Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Silver - Qty 2
(24 reviews)
Price: $688.85
Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Silver - Qty 2
Item # Y37WB
Our Price: $688.85
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (24)
- Q & A (0)
- Videos (45)
- Photos
Yakima Roof Rack - Y37WB
- Aero Bars
- Crossbars
- 60 Inch Bar Space
- Yakima
- Silver
- Overhang
- 2 Bars
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 60" Long - Silver - Qty 2:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Clear anodized alloy finish is corrosion resistant
Yakima SightClip 31:
- Custom-fit clips and pads allow you to mount 4 SightLine or RidgeLine towers on your vehicle with flush, factory side rails
- Inner and outer clips tighten together with a single bolt for even, secure grip on rails
- Snap into place on DropHooks inside towers
- Powder coated stainless steel clips are durable and rust resistant
- Molded rubber pads fit the contour of your side rails
- Clip onto bottoms of towers
- Protect side rails from scratches and abrasions
Yakima SightLine Towers - Qty 4:
- 4 Low-profile towers mount Yakima crossbars to your vehicle with flush, factory side rails
- Pair with 2 Yakima crossbars and SightClips or RidgeClips to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Pivoting bases automatically adjust during installation to ensure towers are seated correctly
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima JetStream crossbars
- Safe and easy installation with included torque tool
- Clip holder adjusts on 3 axes for perfect fit on your flush rails
- SightClips or RidgeClips attach to hooks in tower assemblies and tighten together for even, secure grip on rails
- Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Durable, weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction
8000429 Yakima Jet Stream Cross Bars - Aluminum - 60" Long - Qty 2 - Silver
8006431 Custom Sight Clips and Pads for Yakima Sight Line and Ridge Line Towers
8001635 Yakima Sight Line Roof Rack Towers - Qty 4
Replaces Yakima RidgeLine Y00145
Video of Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Silver - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima JetStream Crossbars Roof Rack Installation - 2022 Ford Maverick
Hi, everyone. Aiden here with Etrailer. Today, we're gonna be taking a look at and showing you how to install this Yakima JetStream roof rack system on our 2022 Ford Maverick. Now the JetStream crossbar is gonna be the main piece of our roof rack. That's the part that goes across the roof and serves as the attachment point for all of our accessories. Now this is an arrow bar, thicker in the front and tapering off towards the back with a T-track channel in the top if you take off your end caps.
The T-track up top will be for any sort of channel-mounted accessories. Just slide it in through this weather strip and to your place that you wanna mount it. It's nice because the weather strip is one solid piece, and it doesn't require trimming, but for the most part, people are probably gonna be doing clamp around accessories, which work great with this type of crossbar because you get a nice wide platform to mount it onto. It's not super thick, so you shouldn't need any adapters. And for most rooftop accessories out there, it's gonna work right out of the box.
The Ford Maverick has a naked roof, and what that means is that there's no pre-existing rails or crossbars on top. So we're gonna need a fit kit to make this work, and the kit does come with that. That's basically gonna be a set of rubber pads that fit around this lift on the side of the roof and custom length clamps that will actually go inside of the door jamb to secure the roof rack to the roof. Now every vehicle is going to have a different length clamp and set of pads, but these are the ones that work for our Maverick, and it gets a really strong hold on the roof. The pads fit excellent around here, and Yakima's roof racks have a ton of different adjustment points to make sure that everything is angled the proper way to ensure a strong fit on the roof, which I like a lot.
The install process sometimes gets a little bit of flack from people down here in the shop because it is more involved, but I do think it results in a better fit. The crossbars themselves are 60 inches long, which gives you plenty of room to mount up accessories and does have a little bit of overhang. Depending on the accessories you wanted to carry, you could even shift these crossbars offset a little ways if you wanted to maybe use something like a load assist kayak carrier, which would require a bit of overhang to make that work. And if that wasn't quite enough to make it work for your specific accessory, you could always pick up longer bars. Yakima's bars have a track underneath that runs the entire length, so you can pick up those longer bars and trust that it will work with your existing system.
Now, as far as some other measurements go, because these clamps and pads are custom fit for a certain spot from the Maverick, we can't move this around and the spread between the crossbars is going to be pretty fixed. And for us today, that's gonna be 33 inches. So for any sort of rooftop accessories, we need to note our crossbar spread. Depending on what we're putting up here, it'll work with a certain range of crossbar spreads. I'd say 33 inches is a really solid place to be, and it should work for most rooftop bike racks, boxes, cargo baskets, things like that. A roof rack will also add height to our vehicle. From the tallest point of the roof in the middle to the tallest point of the crossbar, it's gonna be four inches. And from that same point on the roof to the underside of the crossbar is three inches. So three inches of space underneath is plenty of room for any sort of clamp around accessories we might have. And then four inches added to the top isn't too bad. It sits well below our antenna here. So if we're just rocking the roof rack, we shouldn't have to worry about things like our garage or drive-throughs, parking garages, things like that. You will need to be mindful of it as we add other accessories on top of it, especially things like a box because that adds a lot of height to our vehicle, but the rack alone isn't too bad. It does support a weight capacity of 165 pounds. That's for the roof rack, not necessarily the roof on your Maverick. Be sure to check and make sure that you're not overloading the roof's weight capacity because oftentimes it is rated somewhat lower than the rack itself, but with all that in mind, just make sure you're not overloading it and haul things safely. And overall, I think a roof rack is a really helpful tool to have. The Maverick is obviously a smaller truck, and it does have its limitations. If you're looking to carry things like lumber, maybe some kayaks, or a ski and snowboard carrier or a box to get some extra space, a roof is a great place to put that, and I think with a truck like this, you see that we have a ladder rack on the back already, it can work really well in conjunction with something like that. If we're hauling two by fours and we have really long extended loads, then we can have it supported from the bed all the way up through the cab. But even with just the roof rack, I think it's gonna be a great way to carry things like kayaks and other longer equipment for those fun weekends out on the lake or at the trails. But the installation process is one of the places where I think this really shines. The Yakima roof racks, like I mentioned before, can be a little bit more involved, but on the Maverick, it's actually really straightforward. So we'll walk you through that whole process right now. Now a couple things before you start your install. The instructions are gonna have a lot of measurements in them because these Yakima roof racks have many points of adjustment. So be sure that you grab the instructions out of the base pad fit pit here. That's going to have all the measurements that pertain to your vehicle or in our case, our Ford Maverick today. And then the instructions will tell you where those measurements and those codes all apply. We'll walk you through the process too for the rear crossbar. Our front one's already installed, but just make sure you make note of all those different measurements. We're gonna start off with our feet. We're gonna pop the covers off just by squeezing the end and pulling it out. And then from the box that our crossbars come in, grab our adapter blocks, snap those into place on the top. You'll hear a small snap with that. And then the T-slot blocks. Pop that in the top middle, flip it upside down, and use the included tool to start threading that in. There's gonna be a small door right here where you can get that tool in, and don't fully tighten this down yet, just enough so it's just about level with these plastic blocks here. Now if that bolt underneath isn't exposed, you can see there's a small door right there. Yours might have just come undone or not, but if it's not available to see, just pull that clip back until you hear a click, and that will expose the bolt. We can then take our foot with that block in place and slide it into the underside of our crossbar, taking the end cap off, and getting that slid in on both sides, making sure that the block seats within that track well. Now if it doesn't want to go at first, you might have it misaligned, but it also just might be that you tightened it up too much. So you can loosen it up to get it to slide in a little bit easier if need be. And then when you're done, pop the end cap back on. Now it's gonna be really hard to see, but on the underside of the track, there's going to be markings with numbers. That's your measurement strip. Again, here in the shop it's probably really hard to see with the light, but that's going to be one of our first measurements we take. Your instructions will have an M1 and an M3 measurement. That's for the front and rear crossbar. So just get the base of your foot lined up with the appropriate measurement for your vehicle, and start to tighten it down in place using that first bolt that we used, but don't fully tighten it yet, just enough to keep it still. Once everything's in place, we need to set our pitch and our toe. Those are gonna be two more of the codes in your instructions labeled P1 and P2, and then T1 and T2. Those P codes are gonna be a letter A, B, or C and correspond to one of the dashes on the underside of your foot. And then same thing with the T code. That's gonna be a one, two, or three and correspond with its own set of dashes. So that P code is going to refer to the pitch of the tower. You can kind of see it moving back and forth right now. For our Maverick today, ours is B for both the front and the rear crossbar, which is nice and easy 'cause that just means it's centered up. We'll just fully tighten it down until our tool clicks. (tool clicks) And then for T, that's going to be this second bolt on the outside here. And if you loosen that up, that's gonna be for how our foot is oriented this way. Now, you'll wanna leave everything loose, but for us, we can just tighten it right down where it sits because it comes in the number two position, and that's just where we want to keep it. We can then take our base pads and clip them into the feet with the arrow on the bottom facing out. If the arrow's a little hard to see, you can just look for this notched cutout. That's gonna face towards the outside as well. With all this assembled, we can put it onto our roof now. Your kit in your instructions are gonna have another few measurements, M2 and M4. The M2 measurement is from the front end of your windshield to the first point where your clamp is gonna touch. And the M4 measurement is from the first crossbar to the second crossbar. Now I've gone ahead and since our first one's installed, measured it out, and put a piece of painter tape here as a way to mark out that spot, so I know where to set this. I've done it on both sides to also make sure that this is running parallel to our first crossbar, but I'll set this up in place, get the lip of our base clip here, and our base pad matching up with the roof here. And then we can open up our door and start installing our clamps on both sides. Now it's not quite flush with that ridge, but once we start tightening that clamp, it will pull it. So for now, what we're gonna do is push this first clip closed that we did at the very beginning and open up this second one here. And if you use painter tape, just pop that off and set it to the side. We can then take our clip and actually slide this in. There's a small slot under here where we can slide it in, and this bolt here will hook around it. And we'll notice that it's kind of sprung into place right now. There's two bolts we need to worry about tightening, the one where that clip is and the one up here a little bit higher. We're gonna start tightening that higher one first, and you'll notice that the clip starts to go down flat and sit against the side of the roof. Now as you're doing these, make sure you do them evenly on both sides. I've got the other one started first just a little bit here, and once it starts making contact, we can move to our other bolt, which will draw the clip up. Our goal here is to get the clip to sit as flush with the roof and that door jamb as possible. As we jump back and forth between tightening the two different sides, you'll get to a point where your tool will eventually start to click. That's when we know it's torqued down properly. We wanna make sure that that upper bolt is torqued down first on both sides. So once we hear that click, we'll know that that one's good to go. (tool clicks) And then I've already done the other side. We can do the same thing for this lower bolt for our clips, again, going back and forth evenly until they start to get properly torqued down. (tool clicks) And once you hear that click, you can close this plastic door here and pop our end caps back on. When the clips are in place, the door can close and the end cap will just hook in starting at the bottom and snap in at the top. If you chose to pick up optional lock cores, you could lock 'em up at this time, but right out of the box, they don't include them. So at that point, you're good to go. I'd like to give it a good shake test first just to make sure that nothing's shifting around either front to back or side to side. And we're good. So we're ready to hit the road. And that'll do it for our look at and installation of the Yakima JetStream roof rack system and seeing how it installs on our 2022 Ford Maverick. Thanks for watching.
Customer Reviews
Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Silver - Qty 2 - Y37WB
Average Customer Rating: 5.0 out of 5 stars (24 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: Jonathan05/24/2024
Works well, after getting them in place. On my Kia Sorrento it's very tricky to get the towers to fit the holes in the factory rails -- takes a lot of loosening and readjusting the bars.
by: Tim 10/18/2023
One quick phone call and Gwendolyn figured out exactly what I needed for our new car to use my old Yakima rack.
by: Hurtlocker08/12/2023
Strong, Solid Bars, Super Light, and really easy to install!
by: Adam K05/14/2023
Pretty straight forward installation. Instructions were easy to follow.
by: Richard 04/06/2023
Happy with the purchase. Crossbars shipped and received quickly.
by: Nicholas07/11/2023
Order was easy to place and delivered in less than a week as promised. The sales advice was perfect fit despite multiple pieces having been ordered. Used the rack once and very sturdy
by: Kevin M.08/29/2020
Work exactly as they should and hold everything securely to my vehicle without interfering with the car’s normal operation. etrailer had best prices based on my research. These bars are much quieter than traditional round bars and worth the added expense.
by: Steve K.04/23/2019
Easy to install thanks to the etrailer video. I have used the rack system on many long distance trips including driving from South Carolina to Yellowstone.
by: Troy01/22/2022
Easy to install and sturdy. I carry a 9' pontoon boat on my camper shell using this rack at freeway speeds with no problems.
by: Mark06/30/2023
Works as expected and feels solid
by: Kevin07/04/2020
We had to wait on stock a little longer than expected BUT etrailer kept me informed of the progress. Once I received the products installation was a breeze thanks to the instructional videos.
by: Sara03/19/2019
Yakima is always great, the bars are just right for my kayaks and look great too.
by: Mike 05/20/2020
Great product... love that fact that I can take the bars on and off without having to disassemble the system. Very convenient when not its not being used.
by: Brian10/29/2022
Great product, well built and easy to i nstall.
by: Dan H06/17/2021
Courtney was excellent. Helped with all my difficulties. Very professional and knowledgeable. She is an outstanding employee and should be commended.
by: George05/29/2024
by: Scott 05/20/2024
by: Frederick 01/13/2024
by: Derek 12/13/2022
by: Chris 04/06/2024
by: Alexander10/03/2021
by: Edwin 07/30/2021
by: Janet 08/23/2021
by: Frank 08/07/2021
by: James 12/12/2020
25
388
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- How to Determine Correct Roof Rack For 2024 Kia TellurideI'm going to go ahead and respectfully disagree that we're idiots, Paul. I'm confident we can figure out the combination for a roof rack on your 2024 Kia Telluride, and there are three possible options Kia has for your roof - flush-mounted rails, raised side rails, and a bare roof. I made some diagrams below showing test fits on a Kia Telluride with photos from the nice folks at Yakima so you can see the difference (please note these are just test fit photos, and not exactly how the rack...
view full answer...
- Roof Rack for Thule Canyon XT Roof Cargo Basket on 2020 Subaru AscentYour 2020 Subaru Ascent will require a roof rack to carry any cargo basket, including the Thule Canyon XT Roof Cargo Basket # TH859XT. Assuming you have raised side rails that run front to back on your Ascent, here is the roof rack that will work with your Subaru: - Yakima JetStream Crossbars # Y00429 (Silver) or # Y00426 (Black) - TimberLine Towers for Yakima Crossbars # Y33TR As for the paddleboards, there isn't anything designed to carry them in a cargo basket so you can use whatever...
view full answer... - Recommended Roof Rack for a 2024 Acura RDX w/ a Naked Roof Congrats on the new SUV! Yes, we do have a way to attach a roof rack to your 2024 Acura RDX even though you do not have roof rails. It is the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06174 BaseClip Fit Kit for Yakima BaseLine...
view full answer... - Recommended Roof Rack for a 2024 Acura MDX w/ No Roof Rails Yes, we do! To add a roof rack to your 2024 Acura MDX with a naked roof you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178 This aero bar roof rack system has a 165 lbs capacity....
view full answer... - What Roof Rack Do You Recommend for a 2007 Honda Element SC?Absolutely! For a great roof rack system that will fit your SC version of the 2007 Honda Element, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2 # Y00429 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - Landing Pad 9 for Yakima SkyLine and Control Towers - Qty 4 # Y00229 - (Optional for extra security) Yakima Same Key System (SKS) Lock Cores (QTY 2) # Y07202 With the above...
view full answer... - Roof Rack For A 2017 VW Golf Sportwagen To Use With The Thule HullavatorWe can definitely set you up with a roof rack for your 2017 Volkswagen Golf Sportwagen that is compatible with the Thule Hullavator # TH898. The Hullavator requires the crossbar to overhang past the tower by 4" to 8", so it will be best to use a solid aero bar setup with a slightly longer crossbar. For that I recommend the Yakima Jetstream roof rack. This will consist of the following parts: Yakima TimberLine Towers for Yakima Crossbars # Y33TR Yakima JetStream Crossbars - Aluminum - Silver...
view full answer... - Best Roof Rack For 2024 Kia EV9 With Raised Side RailsThe best roof rack for your 2024 Kia EV9 with raised side rails is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - TimberLine Towers for Yakima Crossbars # Y33TR I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the bar and wind noise. It is also highly durable,...
view full answer... - Yakima Roof Rack that Fits 2019 Honda Passport with Raised RailsSince your 2019 Honda Passport has raised rails the roof rack feet that fit it are the ones that wrap around the bars whereas the flush bar roof styles are the ones that have options that attach directly to it. So for a Yakima there is the Jetstream part number # Y00429 and # Y33TR which is an aero shaped bar setup that wraps around your raised rails. This is a very solid setup that will work great and is no less reliable than any other option.
view full answer... - Rooftop Cargo Carrier Recommendation for 2020 Toyota Highlander with Panoramic RoofFor a great option for your 2020 Toyota Highlander with panoramic bare roof, I recommend the Thule Force XT XXL # TH6359B. This box has the largest internal dimensions out of all of our cargo boxes. It also comes with a dual-opening lid that can be accessed from either side of your vehicle. I confirmed that your trunk can fully open with this box mounted on your roof. If you already have crossbars, I recommend measuring your bars to make sure they do not exceed 3-1/2" wide x 1-11/16"...
view full answer... - Roof Rack For 2015 Toyota Highlander For Naked RoofThe video you referenced is for a 2015 Toyota Highlander with flush mounted rails; I checked directly with Thule and they do not have a roof rack fit for a naked roof on a '15 Highlander, just one with those flush mounted rails. So if you want a rack, you'd need a new set up. For that I would go with Yakima, as it is the that is the most similar in quality to a Thule rack. The parts that make up a Yakima roof rack for your 2015 Toyota Highlander are the following: - Yakima JetStream...
view full answer... - Does Thule Force XT XL Rooftop Cargo Box Fit Yakima Roof Rack on 2023 Acura MDXYes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails. Bare Roof - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06163...
view full answer... - Recommended Roof Rack for a 2023 GMC Yukon XLTo add a roof rack to your 2023 GMC Yukon XL, you will want the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 Black or item # Y00429 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV I have attached a couple of pictures below that will show you what this roof rack looks like and how to...
view full answer...
- Yakima Jetstream Roof Rack that Fits 2024 Ford Escape with Naked RoofYes, we do have a Yakima Jetstream roof rack that fits your 2024 Ford Escape with the part numbers # Y00429, # Y28TR, # Y06137, # Y06152. We recently installed all of the roof racks we offer and everyone agreed the Jetstream was the nicest and easiest to install.
view full answer... - Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
view full answer... - Recommended Roof Rack System For 2021 Kia Telluride LX with Naked RoofThe only company at the moment (June 2023) that makes a roof rack system for your 2021 Kia Telluride LX with a naked roof is Yakima, so for a roof rack system you'll need the following components: Crossbars # Y00429 Feet # Y28TR Fit Kits # Y06125 and # Y06165 I'd also recommend adding the locks # Y07204 to secure the roof rack to your roof to deter theft. Out of all of the crossbar options for your vehicle this is by far the best due to the Aero design to cut down on wind noise the most,...
view full answer... - Parts Needed To Install 60" JetStream Bars On A 2021 Toyota Tacoma Double Cab With Factory RailsWe can definitely help set you up. To install a pair of 60" Yakima JetStream bars on your 2021 Toyota Tacoma Double Cab with factory rails, all you will need is a set of TimberLine Towers # Y33TR, and your crossbars. We have the 60" JetStream bars available in silver # Y00429 or in black # Y00426.
view full answer... - Recommended Roof Rack for a 2024 Nissan Pathfinder w/ Raised Rails I would be happy to! To add a Yakima roof rack to your 2024 Nissan Pathfinder you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft. A great perk of Yakima's products is you can...
view full answer... - Whats The Longest Roof Rack Available For 2023 Toyota Highlander For Thule HullavatorThe longest crossbar that'll work with the flush roof rails on your new 2023 Toyota Highlander Hybrid Platinum is 50" and is the Yakima roof rack system which uses the following parts: Crossbars # Y00429 Towers # Y53TR Landing Pad # Y66VR This will be long enough to use both but as each one weighs over 40lbs, plus the roof rack weighs about 15lbs you'd be overloading your roof with two kayaks and two hullavators as your roof only has a 165lb capacity per Toyota.
view full answer... - Roof Rack Recommendation for 2021 Toyota Highlander with Naked RoofHey Ronnie, I attached a link to this page that shows all of the roof racks that are a fit for your 2021 Toyota Highlander with a naked roof but my favorite option is the Yakima Jetstream part # Y00429, # Y28TR, # Y06153, # Y06132 as we had chance to install all of the racks we carry and we all agreed the Yakima racks are the nicest and the easiest to use. This is a through bar design which means the bars are longer than the feet of the rack which is great for if you need max bar space. If...
view full answer... - Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
view full answer... - Yakima Roof Rack for 2018 Honda Odyssey that Can Fit Thule Hullaport XTThe Yakima HD bar is too thick for the Thule Hullaport XT part # TH849000 to attach to so for your 2018 Honda Odyssey you'd be better off with the JetStream roof rack part numbers # Y00429 and # Y33TR.
view full answer... - Yakima Crossbar Length For 2022 Lexus GX 460 & HullavatorI checked with Yakima regarding the crossbar length, and they do say 50, which is odd for your 49 inch rails. With that distance between your rails, don't use the 50 inch bars, use the 60 inch long JetStream bars, either Silver # Y00429 or Black # Y00426. The rest of the parts for the Yakima rack on your 2022 Lexus GX 460 remain the same; Towers # Y53TR, Landing Pad 30 # Y25ZR and Lock Cores # Y07204.
view full answer... - Will Rhino-Rack Crossbars Fit On Yakima BaseLine Towers? The top channel on most crossbars like the Rhino-Rack and Yakima are similar but you should never mix and match towers and crossbars between different manufacturers. Their components are designed to work specifically with each other and your Yakima towers may not work properly with the Rhino-Rack crossbars. Instead you will want to stay with the Yakima crossbars from the list below to ensure they fit together properly and you have a manufacturer who will stand behind the warranty for the...
view full answer... - Square Bar Roof Rack that Fits 2020 Ram 1500 Quad CabThule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
view full answer... - Picking Between 50 and 60 inch Yakima Jetstream Roof Racks for 2021 Kia TellurideGoing with a longer crossbar does give you more space to mount roof accessories and carriers but the longer bars do tend to get in the way a little more and create a little more wind noise. So really it comes down to considering how many things you plan to carry on the roof rack and how wide they might be. Now that said the 60 inch Jetstream rack Yakima offers part numbers # Y00426, # Y28TR, # Y06125, and # Y06165 is the correct rack for if you have a naked roof and the 50 inch rack part...
view full answer... - What Do I Need to Mount a Cargo Box on a 2020 Hyundai Palisade?In order to have a cargo box on your 2020 Hyundai Palisade, you will need a roof rack system with crossbars in order for you to mount the box and cargo. Compatible systems depend on whether your vehicle has a bare roof or flush factory side rails. If your vehicle has a bare roof, I recommend the following parts: - Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2 # Y00422 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine...
view full answer... - What is the Best Crossbars and Roof Rack for a 2024 Acura MDX w/ Flush Side Rails?Congrats on the new vehicle! To add a set of crossbars to the side rails on the roof of your 2024 Acura MDX, I recommend the roof rack by Yakima which requires the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y49AR
view full answer... - How to Determine Correct Roof Rack For 2024 Kia TellurideI'm going to go ahead and respectfully disagree that we're idiots, Paul. I'm confident we can figure out the combination for a roof rack on your 2024 Kia Telluride, and there are three possible options Kia has for your roof - flush-mounted rails, raised side rails, and a bare roof. I made some diagrams below showing test fits on a Kia Telluride with photos from the nice folks at Yakima so you can see the difference (please note these are just test fit photos, and not exactly how the rack...
view full answer... - Roof Rack Options For A 2015 BMW X5I am sorry but the Thule 6007 Fit Kit # TH186007 will not be compatible with your Thule 460 Podium Feet # TH460R. The 4023 kit has been discontinued for almost 3 years now so unless you can find one secondhand, getting an entirely new setup will be your only option. If you want something other than Thule that is completely understandable. We suggest the following options: Rhino Rack Rhino-Rack Vortex Aero Crossbars # RRVA137B-2 Rhino-Rack SX Series Legs # RRSX026 Yakima Yakima CoreBar...
view full answer... - Recommended Roof Rack for a 2023 Mazda CX-50 w/ Flush Rails That is helpful and we do have a Yakima roof rack that will attach to the flush rails on your 2023 Mazda CX-50. It is the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system has a 165 lbs capacity. I recommend...
view full answer... - Recommended Yakima Roof Rack For a 2023 Maxda CX-5 With Flush Mounted Roof RailsI recommend going with the Yakima JetStream roof rack on your 2023 Mazda CX-5. You will need the Crossbars # Y00425, Towers # Y64AR and Fit Kit # Y39AR. These crossbars have the integrated channel for adding roof mounted accessories on your roof which are not capable of clamping around the bars. I recommend including the Lock Cores # Y07208. This will allow you to secure your roof rack and 4 other Yakima same key compatible accessories with the same key.
view full answer... - Replacement Yakima RidgeLine Tower for 2022 Hyundai Tucson with Flush RailsTo replace one of the RidgeLine Towers # Y00145 that are used for the flush rails on your 2022 Hyundai Tucson you need the part # 8880624. This is the tower itself with the cover. Feel free to send in your photos if you'd like, but this is the only RidgeLine tower system Yakima has made. Please note that the RidgeLine system is being phased out as of right now (December 2022) and is being replaced by the newer SightLine design. If you end up needing to do a complete overhaul of your current...
view full answer... - Roof Rack Recommendation for 2017 Ford Edge with Panoramic SunroofWe have a variety of roof rack options that fit your 2017 Ford Edge with the glass roof but I really like the Yakima JetStream system because it's fine-tuned to fit your vehicle like a glove and keep the crossbars level with each other. The correct parts will depend on if you have the flush rails or a naked roof. Flush Rails 50" JetStream Crossbars - # Y00425 SightLine Towers - # Y64AR SightClip Fit Kit - # Y79AR Naked Roof 60" JetStream Crossbars - # Y00426 BaseLine Towers - # Y28TR BaseClip...
view full answer...
- 2021 Kia Telluride With Flush Rails and 70 Inch Yakima JetStream CrossbarsWe only carry the Yakima JetStream Crossbars at 70" length in black as part # Y00427. The SightLine Towers are # Y64AR and a confirmed fit for your 2021 Kia Telluride. The Fit Kit is # Y34UR. You can also add theft-deterring locks with part # Y07204.
view full answer... - Can I Put 70" Yakima JetStream Bars On A 2024 Kia Niro PHEVYou absolutely can put your Yakima JetsStream bars on your 2024 Kia Niro PHEV with factory flush rails. To do so you will need the following parts: SightLine Towers for Yakima Crossbars # Y64AR SightClip Fit Kit for Yakima SightLin3 Towers # Y27AR Since the mounting channel on the Yakima crossbar runs the full length of the bar, you can mount virtually any size crossbar on your roof. That said, we recommend a 50" bar # Y00428 for the Kia Niro. So while your 70" bars will still fit, there...
view full answer... - Yakima HD Roof Rack and LockNLoad Fitment on a 2021 GMC Yukon AT4The parts you need to build a Yakima HD roof rack kit for the flush rails on your 2021 GMC Yukon AT4 includes the following parts: 60" HD Crossbars - # Y01157 HD Bar SL Adapter - # Y03541 SightLine Towers - # Y64AR SightClip Fit Kit - # Y44UV Lock Core Kit - # Y07204 (optional) This will work great with the Yakima LockNLoad Platform Rack for Crossbars # Y45UV, but we still need to talk about the weight ratings as you do bring up a great point. The Yakima HD bars are actually rated for...
view full answer... - Roof Rack Recommendation for a 2023 Honda CR-V with Flush RailsThule currently (March 2023) doesn't have a roof rack fitment for your 2023 Honda CR-V but I do have an alternative option for you through Yakima with their SightLine System: - 50" JetStream Crossbars # Y00425 - SightLine Towers # Y64AR - SightClip Fit Kit # Y44UR - Lock Core Kit # Y07204 (optional) If you let me know what you plan on using the roof rack for I'd be more than happy to make an additional recommendation for you!
view full answer... - Recommended Roof Rack for a 2024 Mazda CX-50 w/ Flush Rails To add a roof rack to a 2024 Mazda CX-50 with flush rails, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 in Black or item # Y00428 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same...
view full answer... - Roof Rack and Kayak Carrier Recommendation For 2015 Mini Cooper 2 DoorI am happy to recommend a roof rack and kayak holder for the 2015 Mini Cooper 2 door. I recommend Yakima roof rack part # Y00425 for the bars, part # Y64AR for the feet and ft kit part # Y06009. This is a aerodynamic bar system that will cut down on wind noise and allow you to carry your kayaks. For the Kayaks I recommend, Yakima JayLow Kayak Carrier part # Y04073 because you can carry up to 2 kayaks with one carrier compared to most J-style carriers that only allow you to carry 1 kayak....
view full answer... - Recommended Roof Rack for a 2023 Hyundai Palisade w/ Flush Side Rails To add some crossbars to your 2023 Hyundai Palisade, you will want the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y79AR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent...
view full answer... - Best Way to Carry Two Kayaks on 2019 Mazda CX-5 With Flush Side RailsWe do have a solution for you, but for your 2019 Mazda CX-5, the issue isn't only actually the weight capacity of the roof, it is that there is no way to fit a combination of the Thule Hullavator Pro Kayak Carrier # TH898 with the Yakima ShowDown Kayak Carrier # Y04081 (or two of either carrier) on any roof rack for your 2019 CX-5 because they take up far too much space on your crossbars. Additionally, there isn't enough space on roof rack crossbars for a '19 CX-5 to fit both a Hullavator/ShowDown...
view full answer...
- Towers for Yakima RoundBar on 2024 Honda CR-V HybridThere are towers available that will allow you to install your Yakima RoundBars on your 2024 CR-V Hybrid. You will need the following: -SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 # Y64AR -RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 -SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y44UR If you have Yakima Same Key System locks you can transfer them over or you can add new locks using...
view full answer... - Recommended Yakima Roof Rack For A 2023 Acura MDX Yes, we do have a roof rack available that will fit your 2023 Acura MDX. This roof rack consists of the following parts: Crossbars - Yakima Jetstream 50' # Y00428 Towers - Yakima SightLine # Y64AR Fit Kit - # Y49AR It is also recommended (but not required) to get locks for the roof rack for added security. If you are interested you will want part # Y07204. This will be everything you need to be able to mount your Yakima Skybox 12 # Y07334 to your roof. Please keep in mind that for the...
view full answer... - Is The Malone FoldAway Carrier Compatible With Subaru Outback Factory Crossbars From what I can find in the online owner's manual Subaru just doesn't want you exceeding 150lbs with the factory crossbars, which is same capacity for the Malone FoldAway-5 Kayak, Canoe, and SUP Roof Rack # MAL38FR that you were looking at. They aren't really descriptive with the shape or dimensions of the factory crossbars so you'll want to ensure that they fall within the requirements of the # MAL38FR, which I have pictured below. If your crossbars fall outside of these requirements...
view full answer...
- Recommended Roof Rack for a 2024 Hyundai Tucson w/ Flush Mounted Roof Rails Congrats on the new SUV! Yes, there is a way to install a roof rack on your 2024 Hyundai Tucson with rails even though it has the panoramic sunroof. I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system...
view full answer... - Roof Rack For a 2023 Acura MDX With Flush Mounted Roof RailsI recommend using the Yakima JetStream roof rack on your 2023 Acura MDX as Thule only offers a rack for a naked roof and does not yet support your roof rails. The Yakima will fit your flush roof rails with the Crossbars # Y00425, Towers # Y64AR and Fit Kit # Y49AR. The Yakima Same Key System # Y07204 will allow you to secure the towers to your roof.
view full answer... - Best Roof Rack for a 2022 BMW X3Thank you for reaching out! The best roof rack for your 2022 BMW X3 is the Yakima JetStream system that uses the following parts: 50" JetStream Crossbars - # Y00425 SightLine Towers - # Y64AR Fit Kit - # Y62CR Lock Cores - # Y07204 (optional) This system installs directly to the flush rails on the roof of your BMW X3 and gives you one of the quietest, sleek-looking roof racks on the market. Not only do you get the 165 lb weight rating, but you also get the most customized fit out there...
view full answer... - Recommended Roof Rack for a 2019 Mazda CX-5 w/ Roof Rails I have an alternative but the Rhino-Rack Vortex Aero Crossbars item # RRVA118B-2 will only fit the 2019 CX-5's that don't have the factory installed rails. There's no kit that will attach them to your vehicle you would have to rip your rails off and that's not a viable option. Instead, I recommend using the roof rack by Yakima to install a set of crossbars on your 2019 Mazda CX-5. You will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item...
view full answer... - Best Roof Rack for a 2022 BMW X3Thank you for reaching out! The best roof rack for your 2022 BMW X3 is the Yakima JetStream system that uses the following parts: 50" JetStream Crossbars - # Y00425 SightLine Towers - # Y64AR Fit Kit - # Y62CR Lock Cores - # Y07204 (optional) This system installs directly to the flush rails on the roof of your BMW X3 and gives you one of the quietest, sleek-looking roof racks on the market. Not only do you get the 165 lb weight rating, but you also get the most customized fit out there...
view full answer... - Recommended Roof Rack for a 2023 BMW X5I checked with Yakima and yes, you can definitely swap out crossbars to adjust the look. The 50" Yakima JetStream Crossbars item # Y00425 will work with the legs and fit kit for the recommended Yakima roof rack set up we have listed for your 2023 X5. I have listed the other parts you will need below including the 60" crossbars: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip...
view full answer... - Recommended Roof Rack on a 2023 BMX X5 M50 w/ Flush Rails Thanks for the picture! The 60" crossbars might be a bit wide. The roof racks with the longer crossbars are typically used for kayak carriers or people that need to mount two bike racks. I recommend going with more of a flush mount set up and we do have one made by Yakima. It is the 2023 BMW X5 roof rack by Yakima and it includes the following parts: Yakima SightLine FX Roof Rack for Flush Side Rails - JetStream Aero Crossbars - Black - Qty 2 item # Y73UV SightClip Fit Kit for Yakima...
view full answer...
- Recommended Parts to Add a Roof Rack to a 2024 BMW X5 w/ Flush Roof Rails Since your 2024 BMW X5 has the flush roof rails, I recommend the roof rack by Yakima which includes the following parts: Yakima SightLine FX Roof Rack for Flush Side Rails - Aero Crossbars - Black - Qty 2 item # Y73UV SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y62CR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
view full answer... - Will Roof Rack Work with a 2020 BMW X3 with a SunroofIf Thule warns against using the Thule AeroBlade Edge Roof Rack on your 2020 BMW X3 with a sunroof, then I will second them. Instead, I recommend going with a system that has been shown to work with your sunroof. It's the Yakima Roof Rack. The crossbars are the JetStream Crossbars, part # Y00425. The towers are the SightLine Towers, part # Y64AR. The fit clip is part # Y62CR.
view full answer... - Roof Rack Recommendation for 2023 BMW X5 with Flush Rails for Yakima Bike RackYakima has an OEM style roof rack that fits your 2023 BMW X5 with flush rails with the SightLine FX rack part # Y73UV and # Y62CR. This will give you a great looking and very quiet rack that will work well with your current Yakima bike rack.
view full answer... - Are There 60" Crossbars for a 2018 BMX X3I do have an option for you but those are both pretty long crossbars for this vehicle, it's not something that you can add easily, or legally for that matter as the crossbars can't stick out further than the side mirrors in most states. That said, we do still have a setup for you such as the one below. Yakima CoreBar Crossbars part # Y00422 SightLine Towers for Yakima Crossbars part # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers part # Y62CR
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.