To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
Features:
Rhino-Rack Vortex Aero Crossbars - Silver - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, Aidan here with etrailer.com. Today we're gonna be taking a look at the Rhino-Rack Vortex Aero Bar crossbar system here for your tonneau covers. We're gonna be taking a look at it on our 2019 Ram 1500 with our Mountain Top tonneau cover. Now we are going to be using this with the rails here. Any other tonneau cover that has a rail system like the Pace Edwards UltraGroove or the RetraxPRO XR, those are gonna work just fine. Same deal, it's just gonna slide in the tracks here, but it's basically going to give you a set of crossbars above the tonneau cover.
This is gonna be great for stuff like our tent like you see here, or maybe a bike rack, where we want it above the bed, we want it raised up like this, but we don't wanna reach all the way up like we would on something like a ladder rack. This is gonna have it way more accessible and offer all those same benefits that we might otherwise have at the ladder rack. Let's check it out. When I say all those same benefits as a ladder rack, I more mean for hauling your sports and rec accessories. Things like lumber, ladders, elongated loads maybe like a kayak, they're not gonna work really well on here just because we don't have that same space over the cab.
Anything elongated here is gonna eventually run into that back glass so just keep that in mind for what you're hauling. If you need something that's adjustable, Yakima does have the overhaul system that can be height adjusted, so you can mix and match it for different uses, but this is going to be more of a fixed system, low to the bed like this. And you also have a couple different options here. We're taking a look at the kits here that include the Vortex Aero Bars as well as the quick release legs. We can get these crossbars in two different lengths.
65 inch, like we have here, or a 71 inch crossbar, if we want a little more overhang. You can also choose to just get the quick release feat on their own. You can get them in pack of two, four, or six, so you can mix and match, get as many as you want. If you want to add a third crossbar to this system, you can. And then you can choose whatever crossbar you want.
Maybe you wanna go with Rhino-Rack's HD bars. You have that option and you can customize it to fit your needs. With whatever tonneau cover we're using this on, it's going to retain all of those normal functions, we just have something in the rails on top. So anything we wanna put in the bed, we can. We can open up the cover to get access to the things inside our bed, or we can just slide it out, have everything covered up underneath and have it all protected. These crossbars are gonna have a 220 pound weight capacity and that is a dynamic weight capacity, which means when the vehicle's moving. So if you do plan on putting a tent up here, don't worry you can still sleep in it. It'll be just fine because at that point your car will be static and still. So we don't have to worry about that moving weight capacity. These Vortex Aero bars are perfect for clamp around accessories. They're a very standard size and we haven't had any issues with the accessories we keep in the shop down here, or that we test on other vehicles fitting on these. And you also have the T-track up top. If you peel back the weather stripping and trim it to size, you can slide accessories in there as well. So you've got a variety of options for how you want to attach these accessories to the cross bars. Everything in the system is gonna lock. The end caps on our cross bars here require a special tool to twist open and unlock. So any T-track accessories inside will be safe. And the quick release legs have an actual lock core with key. All of them will have that lock core and key. So all these tabs inside are gonna be completely locked up and safe. So I'm not gonna fully release this with the tent on top, but if you push those tabs in, that's what allows us to lift this out of the quick release mounts right here. So we can quickly get the crossbars off of those bases, leave the bases installed, and it's ready for next time whenever we need to get this set up. I did mention everything is pretty low profile. From the top of our tonneau cover rails to the top of the crossbars, we're sitting at 4 3/4 of an inch. Very low profile. It's gonna not stick up too much. So if we are adding stuff to the top here, it's not gonna be that high of a lift. The tracks run the entire length of the rails on our tonneau cover here, so we can slide the bases here along any point and have any crossbar spread that we might need. We set these up specifically to work with our rooftop tent today, but maybe you have some bike racks that you're looking to carry or a cargo basket, and you know, I need a different crossbar spread. You can set that up, move it around however you see fit, and get it set up really quickly. Speaking of that setup, let's check out that install process right now. Starting off the installation, we're gonna take the base of our legs and we're gonna get some stuff assembled. We're gonna start off with our screw right there, a lock washer and a flat washer on top of that. And that's gonna drop through one of these outer holes right here, just like that on either side. Then underneath, I'm gonna grab the little plate loosely thread that on. And this is going to slide into the rails of our tonneau cover, or wherever else we're mounting this. For our Mountain Top tonneau cover today, we're gonna take off the end cap right there to expose the track system. And these T-bolts are rectangular, so just make sure they're going in the narrow side facing inward just so they fit properly. And depending on the system you're using it might be a little bit different on yours. So you get those in. This one's being a little stubborn. If you find that it's getting a little bound up entering in, you can just loosen it a little bit. That's why we wanted to leave this loose from the start. So it can freely slide along the track. And we can get it set to our crossbar spread. That's gonna vary depending on what kind of accessories you plan on mounting. We're gonna be putting a tent up here, so I'm gonna be shooting for a 32 inch crossbar spread to work with our tent. So I'm just gonna be going from the center of one base to the center of the other. And once I've got it at that proper spread, I can go back to those bolts and tighten them down with the Allen wrench here. We can take our crossbars with the rest of our leg assembly and get those set up. We can take our key for our Aero bars here and pop that end cap off. Now if you went with the HD bars, that process will be slightly different. so just keep that in mind. We're gonna slide this little T-bolt into the track underneath. I'm just gonna pop on the end cap right now so I don't forget. And so, this doesn't slide out of the track accidentally. And then what I like to do is I actually like to come to the bolt underneath here. Right there, you can get a better look at it, and I'm actually going to tighten it up most of the way. Now the reason I'm doing this is so it's easier on us whenever getting it set up and spreading these out the appropriate amount. So I'm just gonna tighten it up, enough to where it won't move on its own, but I can still move it by hand pushing it with a little bit of force. This right here is perfect. One thing I'm gonna also do is push these locking tabs in and just push them into the leg there. That way they're just unlocked, ready to go, and drop into the bases. With those bases tighten down, everything should be good spacing wise from the front to the back. And now we just have to worry about our side to side. We can see everything locks in pretty well here. I can come to the back of the truck and get kind of a basic idea of how that crossbar spread is looking, or I can even get a little bit more precise and measure the overhang on either side make sure it's even. Once we're happy with the even overhang on both sides, we can just lift it out. Since we left it unlocked, it's easy to do. And since everything's mostly tight, these aren't gonna shift around on us. We can then take this opportunity to fully tighten them down. And at this point, everything should be lined up and tighten down. So it's as simple as dropping it back in and pulling out on those red locking tabs. Verify that they're all engaged. We don't want to forget to cover up the legs, lock them up. And then on our Mountain Top cover, install these caps on our rails. Get that lined up here. Lock up those legs just like that. That's gonna secure everything. And for our Mountain Top cover we can slide on those end caps to the rails, and everything's ready for our accessories. With our gear installed up top, we can close up our tonneau cover, get that latched in on both sides and we're good to go. And overall, I think this is going to be a very versatile system. The quick release legs are great because we can take them off really easily, put them on just as easily. We don't have to make any adjustments once it's all set. And the overall crossbar system is gonna be great for things like our tent here or for a bike rack. We don't have to lift it up all the way like we would on a ladder rack. It's just at a much more accessible height, while still leaving the whole bed and the tonneau cover open to use as we normally would. Thanks for watching..
Average Customer Rating: 4.8 out of 5 stars (99 Customer Reviews)
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.Wow! It's a real well made and engineered product and was delivered fast. I got it so I could remove it due to garage door clearance... It is heavy duty enough to carry our boat and 2 kayaks. The key lock, pivot system and removal system were well thought out and so easy.
I was building a rack for the skin on frame sailboat I built. I needed a crossbar on the top of my truck but the tracks were longer than I needed. I ended up cutting one of the tracks in half and redrilling the holes for the end caps on the cut ends. It was a little difficult to bend the track along the curved profile of my 2019 Ram Classic roof and get the holes where I needed. It says not to use a pop riveter but I didn't have a pneumatic one and have very good grip strength. I needed every bit of my grip strength in both hands to make it work but it did, in fact work. I used tape to cover the track around the rivets and prevent scratches because when the rivets pop, it's a little out of control. Overall it turned out well. I ended up machining a custom crossbar and T nuts due to having a machine shop on my garage.
I like the Rhino Rack RTV track because is allows Vortex Aero cross bars to be easily moved and removed. However the appropriately sized rectangular track nuts (M6 24x21x5 part No. N057) used to mount items to the rack are no longer available or manufactured. Consequently RTV track cannot be easily used to secure additional items. Rhino Rack is unable to offer a solution other than returning the wrong sized track nuts so I will manufacture my own attachment nuts. After drilling 18 holes in the roof of my new car and installing the RTV track and cross bars, the lack of compatible nuts was a big disappointment. The product should not be sold if components are not available.
Works awesome and was the best solution for carrying bicycles while towing travel trailer
Really has come in handy as I installed this over my truck bed on top of a retractable bed cover that came with T -tracks. I can load the truck bed with smaller items and use the roof racks to hold a Thule box or just strap on heavy and larger items. Great product.
great product. sturdy easy to install and held my thule cargo box (also an etrailer purchase), really well! Fit perfest in my 2002 Excursion roof rack factory rails and easily adjusted. One note for excursion owners is to mount the front leg of the rack more directly over the rear door vs moving it up towards the front. I was tempted to move it as far forward as I could so I could stand in the rear door opening to access the inside/contents of the box and the weight of the box and contents actually bowed the roof steel in and out while driving, causing a popping noise, once i moved it back a little it was fine. Also making note that I have one of the biggest boxes you can buy so weight was at a max for the roof/roof rack for me YMMV depending on what you have on top of the crossbars. overall good solid product and the cost savings for the Rhino rack vs other brands is a BIG plus for me.
I think these look better than the OEM rack that I ended up installing...however, using them would have required drilling my roof and putting rivets in. I went to 3 shops that refused to do so because they didn't want to be responsible for any leaks.
Strong, looks great, and super easy to remove & re-install cross rails.
I love the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars. At first they were a pain to crossbar on, but they I used my thumbs correctly on the lock, and haven't had an issue since the first alignment. They really served their purpose and lifted the old Sears Sport 20-SV cargo top carrier off of the roof for easier mounting and for now hold the kayaks. I do need longer crossbars, but that's a future problem that etrailer.com will be glad to provide a solution to.
Purchased the Rhino Quick Mount Legs and Vortex-Aero bars, to mount on our Retrax XR Pro Tonneau cover. As always buying from trailer is easy, Terri N make the experience much better, from order to delivery. Terri ensured compatibility with existing hardware, and that everything needed is included.
The Rhino system is an easy install, the fit of the T-slot plate style nuts was tight, eliminating the damage that can occur with loose fitting slot inserts. Assembly can be completed on or off vehicle, as long as all accessories are fitted first. If done off vehicle, accurate measurements will be needed for the base fitment.
We paired the Rhino system with 1up USA bike racks, and a Yakima box.
These are excellent! Check out my YouTube channel, Road and Reel, to see how I used the to carry 4 bikes above my Retrax Tonneau cover.
I bought these racks for my Ford Transit and I couldn't be happier with the racks or the service from trailer. The rhino racks added a nice touch to an awkward looking van with its great looks and perfect functionality. Reading reviews about other racks making howling noises while driving made me a little hesitant , but am pleased to say, no noise whatsoever. I've added a basket to the racks and everything has worked perfectly. We do a lot of traveling,(2 adults,4 kids, 3 dogs) and the racks have provided exactly what we needed. Thanks etrailer for the best price and great service
good price and prompt delivery
I purchased a used gray topper for my Tundra, repainted it to match my truck, and purchased from you the mounts and rails to put on top of it. The entire project was GREAT, and the and rails have just topped it off (see what I did there?) with a great look and very functional utility to add some long storage capability to a very short-bed truck. Thank you so much, it was expensive, but the quality is fantastic and the look is very sharp!
2022 Ford Maverick with a Rhino Rack on a retrax xr tonneau...love em both. THANKS etrailer.
Durable and quiet
Very nice crossbars. Paired with matching RLT600 legs, it sits nicely on my Roll-n-lock bed cover
Quick shipping, but cross bars came bend .
Awesome customer service! Professional people. Ill be honest, sent incomplete product first time. Made a phone call, took care of me. Carol C, hands down only reason I will continue to purchase from etrailer. Been a customer for years, work in customer service myself, so feel real good when someone can fix and make happy there customers!
Great racks. Just used to mount our car top carrier and traveled 10,751 across the US and back. Speeds were often at 75 mph + and rack performed flawlessly.
The entire rack system (tracks, feet, aero crossbars, ladder straps, and load stops) installed and worked great for the intended use. Also, the service from etrailer was excellent.
The only drawback to this system is the necessity of purchasing a pneumatic rivet gun ($40) for mounting the tracks, but hey, it's a custom rack and i ended up with a cool tool.
Thanks.
Very nice. Purchased these crossbars and associated parts to attach to an ARE cap on a 2015 Tacoma. Looks great, fits well (had to file track nuts a bit to fit into the pre-installed tracks on the cap), but all in all very pleased with the results. etrailer staff very helpful in lining up the necessary parts.
I have been happy with previous orders from etrailer. I called with questions about the Rhino-Rack which assured me that if it didn't fit my existing tracks they could easily be returned. The Rhino-Rack legs were a perfect fit and the product arrived within a couple of days of the order. Easy to install
These assembled easily and are much stronger than the factory system on my 2004 Chevy Trailblazer. I had a little bit of a problem trying to seat the pins in the saddles but other than that these are very secure.
The instructions tell you to slide the large hex nuts into your roof rail tracks and then assemble the rack leg base to the nuts. This is fairly difficult to do as the bolts were not long enough to reach the nuts resting in the tracks and you can't get your fingers in there to lift them. It was much easier to assemble the complete track leg bases with the Hex nuts installed loose then slide them onto the tracks and into position.
If your tracks are elevated off your roof at all you will find that these bases make any bars you add much higher than your OEM roof rack, the bars are probably 3 inches higher than my OEM bars although this is not an issue for me it may be something you may want to consider.
I had a hard time finding mounts for the original side rails for my trailblazer and had to pay more for the Rhino Racks but the quality is there.
The Vortex Crossbars slide right on to these with no issues.
One tip; have a step ladder on each side of the vehicle because you will be going back and forth to each side as you install these.
couldn't be more pleased with the Rhino vortex rack for my 2018 toyota tacoma. Fit/finish excellent and not hard to install. Install video and directions made it easy. The etrailer customer service rep who helped me was outstanding and ensured i had the right rack, feet and mounts for my truck. The package arrived quicker than i expected.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.