at the crossbars. You'll notice we're gonna have these brackets up top, and that's gonna grab around here, and that's gonna be used to attach our towers to. You'll notice we also have this arrow shape to 'em and the arrow shapes will help 'em be more aerodynamic to help reduce that wind noise.
Moving to the tower, you notice we have this end cap at the very back of it. What I do like about that is it's gonna hide all your hardware. So this is gonna give you more of a clean finish, and that's actually underneath here is where your strap is gonna attach to. This strap is gonna be made of rubber, so it's not gonna be likely to scratch anything up. And since it wraps all the way around, it's gonna give you a very secure fit.
And one last thing to know about this is this plastic core we have in the back of it. You can actually go into our website and get that replaced, and put a metal locking core in that, and get that key to light to any of your other Yakima accessories. So there's gonna be a few things that set this system apart from some of the other crossbars you might see. The first thing is this is actually gonna be constructed from steel, rather than aluminum, and it's not gonna have that T-track up top, so you're not gonna be putting any T-track accessories on here, but it's gonna be great for this clamp on accessories, especially since it is made out of steel. It's also gonna have a higher weight capacity of up to 220 pounds.
But what I'd recommend doing is just checking what your roof is rated for and then going from the lowest rated component. As for how this is gonna sit up here, if I go from the top of our raised rails to the top of the crossbar, that's gonna be a little bit under three inches, which isn't too bad. What I suggest doing is taking the total height of your vehicle plus your crossbars, and then if you put any accessories on top of that, include that as well, so you know what areas you can make it under. As we overhang, we go from our tower to the end of the crossbar. There's gonna be about 3 1/2 inches which isn't too far. You're not gonna be likely hitting your head on here, but you should have some room to put some smaller accessories at the very end of here, like a ski carrier. And then talking about our next measurement is gonna be our spread. And since we have raised rails today, that's definitely a plus 'cause you can maneuver these wherever you need 'em to be and adjust for different crossbar spreads. Now, for what we have today, we have about three inches of crossbar spread, and I try to put 'em back as far as I can. They'll give you an idea of how this is gonna sit up here, and it's gonna sit at the very edge of the sunroof we have at the top. So you don't have to worry about that covering your sunroof. Now, if you have any really long accessories up here, you wanna open your hatch. That's something to definitely think about because if you have this too far back, it could impede you opening up the hatch. Overall, I think it's gonna be a great system for you if you really are trying to get a lot more space out of your Forester, especially if you like those towers too with how they secure to your raised rails and how they have that locking core at the very back of it to get it key to like the any of the other gear. Those crossbars are made of that steel which is very durable and has that higher weight capacity. Just make sure you don't overload your roof too. Now one of the downsides of these crossbars though is since they are made of steel, they are gonna be more prone the rusting. They do have that black vinyl coating on top of them, but if that coating gets scratched off, then those areas will be more prone to rusting. Now, if you want something that is gonna have a T-channel on top that can accommodate those T-channel accessories, and it's gonna be made of aluminum, so it's less likely to rust, then I'd actually recommend the Yakima JetStream Roof Rack System. It will be very similar to this, only with a different crossbar that could accommodate T-channel accessories and be made of aluminum. But if you like this one because you don't really plan on using any T-channel accessories, then I think this is gonna be a great option for you. As far as the installation, it is pretty straightforward, pretty easy to get on and off of here, but if you need a hand with it, just stay tuned, and we'll walk you through it. To start off the installation, we're just gonna lay everything out. So up front, we're gonna have our crossbar and the towers that go along with it and then the hardware that's gonna help us install the towers onto the crossbar. You have your end caps and then this tool with this built-in torque device. I also recommend grabbing a measuring tape just to make this a lot easier. We're gonna need this adapter, so we can put our towers onto our CoreBar. And when you place this on, you wanna make sure the side with the ridges is facing up. I like to place it on at an angle, putting one side in first, (adapter snaps) applying pressure until the other side clicks into place. Then you repeat this process on the other tower. We're gonna come over to our crossbar now and remove our end cap just by pulling it right off. Also recommend flipping it over. This makes this a little bit easier than grabbing the brackets that go on. And you wanna make sure you put this in the right orientation, or it won't fit on into place. So if you do have it upside down, make sure that threaded side is facing up and match the size together, so it just slides right on. If you get the first one on there, just suggest put you all the way to the other side and grabbing the second one, and repeating that process. And just make sure you put your end cap back into place. We're gonna come over to our tower now. I like to start with it upside down, and it just gonna look just like this. You'll notice we have this hole. You'll see this bolt that's inside of there, and if I push our strap in, you'll notice we have a bolt right beneath there, too, that we'll be able to tighten from the side. Now, if you don't see it, because this one's in the way, all you have to do is loosen that bolt up, until you push that strap and you're in the clear. At this point, I'd have to get control of that bolt. You can see it popping out on the other side. I like to line it up with this bracket with a threaded side, and you just place it right on top and bolt it into place. Another thing I'll note too, I just wanna make sure this isn't in the right orientation. So the side with the bolt is facing out, and the side with the strap is facing in. You just tighten that all the way down, until you hear that torque device start to click (clicks) just like that. We got both towers on. We're just gonna roughly place it on top of our roof. Now, before I get it up there, we wanna make sure this is in the right orientation, so I wanna make sure that this thicker side is gonna face forward and this thinner side, behind us. Once we have adjusted for that, we're just gonna place it up here. Try and get those straps underneath the raised rails, until it's just sitting on up here. You'll notice we already have a rear crossbar up here, and the process is gonna be the same for both of 'em. So at this point, what I like to do is make sure our tower's gonna be parallel with our other crossbar. So you can do that just by finding a point that's gonna be the same on both sides and measuring out. And if both of your towers at the, are at the same point, then you're good. We can also talk about getting the correct crossbar spread now. So if you already have one crossbar on here, what I suggest doing is just measuring from one to another, and make sure this is gonna be able to accommodate the gear that you have. Now, we can get our overhang, and what I like to do is just go from our tower to the end of the crossbar, and then I have to make sure this is equal on both sides. A way you can adjust this is just by grabbing onto your tower either pulling or pushing on the crossbar. What this is just doing at this point is just grabbing that strap and attaching that metal rod to these metal hooks. And then we're gonna come over to this bolt, not this one on the bottom, but the one above it right here. And I wanna tighten this one all the way down on both sides. (bolt clicks) We can move to the bolt below it now and tighten this. The one up top is to tighten your towers to your crossbar, and this one on the bottom is to tighten the strap itself. So when we're tightening this down, we wanna tighten it enough where it's just gonna make contact with your raised rails at first. After when it makes contact with those raised rails, then we wanna go to the other side and repeat that process, just going back and forth, so we don't tighten one side more than the other. And we have both sides tightened up. We can put on our end caps just matching it up to the shape of our tower, so it clicks in the place. I like to give it a good shake test at this point. Make sure everything feels secure and if it does, then you can load it up with whatever accessories you have and hit the road. But if you liked everything you saw today, that's just a look at the installation and some of the features of the Yakima Roof Rack System on top of our 2023 Subaru Forester.
Average Customer Rating: 4.8 out of 5 stars (123 Customer Reviews)
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
From start to finish, the folks at etrailer -- and I spoke to several people there, so it was a consistent corporate vibe -- were fantastic to deal with.
There were delays in getting my product that were on the supplier side and out of etrailer's control, yet etrailer folks kept me up to date and also worked on a customized solution.
My goal was to be able to carry my surfboard on the roof of our 2019 Hyundai Santa Fe to the beach more than 3 hours away. But the particular model we had had no existing racks, no recessed areas, nothing to fix racks to. Not even the dealer had a solution. I was sh*t out of luck.
But etrailer hooked me up. The racks did take me a while to put on, but most of that time was fine tuning to reduce “hum” while driving. I’m very happy with them.
Thanks to etrailer, I have gone surfing and can go surfing whenever I'd like to.
Works well, after getting them in place. On my Kia Sorrento it's very tricky to get the towers to fit the holes in the factory rails -- takes a lot of loosening and readjusting the bars.
I've just recently installed this setup on my 2015 Toyota Camry.
etrailer - Shopping for this rack was fairly simple, and the shipping from etrailer was quick and reliable. I received the rack in 2 different shipments but they both arrived at the same time. etrailer made sure the all the contents were available. They also have several resourceful videos on their YouTube page, which was helpful while shopping for the rack and during a few trouble shooting items while I was installing.
Yakima Core Bar - Overall a quality product. Everything necessary was supplied, including a handy measuring tape and some very well written instructions. The fit is clean and very sturdy. The only qualm I have is that the hex hole in the large anchor bolts are a bit larger than the supplied hex driver. Toward the end of the installation, the tool was worn and ended up turning inside the bolt itself (not due to over torquing whatsoever). I ended up having to use a hex set I had in my toolbox to complete the installation because the provided tool was starting to strip out the anchor bolt. With that said, the kit is still a great kit that meets my expectations.
Wind noise is quieter than my OEM VW bars on my 2017 Volkswagen GTI. It's noticeable, but nothing extreme - I believe that's just the price you pay when adding crossbars to a vehicle.
Verdict - etrailer has definitely met my expectations, and the Yakima kit provided is a well designed kit that fits well!
One quick phone call and Gwendolyn figured out exactly what I needed for our new car to use my old Yakima rack.
As described! Quick delivery!
Very good product. The Yakama towers and cross bars feel very solid and appears to be high quality. Very easy install. Others have complained about the instructions, but guess I'm a visual person because the pictures all seemed very clear to me and the install was very easy. They do sit higher than I expected. After adding a Rhino Rack cargo basket, we only have about 4-5" clearance below the garage door.
Great product great service
These crossbars feel like they are well made and sturdy. It took less than 30 minutes to install with the Ridgeline Towers. I love the look of the bars! Can't wait to load the Kayaks up and get out on the water.
Roof rack fits and works as advertised. Over the phone customer support for sales and install directions were very helpful and thorough. Geoff is an excellent brand ambassador who goes above and beyond to fulfill customer expectations. I will definitely be shopping at etrailer for my future vehicle needs. Well done!
Timely delivery of my order, as usual! Easy to install on my 2015 4Runner. After I had the mounts ready and put on both bars, I installed the front one and fine-tuned it, the second took even less time then. I now have the ability to carry up to 3 kayaks, perfect! etrailer is a great company!
Should include extra end caps just in case they fall off.
My experience with etrailer has been excellent. There was going to be a potential delay in one of the products, but their customer service promptly informed me, half the price of some of their competitors so can't really complain. In the end they got the part ahead of schedule and was able to ship in a timely manner. I will definitely keep them in mind for future purchases.
Very sturdy, well made. The assembly instructions are not too good but if you call Yakima they will provide additional instructions.
Customer service was excellent, they called me to tell me one item was backordered and how long it would be. Package was shipped with enough packing material. Install was pretty easy, some of the Yakima measurements in the manual are a couple inches off but no big deal. This will be used to carry a box for when the family takes trips. Can pile all the luggage up top and have more room in the car. I would recommend the Yakima corebar roof rack and etrailer! Their price was lower than 2 other sites I checked.
I am thrilled this got delivered sooner than anticipated! It was quite easy to install once you started actually putting it together and measuring everything out. I like that this can easily be removed and installed onto the vehicle.
Order was easy to place and delivered in less than a week as promised. The sales advice was perfect fit despite multiple pieces having been ordered. Used the rack once and very sturdy
Very happy with the Yakima roof top rack kit for my 2017 Ford Edge with glass roof. The instructions were a little confusing at first, but after reading through them a couple of times while working with the product they became much clearer. The Yakima fit site was helpful as well. After the initial cross bar mounting measurements and set up, attaching and detaching the racks from the roof is a very simple process.
Wonderful service from Kimberly at etrailer.com. I had ordered a roof rack in December for I car I had on order. Ultimately I purchased a different vehicle more than 3 months later and the roof rack and mounting parts were not compatible. I had no problem returning the unopened products and just needed to pay the postage. Kimberly made the process easy and seamless, making sure to send the new Yakama cross bars and necessary parts. It fits beautifully on my new car and setup was fairly simple with video support and step-by-step instructions.
Great product and Sales Support from etrailer.
I bought this for my Son as a Grad/BDay gift for a Honda HR-V which has slightly odd roof/door shape
He installed it himself said the install was straightforward but the instructions could use a little improvement.
etrailer Sales Support was great, I was a little concerned about getting the right parts and the return policy. Olivia was great to work with, she offered recommendations and matched the parts to the type and vehicle it was to be installed on along with a kayak mount.
All the parts arrived in mint condition with no missing pieces.
I'll for sure return to etrailer on future purchases.
I have a 2004 Toyota Camry, my purpose is to purchase this Yakima Baseline System for Rooftop tent. My 23Zero rooftop tent weighs 130 lb, so far it's super solid. I did some minor adjustments based on the shape and level of the roof when mounting it.
Great product! Relatively easy install, had the racks on for a few days now with no issues.
THERE'S A PIECE MISSING, A rubber cap on 1 of the crossbars
Feel solid, not too tricky to install
Etrailer is a supplier of quality products with GREAT service. These bars work great for our Chevy Cruze along with the rest of the necessary parts for the roofrack install.
My son is very pleased with his Yakima Rack. Glad HE MADE THE RIGHT CHOICE ! Iam back on line to order his bike attachments.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.