Yakima SightLine Roof Rack for Flush Rails - HD Crossbars - Aluminum - Black - Qty 2
(44 reviews)
Price: $737.85
Yakima SightLine Roof Rack for Flush Rails - HD Crossbars - Aluminum - Black - Qty 2
Item # Y34PB
Our Price: $737.85
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (44)
- Q & A (0)
- Videos (12)
- Photos
Yakima Roof Rack - Y34PB
- Square Bars
- Crossbars
- 60 Inch Bar Space
- Yakima
- Black
- Overhang
- 2 Bars
Heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.
Features:
Yakima HD Crossbars - 60" Long - Black - Qty 2:- Heavy-duty crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima roof rack towers and a fit kit to create a complete system
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Accessories can be mounted in top and bottom channels
- Rubberized strips in top channels reduce wind noise and drag
- Keep dirt and grime out of crossbars
- Provide cushioning and slip resistance for your cargo
- Bottom channels allow for easy installation on Yakima truck bed rack towers
- SL adapter allows bars to work with BaseLine, TimberLine, SkyLine, and RidgeLine towers
- Etched measurements on bottom of bars help center rack on your vehicle
- Heavy-duty yet lightweight aluminum bars are durable and rustproof
- Plastic endcaps help to keep water and debris out of bars
- Integrated tie-down points make it easy to secure gear
Yakima SightClip 55:
- Custom-fit clips and pads allow you to mount 4 SightLine or RidgeLine towers on your vehicle with flush, factory side rails
- Inner and outer clips tighten together with a single bolt for even, secure grip on rails
- Snap into place on DropHooks inside towers
- Powder coated stainless steel clips are durable and rust resistant
- Molded rubber pads fit the contour of your side rails
- Clip onto bottoms of towers
- Protect side rails from scratches and abrasions
Yakima SightLine Towers - Qty 4:
- 4 Low-profile towers mount Yakima crossbars to your vehicle with flush, factory side rails
- Pair with 2 Yakima crossbars and SightClips or RidgeClips to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Pivoting bases automatically adjust during installation to ensure towers are seated correctly
- Safe and easy installation with included torque tool
- Clip holder adjusts on 3 axes for perfect fit on your flush rails
- SightClips or RidgeClips attach to hooks in tower assemblies and tighten together for even, secure grip on rails
- Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Durable, weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction
8001157 Yakima HD Bar T-Slot Crossbars - Aluminum - Black - 60" Long - 500 lbs - Qty 2
8006455 Custom Sight Clips and Pads for Yakima Sight Line and Ridge Line Towers
8001635 Yakima Sight Line Roof Rack Towers - Qty 4
Replaces Yakima RidgeLine Y00145
Video of Yakima SightLine Roof Rack for Flush Rails - HD Crossbars - Aluminum - Black - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima JetStream Crossbars Roof Rack Installation - 2022 Mazda CX-9
Hey everybody. Cooper here at etrailer. Today we're going to be taking a look at our Yakima roof rack system and how to install it. It does come in three major components that we'll get into as we start to talk about 'em on our 2022 Mazda CX9. Now if you wanna carry around some of those longer items like skis or snowboards, maybe need some additional storage like your rooftop cargo basket, or just wanna keep some of those dirtier items outta your car like mulch or maybe fertilizer. The first thing we're going to need for all those accessories is a roof rack system.
The first component we're going to look at in our roof rack system is going to be our crossbar here. Now our crossbar is going to be the Jet Stream Yakima crossbar which just means it has this nice arrow design to it where kind of starts a little fatter in the front and tapers off towards the back. Now this is just to help with some of that wind drag and noise that usually comes with putting stuff on top of your roof. It's going to be made of aluminum, which just means it's going to stay lightweight and very rustproof as we take our roof rack through the elements. And we even do have a T track here up top and it's my favorite kind of T track where if you want to install accessory you just have to push it kind of down and set it to wherever you need.
We're not going to have to pull up our wind strip and cut it to different specs. A nice way that our crossbar does interact with our CX9 is that there is plenty of space here in case we wanna use any clamping accessories between our roof and our crossbar that they just fit right through. Don't have to worry about damaging your roof at all for that to clamp down. Also coming down to the bottom of the crossbar if you can see that there is no wind strip, your kit will come with one. But because there is no permanent installation on this we have opted not to put our wind strip in today.
Then it does fit nicely into our sightline tower here which is just what's going to be kind of the mid piece between our crossbar and our fit kit. It does have this plastic covering when you're all done. That just pops right off. Now all of our inner mechanisms and tie-down points are gonna be behind this guard which is kept in place by this plastic lock core which is just used by a flathead screwdriver to kind of unlock and lock. But you can replace this with the sand key system for Yakima, which is a metal lock core using a key in case you have any other Yakima products or just want to upgrade to a key system instead.
The last piece to talk about in terms of our overall roof rack system is going to be the fit kit which is going to sort of have that custom molding to our vehicle. You can see that there's a hole right here. There's actually one right behind our fit kit as well and there's a little piece of rubber that you'll be able to see during the install process that really helps secure it all down. And looking on the outside here too our clamp does kind of fit into a little ridge on top of our CX9 system. So overall it just allows our roof rack system to have a really secure and custom fit to our CX9. Speaking about our system overall, our crossbars are 50 inches here which I think do sit really nice and flush here with our CX9. But I think if you did want to go up to the next size just to get some more usable space if you have a lot of accessories you wanna carry around or just want more easable access to something like rooftop cargo bags, that would be possible. The only thing is remember as you go farther and farther out from your vehicle the more dangerous it is kind of getting in and out making sure you don't hit your head. Now the install process for this roof rack system is pretty involved. It might be a little time consuming but as long as you're patient and follow the step-by-step guides in the instruction you might still find yourself running to a couple of snags. But thankfully we're gonna show you how that install process works right now. Now the first thing we're gonna need to do is set up our legs so they can go onto our crossbars. Now this is how it's going to come out of the kit. So the first step is going to be that we're going to need to remove this outer shell here revealing its inner one, and we're going to go ahead and take our flathead screwdriver and unlock this which just does expose all of the internals. We're going to need to take our included Yakima tool and unscrew this right here. And that will reveal secret door that we're gonna point out later. And then we're gonna go ahead and unscrew this a little bit ahead of time because this is where we are going to set up our clamps on. And then if we flip this over we can see that this by unscrewing that first bolt this is the little secret door that we have revealed that is going to be for the top of this guy right here. We are going to go ahead and take our plastic piece here, kind of just make sure that it's centered up with that and then drop in this piece which is going to be what secures our leg to its crossbar. You just kind of have to jiggle that into place holding it in place, flipping this around and then taking our included Yakima tool and tightening it down just a little bit so that way they become secured to each other but not enough that we can't fit it into our crossbar. Now that our legs are ready we can install them on our crossbar. Looking at our crossbar we have an arrow crossbar here today which means it's gonna be a little bit fatter in the front and kind of taper off towards the back. That's going to be the easiest way to tell you which way is the front and back. But we're gonna go ahead and flip it over. And we went ahead and marked an arrow facing towards the front, which really helps us whenever we have to install using this crossbar. So if you're looking for something to help you out that could be a good idea as well. Taking off our end caps here on both sides we are then going to go ahead and grab one of our legs and then we are going to use the included measuring strips on here that you may or may not be able to see. They're kind of difficult. And then we are going to go ahead and take our included leg here, slide that in. And our measurement is 38 and seven eighths. So we're gonna go ahead and find that on our strip and making that measurement line up with the back of our leg. And now we can go ahead and take our include Yakima tool and tighten them down a little bit but we don't wanna tighten them down all the way 'cause we still need to set the pitch. So taking a look at the leg of our crossbar system we can see the little bolt down here. So what the pitch basically means is we go ahead and push our tower towards the front of our crossbar. This is going to be the A positioning, B is going to be with it kind of sitting in towards the center. And C is going to be if we move the bolt towards the back. Now the measurement here and the pitch can be different depending on the system and your vehicle specifically. So make sure that you are checking which ones you are going to need. And this case we are going to need the C so we're gonna go ahead and take our included tool and tighten it down in this position. Now with our legs installed, we're going to go ahead and put our pieces in that make up our fit kit. The first one is going to be this pad here that actually has the same number regardless of of it's the front crossbar, the back crossbar, left or right. They all have the same code on them. We're going to go ahead and take it, making sure that our arrow is pointing out of our crossbar and come to about the middle of our crossbar here where we'll be able to see where it's going to just clamp right down into place. You'll hear a little click. That'll let you know that you did that right. (click) The next one we are going to do is going to be one of the sides of our clamp and we need to go ahead and take our fingers real quick and remove the retaining clip right here. And then this guy should just slide right in. (clanging) But you may find yourself needing to loosen it up a little bit with that same bolt that we did earlier if it's giving you a little bit of trouble. (clanging) There we go. And then we should be able to fit our piece around those hooks down there and then when we give it a good tug up you'll notice that it is in place and then we'll go ahead and replace that back in. Now if we come over to the front you'll see a very similar system that we just go ahead and pinch and we'll have go ahead and loosen that up. And for this we actually want to tighten this bolt back down because we are going to be fitting this between this hole right here, which means that if we don't tighten down this bolt that our clip is not going to be able to get past that. The process is going to be the same over on this side here. I did just wanna go ahead and point out that our clip here, R9, is going to be the one that sits inside our inner crossbar and our clip R14 is going to be the one that sits outside of our crossbar. which is designated in the instruction manual. Now that our crossbar is ready to go we're gonna have to know where to put it. So by taking a soft tape measure we're going to start at the front of our front crossbar. And since we already took measurement out of our construction manual we're gonna know that that's 28 inches. We're gonna go ahead and mark that. And then reaching over here to zero, we know that this is going to be where the front of our rear crossbar starts. Now your kit is going to come with some stickers to temporarily place here for you to mark that, but since we don't have those, I'm just gonna go ahead and make a little mark with my finger knowing that's where the spot is that I have to come back to. One nice thing about our crossbar system is that one of our clamps here has a little bit of a nub on it that will actually fit into one of the holes on our rail system. So that's just nice to know as kind of a secondary measurement that you know you're placing your rails in the correct spot. And try to line it up with your mark the best you can. But make sure that you go ahead and check the other side, make that measurement, and maybe double check your measurement over here after you move that side a little bit to make sure that you didn't accidentally move your first side. Now that we've checked the measurement for our crossbars on both sides and know they're in the correct place we can go ahead and tighten them down. Now if you are doing this by yourself, you wanna go ahead and choose one side and maybe only tighten it down about 50%, then go around to the other side and do that kind of back and forth increasing in value because if you do it completely on one side, you'll end up pulling your system all one way. And we don't want that. We want it to be evenly distributed. So we are gonna go ahead and just tighten this down a little bit, until maybe we can start to feel some of that resistance. And we'll know once we are at the correct setting because our included tool is actually a torque tool, which will not allow us to tighten down anymore once we are at that appropriate setting. Now that our roof rack system is in place we're gonna go ahead and put all our covers back. The first one is going to loop around this little point right here. And swing around. There you go. And once you have that in place, we're gonna go ahead and take our flathead screwdriver that we used earlier to lock that into place. So putting our final caps on, this one just fits right on the front, (snapping) and snaps right into place. And then do not forget the one on your crossbars. And then go ahead and make sure you do this for all four of 'em and then go hit the road. Now overall I do think our Yakima roof rack system looks pretty good on our 2022 Mazda CX9. Once it's up there, I think it looks very sleek and it'll help you carry around some of those additional accessories that you're wanting to. The installation process, like we said before, is pretty involved and can be tricky at times, but if it's something that you find yourself just setting up or getting on your roof and never having to take off, it's not that big of a deal that it's only gonna be that first time installation, really setting everything up that's kind of a pain in the butt. But once you get through all that I think that's a really good option for us. But that was a look today here at our Yakima Roof Rack System on our 2022 Mazda CX9. My name's Cooper and thanks for watching.
Customer Reviews
Yakima SightLine Roof Rack for Flush Rails - HD Crossbars - Aluminum - Black - Qty 2 - Y34PB
Average Customer Rating: 4.7 out of 5 stars (44 Customer Reviews)
Heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.by: Jonathan05/24/2024
Works well, after getting them in place. On my Kia Sorrento it's very tricky to get the towers to fit the holes in the factory rails -- takes a lot of loosening and readjusting the bars.
by: Anthony 08/29/2023
Great product, as are all Yakima products,in my opinion. These are on a Yakima system installed on my Diamond Back tonneau cover. Very pleased with them
by: Tim 10/18/2023
One quick phone call and Gwendolyn figured out exactly what I needed for our new car to use my old Yakima rack.
by: no such thing as free shipping06/27/2023
We purchased the rack 5 weeks in advance of our up and coming trip. (Rack is amazing FYI). However, The website states free shipping over a certain amount. Weeks went by with notifications nothing was sent and the order kept being pushed back.
Once I called I was told those who chose to purchase shipping vs opting for the free shipping got their orders firsts; everyone else fell to the bottom. After waiting a month for “free shipping” I opted to have paid shipping and I received the rack within days.
While this company has many products I could use, I refuse to use them again because what is advertised is NOT what they ethically hold themselves accountable too.
by: Robert 02/06/2024
My only complaint is the time it took to get my order. I understand this was out of your hands and dependent on supply problems.
by: Mark 04/22/2023
Toyota
While putting the roof racks together, one needs to pay close attention to the detailed instructions; but, so far, the equipment is working well with a good fit on my Toyota highlander—I’ve traveled some 1000 miles so far.
by: Dimitri02/01/2020
Yakima OverHaul HD is built tough, sturdy, light but heave duty, well designed, easy to install and remove by leaving the locking base on the track. The height can be adjusted easily to a desired height to fit just right. The "bonus" is a beer bottle opener on each rail :)
Customer service at etrailer is excellent! Always responsive, immediately reply to help with any questions. Tayler K. was my sales representative, she's been super!
by: Mark 01/11/2024
These REALLY need instructions! I can't imagine their function.
by: Adam K05/14/2023
Pretty straight forward installation. Instructions were easy to follow.
by: Blaine04/26/2021
Ford
Great product and even better was the service with etrailer! These guys make it happen and delivery was super fast. Thanks for a fantastic experience, will be a return customer.
Yakima HD bars 60”
2018 Ford Expedition
by: Robert07/13/2021
The Yakima products are doing great. Just got home yesterday from a 18 day trip using them in Michigan's upper peninsula. Love them. Great products. Thanks again.
by: Doug06/12/2022
These are some heavy duty crossbars.
Owned several surfboard racks in 45 years and these are by far the best.
Great tie downs also.
by: John 05/22/2023
Solid and well engineered product. Trevor provided excellent support and service in selecting and ordering to ensure the right solution.
by: Nicholas07/11/2023
Order was easy to place and delivered in less than a week as promised. The sales advice was perfect fit despite multiple pieces having been ordered. Used the rack once and very sturdy
by: Mark06/30/2023
Works as expected and feels solid
by: Jonathan04/25/2021
Toyota Highlander
They fit perfectlly and solidly on my 2021 Toyota Highlander. The instructions are clear and entirely accurate.
by: Puente Hills03/18/2020
It looks just as pictured :) Great product and superior service! William took the time to help us decide what we actually needed and would work for us. He is knowledgeable in regards to his products and has an overall helpful attitude. It was such a pleasure working with him.
Thanks again and buy William lunch today!!
p/s we have not installed the product yet so I will send a picture once its taken care of
by: Nicholas06/02/2020
Great customer service, definitely order from etrailer again.
by: David 02/07/2021
HD is no joke. These are bomb proof.... and t-slots full lengh. As a said in other feedback... my current set up has converted a life-long Thule fan.
by: Jason05/18/2022
Everything fit as expected. Nice to have a second person to help on the install. Well made piece of equipment.
by: Jonathan 08/18/2021
Got here fast, easy install.
by: George05/29/2024
by: Gabriel 01/19/2022
Carol was very helpful.
by: Milton01/28/2021
the right choice for a quality heavy duty rack, if ya gonna go bear go Grizzly!
by: Scott 05/20/2024
25
142
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Ladder Rack Compatibility on 2010 Toyota Tundra with Hard Tonneau Cover with Track SystemThe Rola Haul-Your-Might T3 Truck Bed Ladder Rack - Aluminum - 800 lbs # 59799 will fit on a 2010 Toyota Tundra without the tonneau cover in place but not with it installed. For a track system on a hard tonneau you can use the Yakima Overhaul HD Adjustable Truck Bed Rack # Y01151 which is compatible with the track rails. Then you can use the separate crossbars available in the following lengths: 55"--Y01156 60"--Y01157 68"--Y01158 78"--Y01159 The weight capacity on the rack will be...
view full answer... - Is the Yakima Aero Crossbar SmarT-Slot Kit 2 Compatible w/ Yakima HD Crossbars and the FatCat EVO 4Yes, the Aero Crossbar SmarT-Slot Kit 2 for Yakima FatCat Ski and Snowboard Carriers # Y03098 will work with Yakima HD Crossbars Aero Crossbars # Y01157 and the Yakima FatCat EVO4 # Y03095. The SmarT-slot kit is designed to mount your FatCat EVO 4 to T-slotted crossbars, the Yakima HD Crossbars are T-slotted crossbars so this is exactly what you need.
view full answer... - Will The Thule ProRide XT Roof Bike Rack # TH598004 Fit Yakima HD Crossbars? Yes, the Thule ProRide XT Roof Bike Rack # TH598004 will fit with the Yakima HD Crossbars # Y01157.
view full answer... - Roof Rack for Roof Tent on a 2019 Ford F-450 Super Duty Crew CabWhile there are no roof racks that have a weight capacity of 400 lbs, I still believe we have a solution for your 2019 Ford F-450 Super Duty Crew Cab with the Yakima HD roof rack. This consists of the HD Crossbars # Y01157, BaseLine Towers # Y28TR, HD Bar SL Adapter # Y03541, and Fit Kit # Y06185. If you are looking to use a tent that has a 400 lb weight capacity like the Yakima SkyRise HD # Y07436 then you actually just need to make sure that the roof rack is rated for 165 lbs like the...
view full answer... - Yakima Showdown on a 2021 Telluride With Flush RailsWe can get you setup so you can carry two kayaks on the roof of your vehicle. However, you will not be able to install two Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs - Side Loading - Clamp On, part # Y04081, on your vehicle. The crossbars of your vehicle cannot extend beyond the mirrors of your vehicle and with the length of the Yakima Showdown being just greater than 42", there is not a crossbar that accepts two Yakima Showdowns on the roof of your vehicle while...
view full answer... - Replacement EndCap for Yakima HD CrossbarsYes, we do have replacement end caps for the Yakima HD bars like the Yakima HD Crossbars # Y01157. The correct end cap is the Replacement EndCap for Yakima HD Crossbars # YA54FR, which comes with 1 end cap.
view full answer... - Can I Mount The Rhino-Rack Batwing To A Yakima HD CrossbarYou will not need a special mounting kit. The Rhino-Rack Batwing Awning - Roof Rack Mount - Bolt On - Passenger's Side - 118 Sq Ft, part # RR33200, mounts via the t-channels in crossbars. The Yakima HD Crossbars - Aluminum - Black - 60" Long - Qty 2, part # Y01157, have t-channels with the same dimensions of the Rhino-Rack Vortex crossbars. You will just need to make sure your crossbars extend beyond the Yakima tower. I have included a product description link and video review links below.
view full answer... - Will RhinoRack Batwing Awning Work with Yakima HD barsYes, the Rhino-Rack Batwing Awning Driver's Side # RR33100, or # RR33200 Passenger's Side are compatible with the Yakima HD Crossbars, like # Y01157. The Batwing uses the top channel on your Yakima bars to attach to them with the included hardware. Both the Yakima HD bars and the Rhino-Rack Vortex bars use a 7/16 inch wide top channel, so you'll just want to follow the same instructions as if you were mounting the awning on the Vortex bars. I've attached the complete installation instructions...
view full answer...
- Rooftop Capacity of a 2022 Subaru Outback WagonThe Yakima HD Crossbars - Aluminum - Black - 60" Long item # Y01157 have a 500 lbs weight limit.
view full answer... - Recommended Roof Rack for Drywall and Lumber on 2019 Chevy TahoeFor your 2019 Tahoe, I recommend the Yakima system consisting of: Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 SkyLine Towers # Y53TR HD Bar SL Adapters # Y03541 Landing Pad 17 # Y00243 I also recommend adding locks # Y07204 This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity.
view full answer... - Recommended Heavy Duty Roof Rack for a 2018 Ford FlexIt sounds like you might be looking for a roof rack for your 2018 Ford Flex that is both long and heavy duty. If that is the case then the best option for you is going to be dependent on your roof construction. If you have a bare roof then I recommend using the Yakima HD Crossbar System which is composed of part # Y01157, part # Y53TR, part # Y03541, and part # Y00233. If you have raised side rails then I also recommend the Yakima HD Crossbar System but this is composed of part # Y01157,...
view full answer... - Correct Size Yakima HD Crossbar for a 2016 Ford F-150The recommended size Yakima HD Crossbar for a 2016 Ford F-150 is 60", part # Y01157, this should provide around a 3-4" overhang which is standard. If you want to go with a longer option like 68" part # Y01158, you can do so but you'd have more overhang. This could be calculated for each bar size using the info above. In order to complete this setup you'll need the following; part # Y28TR, part # Y03541, and part # Y06122.
view full answer... - Weight Capacity of Yakima Roof Rack on 2019 Ford ExpeditionYou are correct that the TimberLine Towers # Y33TR limit your weight capacity over the Yakima Crossbars # Y01157, but in this case it is actually your vehicle's roof load capacity that is the real limit. Based on my research, a 2019 Ford Expedition has a roof load capacity of 125 lbs if you have a moonroof and/or 20 inch wheels, otherwise it has a roof load capacity of 200 lbs. Check your vehicle owner's manual to make sure. Since the weight capacity of your vehicle is lower than the capacity...
view full answer... - Parts Needed to Install Yakima HD Crossbar Roof Rack in Camper Shell TracksI have a solution for you but Thule Podium feet can't be used with any Yakima crossbars. What you would need to install Yakima HD bars in the tracks you have are the following: x2 Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR x4 Replacement SkyLine Tower for Yakima Crossbars - Qty 1 # 8880614 x1 Yakima HD Crossbars QTY 2 part # Y01158
view full answer... - Does Thule Hullavator Fit Yakima HD Crossbars Using T-SlotsYes, you can absolutely mount your Thule Hullavator Pro Kayak Carrier # TH898 into the T-slot channels of the Yakima HD crossbars. The HD crossbars are available in the following sizes: - 55" Long: Yakima HD Crossbars # Y01156 - 60" Long: Yakima HD Crossbars # Y01157 - 68" Long: Yakima HD Crossbars # Y01158 - 78" Long: Yakima HD Crossbars # Y01159
view full answer... - What HD Crossbars Can I Use to Mount an Awning on Rhino-Rack Tracks? I have a crossbar solution for you. Unfortunately, Yakima HD Crossbars like the # Y01157 have no way of attaching to Rhino-Rack tracks like the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 50" Long # RRRTV128. However, we do have another option for installing HD bars on Rhino-Rack tracks. For that route, I recommend the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 59" Long # RB1500 along with the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack...
view full answer... - Roof Rack for 2015 Toyota Tacoma Double Cab and Roof Rack for a Camper ShellI would be happy to help you find roof racks for both your 2015 Toyota Tacoma Double Cab and your camper shell. I'll start out with the roof rack for your truck. It is the 2015 Toyota Tacoma Roof Rack by Yakima. These 60" wide heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. The top and bottom channels let you add channel-mount accessories. The tie-down points in the endcaps let you easily secure cargo. I have linked a picture of this roof rack installed as...
view full answer...
- Recommended Roof Rack For 2018 Jeep Grand Cherokee With Matte Black Factory Roof RailsThe Thule and Inno roof racks for your 2018 Jeep Grand Cherokee are for if you have black and chrome roof rails running front to back. Since you have the matte black rails running front to back then you will want to look into a different setup. I would look into the Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver - 54" Long - Qty 2 # RRVA137S-2. You will also need # RRRLKVA and # DK234 to use this roof rack. This also has a weight capacity of 165lbs and has the top track for channel-mounted...
view full answer... - Yakima Roof Rack for 2023 Subaru Outback With Thule HullavatorsHi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
view full answer... - Weight Capacity of the Yakima HD CrossbarsThe Yakima HD Crossbar Set, part # Y01157, have a weight capacity of 500 lbs in conjunction (i.e. the two of them together can hold 500 lbs). The reason the single bar, part # YA34FR, states that its weight capacity is 500 lbs because these bars are intended to be used as a set (either with the same one or with another HD bar of a different length). Even with just the 500 lbs, this number is more than likely much higher than you can put on the top of your vehicle. Though these crossbars...
view full answer... - Compatibility of Rhino-Rack Cargo Basket RMCB02 with Yakima HD CrossbarsThe Yakima HD Crossbars like # Y01157 will allow you to use the Rhino-Rack Roof Mounted Steel Cargo Basket - 57" Long x 42" Wide - 165 lbs # RMCB02 if you use longer screws as you referenced as the width of the crossbar will work with the mount, but the depth is 1/4 inches too large for the factory hardware to fit.
view full answer... - Are Yakima HD and Corebar Roof Racks Overkill for 2018 Ford F-150I understand exactly what you are asking about. So with anything where there's a weight capacity involved (roof rack, towing, etc.) you are limited by the lowest rated component in the setup as the overall weight capacity. So if your roof capacity is 165 lbs the CoreBar rack part # Y00422, # Y28TR, and # Y06122 would give you the full capacity plus some and the HD Bar rack part numbers # Y01157, # Y28TR, # Y03541, and # Y06122 would be even more.
view full answer... - Which Bars Do I Need For Yakima BedRock HD Towers for Truck Bed Rails The Yakima BedRock HD Towers part # Y01160 for Truck Bed Rails will only work with the Yakima HD crossbars part # Y01156 for 55" part # Y01157 for 60" and part # Y01158 for 68" bars so the Thule Xsporter bars would not be compatible.
view full answer... - Can Thule Hullavator Fit on Yakima HD Roof Rack that Fits 2020 Subaru AscentThe Yakima HD bars do have a channel on the top of them that a Thule Hullavator part # TH898 could easily attach to. There's a cover that's on them which is designed to lower wind noise but that easily comes off and is trimmable. So for a Yakima HD roof rack that fits your 2020 Subaru Ascent with raised rails you'd just need the part numbers # Y01157, # Y03541, and # Y33TR with the Hullavator and you'd be set.
view full answer... - Will Roof Rack Work with a 2020 BMW X3 with a SunroofIf Thule warns against using the Thule AeroBlade Edge Roof Rack on your 2020 BMW X3 with a sunroof, then I will second them. Instead, I recommend going with a system that has been shown to work with your sunroof. It's the Yakima Roof Rack. The crossbars are the JetStream Crossbars, part # Y00425. The towers are the SightLine Towers, part # Y64AR. The fit clip is part # Y62CR.
view full answer... - Availability Of Trailer Hitch For 2023 Kia Soul GT-Line With Center ExhaustIf you need to carry cargo with your Kia Soul, I do have a few potential solutions for you. I will tell you there is not a trailer hitch available anywhere that will fit the center exhaust model at this time (July 2023). The receiver would go exactly where the exhaust sits and there is no way to work around that. If your goal was to carry a few bikes we could set you up with a trunk mount bike rack like the Malone hanger # MPG2139. This can carry 3 bikes weighing up to 33 lbs apiece and...
view full answer... - Roof Rack Recommendation for a 2020 Porsche Macan With a SunroofI am partial to the Yakima roof rack. It has extra adjustments that the other rack companies do not have to provide a better fit for your vehicle. This Yakima rack will allow you to open your sunroof provided the roof rack accessories do not interfere with its operation. The rack for your 2020 Porsche Macan will consist of the following: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2, part # Y00426, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip...
view full answer...
- Roof Rack for a 2019 Hyundai Tucson to Carry a CanoeThe roof rack that I recommend for your 2019 Hyundai Tucson is the 2019 Hyundai Tucson Roof Rack by Yakima. This rack is made up of the following parts and will fit whether you have the Panoramic Sunroof or not. - Yakima JetStream Crossbars # Y00425 - SightLine Towers for Yakima Crossbars # Y64AR - SightClip Fit Kit for Yakima SightLine Roof Rack Towers # Y47AR You can then secure the rack to your roof using the Yakima Same Key System (SKS) Lock Cores # Y07204. This will provide you...
view full answer... - Roof Rack Recommendation for 2017 Ford Edge with Panoramic SunroofWe have a variety of roof rack options that fit your 2017 Ford Edge with the glass roof but I really like the Yakima JetStream system because it's fine-tuned to fit your vehicle like a glove and keep the crossbars level with each other. The correct parts will depend on if you have the flush rails or a naked roof. Flush Rails 50" JetStream Crossbars - # Y00425 SightLine Towers - # Y64AR SightClip Fit Kit - # Y79AR Naked Roof 60" JetStream Crossbars - # Y00426 BaseLine Towers - # Y28TR BaseClip...
view full answer...
- Can I Open Trunk of 2020 Volvo XC90 With Thule Force XT Rooftop Box?While we haven't test fit the Thule Force XT XL Rooftop Box # TH6358B on a 2020 Volvo XC90, I believe it will fit based off the measurements of your vehicle. You can measure yourself to make sure too if you like. Let's use the Yakima Roof Rack System fitted for your vehicle with parts # Y00425, # Y64AR, # Y67AR. When the bars are mounted to the fixed points on your roof, there is a distance of 58" from your front bar to your hatch. The hatch clearance required is only 51-1/8" so based...
view full answer... - Does Thule Force XT XL Rooftop Cargo Box Fit Yakima Roof Rack on 2023 Acura MDXYes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails. Bare Roof - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06163...
view full answer... - Height of JetStream Roof Rack and LockNLoad Platform on a 2024 Kia Telluride with Flush RailsThe Yakima JetStream roof rack will add about 4-1/2" to the height of your 2024 Kia Telluride, and then the Yakima LockNLoad # Y05045-39 sits about 2-3/4" tall so you're looking at 7-1/4" overall. Here are the parts you need to accomplish this: JetStream Roof Rack - 50" JetStream Crossbars # Y00425 - SightLine Towers # Y64AR - SightClip Fit Kit # Y34UR - Lock Core Kit # Y07204 (optional) - 60" x 54" Yakima LockNLoad # Y05045-39
view full answer... - How to Transport 3 Bikes 1 E-Bike with a 2018 Subaru Outback WagonI do have a recommendation for you, but with your specific bike rack needs you don't be able to use your 1-1/4" trailer hitch on your 2018 Subaru Outback Wagon to carry all 3 bikes. Either the bike rack is way too heavy and requires a 2" receiver, like the Draw-Tite # 76227, or it doesn't have the attachment option you need, plus the weight capacity for your heavier bike. For your application you'll need to use a hitch bike rack and a roof mounted bike rack. The hitch mount bike rack I...
view full answer... - Yakima Roundbar Roof Rack For 2018 Subaru Outback TouringYakima does have a round bar roof rack that fits your 2018 Subaru Outback Touring; the correct bar size is the 48 inch bars part # Y00408. The towers you'd need are the SightLine # Y64AR, with round bar adapter # Y03536, and Fit Kit # Y32CR.
view full answer... - Aero Bar Roof Rack that Fits 2023 Kia Niro PHEVI have a roof rack solution that does fit your 2023 Kia Niro with flush bars but the Malone racks require a raised rail like you mentioned so it would not work. Instead you'd need a rack designed to attach to the flush rails like with the Yakima CoreBar roof rack part numbers # Y00421, # Y64AR, and # Y27AR which is a similar aero shaped crossbar to the Malone.
view full answer... - Roof Rack System for Thule Hullavator Pro Load Assist Kayak CarrierBoth the Thule Hullavator # TH898 and the Yakima ShowDown # Y04081 are great kayak carriers but I prefer the Hullavator. Regardless of age, after a day of paddling the lift assist is awesome when it comes to helping you load your boat on top of your roof. You do need 4"-8" of overhang on your roof rack for this carrier to work. Your current roof rack on your 2010 Infiniti QX56 will not work. The only confirmed fit for your vehicle is a Thule Roof Rack system like Thule WingBar Evo Crossbars...
view full answer... - Kayak Carrier Recommendation for Hobie Mirage Compass Fishing KayakSince your Hobie Mirage Compass fishing kayak weighs 87 lbs you're either going to have to use a post-style carrier like the Yakima BigStack # Y04041 or use 2 sets of a J-Style carrier like the etrailer J-Style Kayak Carrier # e98878. I recommend going with 2 of the J-Styles simply because it will be easier to load an individual kayak on each one, especially with your heavier kayak. If you don't already have a roof rack then I recommend using a Yakima CoreBar roof rack. The correct parts...
view full answer... - 2017 Hyundai Tucson Heavy Duty Roof Rack RecommendationThank you for all of the info! I definitely have a roof rack solution so you can carry some ladders with your 2017 Hyundai Tucson but at this time (February 2022) Rhino-Rack doesn't have a roof rack fitment for your Tucson so we won't be able to install a roof rack using the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1250. As an alternative option I recommend going with the Yakima HD Crossbar roof rack system. The crossbars won't increase the weight capacity of the roof rack since your...
view full answer... - Yakima SightClip Fit Kit for Yakima Roof Rack on 2018 Lexus NX 300We have the Yakima SightClip Fit Kit # Y59AR which is the correct fit kit for your 2018 Lexus NX 300 with flush mounted rails. The rest of the parts needed are the Jetstream Crossbars # Y00425 and Towers # Y64AR.
view full answer... - Recommended Roof Rack for 2017 Ford Edge with Panoramic Sunroof and Flush Side RailsFor the best appearance, low-noise and long-term durability I recommend an aluminum aero-style roof rack. This type will be lighter than a steel bar rack, naturally non-corrosive and quieter in operation; and for this, I highly recommend going with Yakima for overall durability, noise reduction and ease of use. The Yakima rack that fits your 2017 Ford Edge with panoramic glass and flush side rails consists of parts # Y00428, # Y79AR, and # Y64AR.
view full answer... - Roof Rack Recommendation for a 2020 Kia Telluride with Factory RailsWhen Thule discontinued the old square bars, they unfortunately stopped manufacturing the compatible roof rack feet, so there won't be a Thule fit kit that would be compatible with the vehicle and your Telluride. At present, Yakima is the only manufacturer offering a roof rack fit for the 2020 Kia Telluride. The kit you'll need will depend on whether your vehicle has the side rails that run along the edge of the roof, front to back. For the raised side rails, you can assemble a rack using...
view full answer... - Best Way to Carry Two Kayaks on 2019 Mazda CX-5 With Flush Side RailsWe do have a solution for you, but for your 2019 Mazda CX-5, the issue isn't only actually the weight capacity of the roof, it is that there is no way to fit a combination of the Thule Hullavator Pro Kayak Carrier # TH898 with the Yakima ShowDown Kayak Carrier # Y04081 (or two of either carrier) on any roof rack for your 2019 CX-5 because they take up far too much space on your crossbars. Additionally, there isn't enough space on roof rack crossbars for a '19 CX-5 to fit both a Hullavator/ShowDown...
view full answer...
- Roof Rack Recommendation for 2021 Acura RDX with Flush Factory RailsWhile the search bar is a great way to look up different products, if you're wanting something designed to fit your 2021 Acura RDX with the factory raised rails it's best to use our fitguide system to sort through the vast amount of choices. The Thule AeroBlade Edge Crossbar TH7602B is not a fit for your vehicle but since you have the factory flush rails I recommend using the Yakima JetStream roof rack which consists of the following: 50" JetStream Crossbars - # Y00425 SightLine Towers...
view full answer... - How is Plastic Lock Core of Yakima Sightline Foot Accessed to Install SKS LockThe lock core location for the Sightline feet part # Y64AR is underneath the cover of the foot. So you'd just need to pull the cover off (no tools required) and then underneath it you would see the plastic core that you can remove with a flat screwdriver so that you can install new cores with the part # Y07204.
view full answer... - Recommended Roof Rack for a 2024 Hyundai Tucson w/ Flush Mounted Roof Rails Congrats on the new SUV! Yes, there is a way to install a roof rack on your 2024 Hyundai Tucson with rails even though it has the panoramic sunroof. I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system...
view full answer... - Parts Needed to Add a Yakima Jetstream Roof Rack to a 2024 Cadillac Escalade w/ Roof Rails I would be happy to! To install a Yakima roof rack to the rails on your 2024 Cadillac Escalade you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to...
view full answer... - Recommended Roof Rack for a 2023 Mazda CX-50I have a great roof rack for your 2023 Mazda CX-50 but we have not had a chance to install it on a vehicle yet because they're so new. We have installed the rack I am recommending on other Mazda's with the flush mounted rails and they stick up right at 5" from the top of the rail to the bottom of the crossbar. I do not see you having any compatibility issues but I recommend taking some measurements of your sun roof open to confirm. To mount a roof rack to the flush mounted rails on your...
view full answer... - Best Roof Rack For 2021 Mazda CX-5 With Flush Side Rails For Rooftop TentHey Dillon, thanks for the nice words, they are definitely appreciated, and we can get your 2021 Mazda CX-5 with flush rails set up with a roof rack for a rooftop tent. Starting with your question about Thule, they discontinued that fit kit so I'm not quite sure why they still have it listed. So the best option for your CX-5 is 100 percent the Yakima. You mentioned Inno, and of course price is always a factor, but honestly I just would not use them on my roof for a rooftop tent. Carrying...
view full answer... - Parts Needed to Add a Yakima Jetstream Roof Rack to a 2024 Cadillac Escalade w/ Roof Rails I would be happy to! To install a Yakima roof rack to the rails on your 2024 Cadillac Escalade you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to...
view full answer... - Recommended Roof Rack for a 2022 GMC Yukon XLYes, we do. The best roof rack for your 2022 GMC Yukon XL is going to be the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV This roof rack will attach directly to your Yukon's flush side rails. It has a 165 lbs capacity. I have linked an...
view full answer...
- Yakima HD Roof Rack and LockNLoad Fitment on a 2021 GMC Yukon AT4The parts you need to build a Yakima HD roof rack kit for the flush rails on your 2021 GMC Yukon AT4 includes the following parts: 60" HD Crossbars - # Y01157 HD Bar SL Adapter - # Y03541 SightLine Towers - # Y64AR SightClip Fit Kit - # Y44UV Lock Core Kit - # Y07204 (optional) This will work great with the Yakima LockNLoad Platform Rack for Crossbars # Y45UV, but we still need to talk about the weight ratings as you do bring up a great point. The Yakima HD bars are actually rated for...
view full answer... - Platform Roof Rack Available For a 2022 GMC Yukon XL DenaliRyan, currently I do not see that Rhino-Rack has any options for your 2022 GMC Yukon XL Denali. We do have the Yakima HD Crossbars # Y01157, Towers # Y64AR and Fit Kit # Y44UV which would allow you to use the LockNLoad Platform Rack # Y45UV.
view full answer... - Recommended Roof Rack for a 2023 GMC Yukon XLTo add a roof rack to your 2023 GMC Yukon XL, you will want the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 Black or item # Y00429 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV I have attached a couple of pictures below that will show you what this roof rack looks like and how to...
view full answer...
- Yakima Round Bar Roof Rack for 2023 Chevy TahoeI checked with Yakima and their 58 inch round bar roof rack part numbers # Y00409, # Y00145, # Y03536, # Y44UV is a fit for your 2023 Chevy Tahoe with he factory rack so this would give you what you are looking for.
view full answer... - Will Rhino-Rack Bars Transfer to 2023 Cadillac Escalade For Roof RackRoof rack parts from different manufacturers do not mix and match so the T-slot sizing from your Ford F-150's Rhino-Rack # RRVA180B-RRRLT600 crossbars won't work for your 2023 Cadillac Escalade. If you wanted to put a roof rack on your Escalade you could do so with a Yakima rack consisting of parts # Y00426, # Y64AR, and # Y44UV. Conversely, if you wanted to switch to Yakima HD bars for your 2016 Ford F-150 with a Retrax XR tonneau cover you can still do so but you'd need a new system...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.