Custom Fit Roof Rack Kit With INB147 | INK766 | INSUT
(284 reviews)
Price: $359.97
Custom Fit Roof Rack Kit With INB147 | INK766 | INSUT
Item # IN75TR
Our Price: $359.97
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (284)
- Q & A (0)
- Videos (11)
- Photos
Inno Roof Rack - IN75TR
- Square Bars
- Crossbars
- 58 Inch Bar Space
- Inno
- Black
- Overhang
- 2 Bars
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Inno Square Load Bars - Black - 58" Long:- Square crossbars let you build a roof rack for your vehicle
- Pair with Inno feet and custom fit kit to create a complete roof rack
- Standard square bars provide exceptional load support
- Clamp-on carriers and accessories conveniently wrap around bars
- Elastomer coating helps to prevent rust and cushion your load
- Endcaps keep out dirt and water
- Hardened steel construction is strong and durable
- Black color
Inno Custom Fit for XS200, XS250, and INSU-K5 Roof Rack Feet:
- Custom-fit clamps and pads let you install Inno roof rack feet on your vehicle with a naked roof
- Works with XS200, XS250, or INSU-K5 feet
- Pairs with 4 feet and 2 crossbars to create a complete roof rack
- Clamps are designed specifically to fit the curves of your doorjambs
- Mount to roof rack feet with bolts
- Molded pads are custom designed to fit the contours of your roof
- Protect your roof surface from scratches and abrasions
- Press onto the bottoms of your roof rack feet
Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4:
- 4 Feet let you mount Inno square crossbars on your vehicle's naked roof
- Pair with 2 crossbars and a custom fit kit (sold separately) to create a complete roof rack
- Bases pivot to ensure crossbars are level on your roof
- Locking torque knobs secure system to your roof
- 2 Keys included
- Durable, weather-resistant AES plastic construction
- Tool-free installation and removal - no drilling required
- Torque knobs prevent over- and under-tightening
- Black color
Specs:
Inno Square Load Bars - Black - 58" Long:- Quantity: 2 crossbars
- Weight capacity: 220 lbs
- Always observe your vehicle's maximum roof load capacity
- Dimensions: 58" long x 7/8" tall x 1-1/4" wide
- Limited lifetime warranty
Inno Custom Fit for XS200, XS250, and INSU-K5 Roof Rack Feet:
- Quantity: 4 clamps and pads
- Limited lifetime warranty
- Stay height: 3-7/8"
- Weight capacity: 132 lbs
- Always observe your vehicle's maximum roof load capacity
- Limited lifetime warranty
IN-B147 Inno Standard Square Steel Load Bars - 58" Long - Black
K766 Inno Fit Kit Hooks for Flush, Through, and INSU-K5 Stays
IN-SUT Inno Roof Rack Stays for Bare Roofs - Black - Qty 4
Replaces Inno INSU-K5
Video of Custom Fit Roof Rack Kit With INB147 | INK766 | INSUT
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Inno Roof Rack Installation - 2018 Chevrolet Traverse
Hi everyone. It's Evangeline, right here at etrailer. And today, we'll be taking a look at our Inno Roof Rack System with the Inno Square Crossbars, the Inno Feet for Square Crossbars, and the Custom Fit Inno Fit Kit on our 2018 Chevrolet Traverse. So, this is the Square Roof Rack System from Inno. You have different options for your Chevrolet Traverse. You could get Aero Crossbars, which are that more modern crossbars, or you could get these Square Crossbars.
Some reasons you might like them, is maybe you have older accessories that can only fit around square crossbars, or if you want something lighter, or if you want more overhang and have the ability to do so, you can with square crossbars. You do get an overhang of 2 1/4 inches of overhang from the tower to the endcap. So, this will determine, if you do have other accessories, let's say kayak carriers that require a little bit more overhang, you can very easily upgrade to longer crossbars if needed. The crossbars themselves have a weight capacity of 220 pounds, which is very impressive. But remember, you are limited by whichever is lower of the weight capacities, be it your crossbars, your towers, or your actual roof weight capacity.
In our case here, our Inno Feet for Square Crossbars has a weight capacity of 132 pounds. So, that's kinda being pretty much a limiting factor. Now, this is a lockable system. Meaning once you have these keys, you could just put them right into your towers, and this allows you to loosen or tighten down your towers and just help deter theft of your roof rack. While the Traverse can have raised side rails, or it might also not have raised side rails, in our case here, this is a naked roof, so we do have this custom-fit kit for our roof.
Now, the downside to that is you are limited to a very specific spot on your vehicle to place those towers, which gives you a crossbar spread of 26 inches from this point to that point. And that will be the crossbar spread that you will have to use with whatever accessory you have on there. I am five two, and as you can see, it's kind of a reach to get onto the top of our Chevrolet Traverse, which may be something worth considering with getting more or less overhang. Another thing I recommend adding to your repertoire is maybe you should take a look at the Moki doorstep, which hooks right into your door and gives you a little extra height, which may be useful as you have a roof box, a roof basket, or let's say you're strapping down a kayak. Now, let's talk about roof clearance.
So, first is the clearance from the lower crossbar to the top of your roof. That's gonna be the clearance for your clamps, or if you have skis and snowboards, you wanna see if there's enough space for your bindings before they hit your roof. So, measuring from the roof to the crossbar, it's at about 3 1/4 inches. As for the roof height this adds to your vehicle, it sits at about 4 1/4 inches. The crossbar itself is made of steel, but it is coated with this rubberized material, which is gonna help with scuffs and scratches, but also keeps this system on the lighter side as it's on your booth, but while maintaining its great weight capacity. So, my personal thoughts about our Inno Roof Rack here on our Traverse, is I do like the Aero Style Crossbars, simply because I like to use the more modern accessories that utilize the T-track channels, and things like that. But, I do understand that others still have accessories that work best with the square design on your more traditional crossbars. Also, they do sit a little bit more low profile, and they're on the easier side to throw on, compared to the Aero Crossbars from Inno. So, you have your pros, you have your cons. I personally recommend upgrading to the aero system if you can, but if you need that extra overhang, this is still a good system that will work on your Traverse. So, the install process is kind of involved, but that's what this video is for, right Because, we wanna make sure that you get the correct rear crossbar and the front crossbars in the correct places. You're gonna have three sets of things, which is gonna be your fit kit, and those have different foot pads with different numbers. Then you have your towers, and these are gonna be what's holding your crossbars up in place. And finally, you have your square crossbars. So, first we're gonna set up the fit kit with the tower. Notice how your fit kit has a number underneath the foot pad. So this is four two seven, and that's gonna go on your front crossbar. And then you're gonna have another set, which is four one nine, and those go on the rear crossbars. Since I already installed the rear crossbar, we can install the front crossbar together. So, get your foot pad and just pop it into the tower itself. Once those foot pads are set up and secure, you're then going to set up the fit hooks. So, you may have a lock on the end of your tower, kinda like what I have here, so that has to be unthreaded first. Once that's out, you also have this lock, and that's gonna go to the side as you place your hook in, kinda fit that into place, and then get this lined up as well. And do the same thing on the other tower. With your towers now set up, you can then attach the towers to your crossbar. So, notice where this lock is. If you push that lock down, you can see how the bracket on the top of your tower goes down as well. So, get that lined up and just push that down, because that's gonna be what you'll use to attach your crossbar. Once you have that push down enough, it should slide right onto that crossbar. Now do the same on the other side, and then you can take some measurements. So, you're gonna measure the stay interior dimensions. And what that means, is measuring from one crossbar tower to the other crossbar tower. You're gonna get a specific length. That length is going to be inside your instructions. It's gonna be different for your front and your rear. So for your rear crossbar, which is this, it's going to be 47 1/4 inches long. To also make sure that your towers are in the right spots, Inno gives you the halfway mark instructions as well. So for your rear crossbar, it's gonna be from the center of the crossbar, there should be a marker on your crossbar, all the way to the end of the stay. It's going to be 23 5/8 inches to that point. So measure it and then address it accordingly. And now that we have our tower set to exactly where we want them to be, the next step is to put it onto our vehicle, but first let's take some measurements. So, you're gonna install your towers at a very specific point on your Chevrolet Traverse. So, for your rear tower it's going to be from the seam of your door, 21 3/4 inches to the center bolt of your tower. And then for your front crossbar, it's gonna be four inches from that seam towards the front of your vehicle. So, I have my friend, Tom, here, who's gonna help me out. We're gonna bring this up and over our vehicle, being very careful as we open the door, and then place it four inches away from that door seam. So, once you determined that it is four inches from that front seam, you're gonna then going to lift this hook up, and tighten this bolt down. It's a good amount of thread, so just keep going until it fully secures. Once you feel like you've gotten it tightened enough down, push this in, and then twist the lock to secure it. So, since that hook is custom-fit for your vehicle, once you do have it tightened down, don't be afraid to just slam your door on it, because it fits right in there. Don't forget to put the rubber endcaps onto your square crossbars. And once all four of those are in place, that's it for the install. And that was a look right here at our Inno Square Roof Rack system, here on our 2018 Chevrolet Traverse. My name is Evangeline, and I hope you enjoyed the journey..
Customer Reviews
Custom Fit Roof Rack Kit With INB147 | INK766 | INSUT - IN75TR
Average Customer Rating: 4.7 out of 5 stars (284 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.by: Lisa L.04/07/2023
Great looks, feels very sturdy. Super easy to install. Only downside is they are a little noisy, but that was expected from the square bars. Went with square bars to use my older Thule kayak and bike rack systems. I installed the Inno mounting system myself...no problem. Directions were very good!
by: 04/23/2024
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
by: Michael09/21/2023
2015 Honda Civic
Good quality rack system, easy to assemble and install, works well, looks good, fair price, I'm very satisfied with this purchase. I appreciate the guidance I received from William B. at the beginning of my search for a roof rack to carry a canoe on my 2015 Honda Civic. Two thumbs up for this purchase.
by: Blah Blah Blah Motorcycles04/08/2024
Easy to install and have worked great so far!
by: Ferne03/27/2024
Super easy to install and remove. Lock feature is great
by: Caitlin08/10/2023
Volkswagen Golf
Works well, has stayed attached with no issues. We've used them (plus the bars) to keep a canoe and a rocket box on the car at different times throughout the year (not at the same time, it's on a tiny golf).
by: Chris02/21/2024
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
by: David 05/08/2024
Perfection!!!
by: Chris07/13/2023
Worked great! Traveled with a carrier on these racks from Chicago to Seattle. No issues, would buy again!
by: Charles 05/10/2024
Perfect fit.
by: Ian07/26/2023
I have two standup paddle boards that literally live in the racks, and have since day one.
The racks are awesome.
by: Alberto11/22/2022
Really great value! No need to spend a lot on Thule. Even those these are square shaped I actually don't hear much road noise. Besides, you're gonna have music playing or riding with the windows down anyway. I would definitely buy these again.
by: William11/16/2020
etrailer.com you guys are great every thing came on time. i bought the inno sq bar roof rack for its price point and i like the look. I have a thule roof box I need to mount . The SQ bars are a bit noisy so I plan on buying the rack faring. On the front mounting pads the directions say there is a gap but it seems extreme i will post a pic I also checked the measurements 3 times. when i get a chance i might re-adjust the front pads.. Please Advise
by: Brian Kashner02/21/2023
Odelia was extremely helpful in helping me choose the right product. I had an end-cap that was missing and she sent me whole package of four. This is the kind of customer support one hopes to receive when deciding to spend a few hundred dollars on a product. I will definitely return to etrailer if I need another car rack for our other car.
by: Jake 04/07/2023
Just what I was looking for to put up my rooftop tent. These are also a fraction of the cost for Yakima bars.
by: Lisa07/23/2020
I am a fifty-four year old single woman and being able to install these roof racks by myself makes me feel empowered!!
I watched a video emailed with my delivery confirmation of an installation on a similar vehicle all the way through first, and then watched it again as I did the steps myself, pausing when I needed to.
The products appear to be of high quality, were packaged/shipped neatly and it was easy to organize everything for installation. I couldn't be happier!
by: David08/12/2018
Installation is easy. Just follow directions. Front bar parts are different than rear bar parts so you need to look at part numbers and use in correct location. Rack is only rated for 100 pounds but looks and feels much stronger than rating. As noted square bars do create lot of wind noise when driving. Purchase this product to carry my Canoe and it does that at almost $200 less than other rack systems on market. For me the square bars are better fit with ratchet straps to hold Canoe down. Hard to find ratchet strap with hook to fit areo bars.
Dislike. No way to level square bars. With car on level ground high point to high point on bars is level. But each bar is off by 1/8" front to back. Wish they were round bars.
by: Sean D06/01/2019
Waited till I put the new rack to work before review. Used it the first time today and it worked Great. Seems like a very durable rack system. Love that everything is rubber coated so it doesnt scratch the paint on your car. Installing instructions where a little confusing but found YouTube videos from etrailer on how to install exact rack system.
by: Daniel07/01/2023
Quick and responsive customer service! Thank you etrailer!
by: Daniel07/01/2023
Quick and responsive customer service! Thank you etrailer!
by: Bradley07/16/2020
2003 Toyota Tacoma
Good morning so the order I got is amazing I have a old school thule roof rack that I needed the write stuff so can start putting bikes on my roof an my fishing gear or some small stuff for off roading an it works great I will be sure to be buying more stuff from this site great job with the shipping it was very fast an packaging was great it was easy to install an it looks great on my 03 Toyota tacoma thanks again
by: CP05/12/2023
Great roof rack. Easy to install and du rable!
by: LD05/14/2023
Toyota
Worked well for my 2006 Toyota Prius
by: Tom Burger05/23/2021
I followed directions and the rack went on without a hitch. The measuring tape provided was a bit confusing but my tape measure did just fine. It pays to watch for any movement of the stays as you tighten them. It fit perfectly. I was impressed with the quality of the unit. The torque wrench provided was a nice bonus. I attached a boat rack for my rowing shell and I’m confident it will be safe all the way to the water.
by: Josh12/12/2020
I’ve had many Thule and Yakima racks over the years, both great products, but this Inno product is equally as good if not better at a much better price, I couldn’t be happier! Courtney was super helpful shipping was FAST!! Don’t hesitate....
25
1004
Show More Reviews
See what our Experts say about this Inno Roof Rack
- Will Inno Feet for Rain Gutters Work With Side Loader Mounting BracketsThe Side Loader Mounting Brackets part # Y08002 are simply bolt-on artificial rail gutters so they should work just fine with the Inno Feet for Square Crossbars part # INLD. The Inno Square Crossbars part # INB147 would then be compatible with the Inno Feet for Square Crossbars.
view full answer... - How Do I Know Which Roof Rack Accessories Will Work With My Roof Rack On 2012 Scion XB?When determining if certain accessories can be mounted to a roof rack system you want to look at a few things. First, if it is a clamp-on accessory then you to make sure it can fit the style of roof rack that you have (square, round, aero etc.). You then want to check the max crossbar dimensions that the accessory can fit and make sure the roof rack is not bigger than that max dimension; these dimensions are typically listed on the product page of roof racks and any roof rack-mounted accessories....
view full answer...
- Roof Rack Recommendation for 2017 Acura MDX with a Naked RoofWe do have a roof rack that fits the naked roof on your 2017 Acura MDX, but the SportRack Semi-Custom Roof Rack # SR1008 will not fit. For your application I recommend the Inno Square Bar roof rack system which consists of the following: 58" Long Square Crossbars - # INB147 Inno Feet - # INSUT Custom Fit Kit - # INK656 This will actually fit much better than the SportRack roof rack system and we have an install video of the Inno on a 2016 Acura MDX that you can check out.
view full answer... - Roof Racks for 2011 Acura MDX with Naked RoofAll aftermarket roof racks for your 2011 Acura MDX that has a naked roof are shown on the linked page. These include racks from Yakima, Rhino-Rack and Inno. All of these rack systems will use door jamb clamp-style attachments to mount onto your vehicle's naked roof. The main differences between these racks are their bar shapes (square, round or elliptical), their bar spacing and their weight ratings. These features are noted for each rack system shown. The widest bar spread and highest...
view full answer... - Does the 2013 Scion xB Roof Rack by Inno Have Pads That Protect the Roof/PaintYes, the 2013 Scion xB Roof Rack by Inno which consist of the below parts, does include pads to protect your paint/roof. 2013 Scion xB Roof Rack by Inno - Inno Square Crossbars # INB147 - Inno Feet for Square Crossbars # INSUT - Custom Fit Kit for Inno # INK300 The Custom Fit Kit for Inno # INK300 is the part that has the pads. They are molded pads that are custom designed to fit the contours of your roof, protect your roof surface from scratches and abrasions and they just press onto...
view full answer... - How to Carry 2 Kayaks with the Darby Extend-A-Truck Kayak Carrier on a 2013 Toyota TundraThe foam block that comes with the Darby Extend-A-Truck Kayak Carrier # DTA944-968-924 is really only meant to be used with 1 kayak so if you plan on carrying 2 you need to acquire more blocks with part # MPG158. We do have some tie-downs attached to the load extender down to the safety chain loops to help stabilize the load extender. Please note that this kit is meant to be used for short distances as the roof rack crossbar is very basic and isn't meant for long distance traveling. If...
view full answer... - Can 58" Square Inno Crossbars be Purchased IndividuallyAll of the Inno crossbars, including the 58" Inno Square Crossbars # INB147 that you referenced, are sold in pairs. I confirmed this with my contact at Inno. You will need to purchase 2 sets of crossbars and keep 1 as a backup in case something were to happen to one of them. If you need any parts to mount these to your vehicle just let me know the year/make/model and I can see what other parts will be needed.
view full answer... - Inno Roof Rack Recommendation for 2007 Subaru ForesterFor your 2007 Subaru Forester with raised side rails we have the Inno roof rack part numbers # INB117, # INTR, # INTR104 that INNO recommends as a fit. The bars that come with this, # INB117 are 46 inches long. If you wanted the longer 58 inch bars you'd need the part # INB147.
view full answer... - Weight Limit of Thule Traverse Roof Rack with FitKit # THKIT1520 on 2014 Ram 1500 Crew CabThe different components that make up the Thule Traverse roof rack for your 2014 Dodge 1500 crew cab have differing ratings. The load bars # INB147 for example are themselves rated for 165-lbs while the foot pack and fit kit are rated lower, 130-lbs. It can also be that the vehicle has a lower roof weight rating than any of the rack system components. Whenever different parts of a system have different ratings, the lowest-rated one determines the overall capacity. My contact at Thule...
view full answer... - What Crossbars Should be Used with Inno Roof Rack Feet part # INMDKYou need to use Inno crossbars with the Inno Feet part # INMDK that you referenced. Based on the length you said you wanted you'd want the part # INB147 which is a pair of 58 inch long bars.
view full answer... - Using Two Thule Hullavators on 2014 Chevy Volt with Inno Roof RackThe minimum crossbar spread the Thule Hullavator part # TH898 can fit is 24 inch so if you have a 26 with an Inno rack installed that would work great. Since you already have the two Hullavators you may as well go that route. Especially since they are really nice and assisted. So for that you'd need the part numbers # INSUT, # INK624, and # INB147 and you'd be set.
view full answer... - Roof Rack Fit for 2013 Toyota Tundra CrewMaxWe do have a reasonably-priced roof rack option for your 2013 Tundra CrewMax, but none of the SportRack roof racks like the # SR1002 you mentioned would be compatible. Inno offers a roof rack that would be assembled from the following parts: 58 Inch Square Crossbars, part # INB147 Roof Rack Feet, part # INSUT Vehicle Specific Clamp Kit, part # INK742
view full answer... - Rooftop Cargo Basket for 2005 Toyota Tundra Double Cab With Inno Square Bar Roof RackWe do have a rooftop cargo basket for your 2005 Toyota Tundra Double Cab that will work with the square bar roof rack from Inno, which consists of the following: - Inno Square Crossbars # INB147 - Inno Feet for Square Crossbars # INSUT - Custom Fit Kit # INK532 What you will need is a rooftop cargo basket and rooftop cargo bag, which you can combine to give you the same amount of carrying capacity as a rooftop cargo box. The best option is from Yakima: - Yakima LoadWarrior Roof Rack...
view full answer... - Can 2007 Chevy Suburban w/ Raised Rails Use Inno Square Crossbars Longer Than 54 InchesIf you'd like you can go with Inno square crossbars that are longer than the 54 inch # INB137 on your 2007 Chevy Suburban with raised side rails. There aren't 60 inch crossbars but you can go with 58 inch long bars to give you some extra space, and here is exactly what you will need: - Inno Square Crossbars - 58" Long # INB147 - Inno Feet for Square Crossbars - Raised Side Rails # INFR This will give you a nice amount of added room to carry cargo on top of your '07 Suburban, and the...
view full answer... - Rhino-Rack Roof Rack Parts for a 2011 Infiniti G37The Rhino-Rack 2500 parts you need for your 2011 Infiniti G37 include the following: 46" Vortex Aero Crossbars - # RRVA118B-2 2500 Series Legs - # RRRLKVA Fit Kit - # DK211 The Rhino-Rack crossbars only have a limited amount of space on the underside of the crossbars so you will be limited to the 46" crossbars. If you'd like to use longer crossbars then I recommend checking out the Inno Square Crossbar setup: 50" Crossbars - # INB127 Feet - # INSUT Fit Kit - # INK735 If you'd like to...
view full answer... - Roof Rack for 2017 MDX with Naked Roof for Carrying 2 KayaksI would go with an aftermarket roof rack for your 2017 Acura MDX as it's going to cost considerably less and be just as good if not better. For the money and the quality the Rhino Rack # RRVA137B-2, # RRRLKVA, and # DK400 is the best option. It gives you an aero bar roof rack that's very high quality at a price that beats the higher end rack manufacturers. The INNO kayak carrier part # INA450 then would be a great choice as it can carry up to 2 kayaks like what you need.
view full answer... - Roof Rack Feet for 2019 Ford Expedition that Can Fit Thule Square Bars Inno square bars are exact same dimensions as the Thule crossbars so what you could use is the Inno Feet for Raised Rails part # INFR which fits the raised rails of your 2019 Ford Expedition and you'd be set. Normally you'd use these feet with the bars # INB147.
view full answer... - Roof Rack and Ski Box for a 2009 Ford Flex With Vista RoofFor your 2009 Ford Flex, I recommend an Inno square bar kit with a Thule Pulse Alpine roof box, part # TH613. The Inno square kit will provide a solid base for your roof box, and consists of the following parts: Inno Square Crossbars, 58 inches, part # INB147 Inno Feet for Square Bars, part # INSUT Inno Custom Fit Kit, part # INK263. This rack includes locks for added security and can be removed when unlocked to preserve the styling of the first generation Ford Flex. The Thule Pulse...
view full answer... - Recommended Roof Rack for a 2007 Toyota Sienna Using a Thule Hullavator I would be happy to! There are two different types of rails to mount a roof rack you could have on the roof of your 2007 Toyota Sienna so I will make recommendations for both. The Thule Hullavator item # TH898 also requires an extra 4" - 8" past the mounting legs for the lift assist function to operate without hitting the side of your van. I have listed the two options below that would be the best choice and included the longer crossbars: With Raised Rails Rhino-Rack Vortex Aero Crossbars...
view full answer... - Are the Inno Square Crossbars # INB147 and the Malone SteelTop Roof Rack # MPG202 the Same?I have an answer for you. Unfortunately, the Inno Square Crossbars # INB147 does not come with the feet (that have the locking mechanism) that are needed to mount the crossbars to your 2018 Honda Odyssey's roof. The Malone SteelTop Roof Rack # MPG202, on the other hand, comes with all the parts needed to mount onto your vehicle's roof. For the feet for the Inno crossbars, that is part # INFR. Other than the feet on the Inno square crossbars, another difference between the roof rack systems...
view full answer... - Will the Inno Square Crossbars Fit the Thule Tracker II Feet?Yes. Since the Inno Square Crossbars # INB147 have the same dimensions as the Thule SquareBar Evo Crossbars # TH712300 (7/8" tall x 1-1/4" wide), the Inno Square Crossbars will fit the Replacement Railing Foot for Thule Tracker II 753-2152..
view full answer... - Does Inno Square Bar Roof Rack Fit 2009 Acura MDX With Naked RoofYes, the Inno square bar roof rack will absolutely fit your 2009 Acura MDX with a naked roof You do need to purchase the legs separately, and everything you need for the complete Inno roof rack on your 2009 Acura MDX are the following: - Inno Square Crossbars # INB147 - Inno Feet for Square Crossbars # INSUT - Custom Fit Kit # INK590 Since these are square crossbars, I do recommend considering a wind fairing to help minimize the wind noise, with the correct one being the Inno Fairing...
view full answer... - Inno Square Bar Roof Rack for 2003 Mercury MountaineerIn order to get the longer bars, you'd order the parts separately. You'd need the roof rack feet, part # INFR and the # INB147. There won't be a cost difference by ordering the feet and crossbars separately. You might also be interested in a fairing like # INA260 would make the rack more aerodynamic, reducing the wind noise. I've linked you to some product description videos for some of the parts I mentioned.
view full answer... - Can You Use Square Thule Crossbars On An Inno Roof Rack Installed On 2008 Scion xB?You will want to stick with one brand throughout the entire roof rack kit; various brands of roof racks are not made to be compatible and interchangeable with each other. The most economical roof rack for your 2008 Scion xB is Inno Square Crossbars - Steel - Black - 58" Long - Qty 2 # INB147 with Feet # INSUT and Fit Kit # INK300. This has a weight capacity of 120lbs.
view full answer... - Roof Rack Recommendation for 2015 Mini Cooper Hardtop for Carrying KayaksWhile we don't have a Rola roof rack confirmed as a fit for your 2015 Mini Cooper with a hardtop I do have a great economically priced option that is a confirmed fit and would work great for carrying a kayak. For that I'd recommend the Inno roof rack part numbers # INB117, # INSUT, and # INK463. This a square bar roof rack that is custom fit for your vehicle that comes with all of the needed components to fit. Then for a kayak carrier the Yakima JayLow part # Y04073 is a really great...
view full answer... - Recommended Roof Rack for 2010 Dodge CaliberI recommend using the Inno Roof Rack Kit for Dodge Caliber that uses parts # INB127, # INSUT, # INK555 which will give you a nice roof rack at a good price. The Inno kit uses durable square crossbars and will attach to naked roofs to provide you with a solution that allows you to carry cargo carriers, ski racks and bike racks, plus a variety of other roof rack mounted accessories. I've linked a short review and installation video of this kit for you to check out.
view full answer... - How Do I Know Which Roof Rack Accessories Will Work With My Roof Rack On 2012 Scion XB?When determining if certain accessories can be mounted to a roof rack system you want to look at a few things. First, if it is a clamp-on accessory then you to make sure it can fit the style of roof rack that you have (square, round, aero etc.). You then want to check the max crossbar dimensions that the accessory can fit and make sure the roof rack is not bigger than that max dimension; these dimensions are typically listed on the product page of roof racks and any roof rack-mounted accessories....
view full answer... - Inno Roof Rack Compatibility with 2008 Hyundai TiburonThe Inno Square Crossbars - Steel - Black - 50" Long - Qty 2 # INB127 are a fit for your 2008 Hyundai Tiburon when used with the Inno Feet for Square Crossbars - Naked Roofs # INSUT, the Short Roof Adapter Kit for Inno Square Crossbars # INJK, and the Custom Fit Kit # INK295. The fit kit is the key to the question you are asking as it is designed specifically for your vehicle to fit the door jambs. The clips will follow the jamb to roof transition perfectly and the pad feet will ensure...
view full answer... - Roof Rack and Paddleboard Carrier Recommendations for a 2010 Subaru LegacyThe Semi-Custom roof rack # SR1010 is listed for your 2010 Subaru Legacy. Since it is semi-custom it won't be the best fit like a true custom fit rack would be. If you are interested in a true custom fit rack I recommend an Inno rack using the following parts: bars # INB137, foot pack # INSUT, and fit kit # INK851. With either roof rack installed you can then add a paddleboard carrier. The Yakima SUPDawg # Y04075 is a popular option. It can hold up to 2 paddleboards that are up to 36 inches...
view full answer... - Recommended Roof Rack to Fit a 2011 Scion XBWe carry a few different roof rack systems the will work on your 2011 Scion xB. I recommend the Rhino-Rack Vortex Aero Rack System, # RRVA137B-2 Vortex Aero Bars, # RRRLKVA 2500 Series Legs, and # DK152 Fit Kit. The Vortex crossbars are a more aerodynamic bar that will cut down on wind drag and noise. The bars are constructed of lightweight aluminum and provide a low-profile and sleek design. All the racks listed can carry up to two kayak. However, consulting your owner's manual to find...
view full answer... - Inexpensive Roof Rack Options for a 2016 Ford EscapeI do have options for you but there are two different roof configurations for a 2016 Ford Escape, bare roof and raised side rails. It sounds like you may be looking for a budget roof rack and if that is the case then I have two great options for you. If you have a bare roof then the best economical option we have is the Inno Square Crossbar System part # INB137, part # INSUT, part # INK628. If you have raised side rails then the best economical option option we have is the SportRack Semi-Custom...
view full answer... - Roof Rack For 6th Generation Honda Accord (1998) SedanThe sixth generation started with the 1998 model year per my research, so if yours is the sixth generation you'll need a roof rack that fits the '98 models. There is one option for that, from Inno: - Inno Square Crossbars # INB127 - Inno Feet for Square Crossbars # INSUT - Custom Fit Kit # INK249
view full answer... - Recommended Square Bar Roof Rack Setup For 2010 Honda Accord SedanI have a solution for you, but Thule does not have any roof rack kits available for your vehicle. While I'm sure this is not the news you would like to hear, I will go ahead and give you my recommendation for a new setup. If you would like to stick with a similar square-bar setup, then I'd go with Inno Square Crossbars - Steel - Black - 50" Long # INB127. You will also need Feet # INSUT and Fit Kit # INK745. Locks and keys are included for the crossbar feet, which will keep it secured to...
view full answer... - Roof Rack and Kayak Carrier Recommendation for 2014 Toyota Yaris with Naked RoofThe first thing you'll need on your 2014 Toyota Yaris is a roof rack to carry a kayak carrier. The best value for that is the Inno square bar roof rack that consists of part numbers # INB117, # INSUT, and # INK791. This rack gives you a higher quality roof rack that fits well and installs easily at the lower price point of the more economic racks. Then for a kayak carrier the Yakima JayLow # Y04073 is a really great choice as it's easy to load, installs easily, and can fold down when not...
view full answer... - Inno Fit Kit for a 2013 Honda CR-V with Square BarsIt looks like you have the Inno Square Bar setup on your old Scion. The fit kit you referenced, part # INK225, is not the one that is confirmed to fit your 2013 Honda CR-V. The proper part number for your fit kit is # INK413. These have the parts for the fit kit. Of course, I cannot confirm if this will work for you since I cannot 100% confirm that you have the square bar and the Inno Feet, part # INSUT. If this is the setup you have, then the # INK413 will work.
view full answer...
- Trailer Hitch and 4 Bike Carrying Recommendation for 2009 Lincoln MKZThe Curt # C11329 is indeed a fit for your 2009 Lincoln MKZ. This would work great for you. You can use an adapter like # HTAD, but there's 2 problems with doing that. Both the hitch and bike rack manufacturers state that no more than 2 bikes should be carried in a bike rack used in a Class I hitch. Adding a 3rd and 4th bike moves too much weight too far away from the hitch receiver tube which can apply enough leverage to damage the hitch or cause the attachment points to the vehicle...
view full answer... - Roof Rack Fit Kit and Feet Compatible with Older Thule Square Bars for 2016 Hyundai SonataI do have a solution for you. It will allow you to use your old Thule crossbars on your 2016 Hyundai Sonata. Your roof rack will consist of the following items: Inno Square Crossbars - Steel - Black - 50" Long - Qty 2, part # INB127 Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4, part INSUT Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet, part # INK602 This roof rack will have a maximum weight limit of 120 lbs. Unfortunately, the new Thule feet do not work...
view full answer... - Availability of Trailer Hitch for a 2000 Acura IntegraIt looks like there are no longer any trailer hitches that fit your 2000 Acura Integra. The Curt Trailer Hitch Receiver 11147 was discontinued this year (2023) so you might try searching to see if you can find that hitch elsewhere, otherwise I recommend installing a roof rack in order to add some cargo-carrying capacity to your vehicle (if that's what you're needing to do): Sedan - 42" Square Crossbars # INB107 - Feet for Square Crossbars # INSUT - Fit Kit # INK130 Hatchback Same parts,...
view full answer... - Roof Rack Recommendation for a 2001 Toyota RAV4The SportRack roof rack # SR1002 is listed as a fit for your 2001 Toyota RAV4 with naked roof but it does not use those fixed mounting points. It is actually a semi-custom roof rack and would not offer the best fit so I would not recommend it over a true custom fit option. The most cost-effective, true custom fit roof rack for your RAV4 is from Inno using bars # INB117, feet # INSUT, and fit kit # INK244. It does not use those mounting points on your roof either. This rack will be a much...
view full answer...
- Square Bar Roof Rack that Fits 2015 Hyundai Sonata with Sun Roof/Moon RoofYes, the Inno Square bar roof rack part numbers # INB127, # INSUT, and # INK602 is a confirmed fit for your 2015 Hyundai Sonata that has the sun roof/moon roof.
view full answer... - Roof Rack Recommendation for 2017 Acura MDX with a Naked RoofWe do have a roof rack that fits the naked roof on your 2017 Acura MDX, but the SportRack Semi-Custom Roof Rack # SR1008 will not fit. For your application I recommend the Inno Square Bar roof rack system which consists of the following: 58" Long Square Crossbars - # INB147 Inno Feet - # INSUT Custom Fit Kit - # INK656 This will actually fit much better than the SportRack roof rack system and we have an install video of the Inno on a 2016 Acura MDX that you can check out.
view full answer... - Parts Needed to Fit Thule Square Bars on 2017 Mazda CX-5Yes, if you only have the rubber strip on the roof of your 2017 Mazda CX-5 then that would be considered the naked roof. The flush mount side rails actually stick up a little bit and are pretty noticeable. If you have the newer Thule SquareBar Evo crossbars that are 53" long then the following parts will give you a complete roof rack 53" SquareBar Bars - # TH712400 Evo Clamp Feet - # TH710501 Fit Kit - # TH145079 The newer SquareBar from Thule has a slot on the underside of the bar that...
view full answer... - Roof Rack Recommendations for 2015 Mini Cooper S HardtopSince there are no hitch fits for your 2015 Mini Cooper S sedan hardtop I would go with a trunk mounted bike rack like the Hollywood Racks Over the Top part # HRF2 which is designed to fit vehicles with spoilers like yours and is a confirmed fit. A roof rack bike rack is a great option as well. This would probably be the better option since the bikes will be very secure on the roof and you'd still be able to get into the rear cargo area of your vehicle with the bikes installed. For that...
view full answer... - Inexpensive Roof Rack Recommendation for 2015 VW PassatThe least expensive roof rack we have that's confirmed to fit your 2015 Volkswagen Passat is an Inno square bar system. You need the 50 inch square bars, part # INB127, feet # INSUT, and the fit kit # INK591. I've linked a video from when we installed the rack on a 2015 Passat. According to SportRack, the contours of the 2015 Jetta and Passat are different enough that their # SR1010 will not fit the 2015 Passat.
view full answer... - What Bike Rack and Trailer Hitch do you Recommend for my 2014 Mazda 6I recommend the Curt Trailer Hitch Receiver Class I # C11356 for your 2014 Mazda 6. We have test fitted this product on your vehicle and Curt confirms this hitch will fit on your 2014 Mazda 6. The hitch is easily bolted on for installation and the complete hardware kit is included with your hitch. A gloss black powder coat finish provides a protective base coat which offers superior rust resistance. I have attached a photo of this hitch on your vehicle. However, if you are planning on...
view full answer... - Roof Rack Recommendation for 2016 Ford Fiesta SedanThe best value roof rack we have for your 2016 Ford Fiesta that has a naked roof is the Inno rack part numbers # INB127, # INSUT, and # INK872. This will fit MUCH better than the Sportrack you tried as it is a custom fit rack and what you tried is only semi-custom and is a design that would most likely at least partially transfer to a similar future vehicle. Then for a 2 kayak carrier the Thule Compass part # TH890000 fits this rack and would be an easy way to carry your kayaks. It's padded...
view full answer...
- Roof Rack Compatible With The Most Roof Mounted AccessoriesThe majority of rooftop mounted accessories such as bike racks and kayaks carrier are universal meaning that a Thule bike rack will work on a Yakima roof rack and vice versa. If you are looking for a roof rack that is compatible with the greatest variety of rooftop mounted accessory, I recommend using the Inno Square Crossbar System part # INB127, part # INSUT, part # INK758 as square crossbars are generally compatible with a greater variety of rooftop accessories in comparison to round/aero...
view full answer... - Does the 2013 Scion xB Roof Rack by Inno Have Pads That Protect the Roof/PaintYes, the 2013 Scion xB Roof Rack by Inno which consist of the below parts, does include pads to protect your paint/roof. 2013 Scion xB Roof Rack by Inno - Inno Square Crossbars # INB147 - Inno Feet for Square Crossbars # INSUT - Custom Fit Kit for Inno # INK300 The Custom Fit Kit for Inno # INK300 is the part that has the pads. They are molded pads that are custom designed to fit the contours of your roof, protect your roof surface from scratches and abrasions and they just press onto...
view full answer... - Roof Rack for 2008 Land Rover Range Rover Sport With Naked Roof to Carry SUPsThe best value for a roof rack for your 2008 Land Rover Range Rover Sport with a naked roof to carry your SUPs is going to be from Inno because it gives you a high-quality aerodynamic rack at a price that is less than other recognizable brands. The parts you need are the following: - Inno Aero Crossbars # INXB153-2 - Inno Through Feet for Aero Crossbars # INXS250 - Custom Fit Kit # INK766 Then to carry either 1 or 2 SUPs I highly recommend the Inno Locker Watersport Carrier # INXA445. The...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Ashley K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.