TRED GT Jack Pads for RVs and Trailers - Polyurethane - Qty 4

Video Transcript for Review of Rhino Rack - TRED GT Jack Pads - RR94AP

Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the TRED GT stabilizer jack pads for RVs and trailers. It is for a quantity of four pads. Now, these jack pads provide a cushion so your metal jack foot won't damage your driveway or sink into the ground. So these are great for leveling systems on class A motor homes, fifth wheels, and even travel trailers. They are designed to work with standard tongue jacks, standard landing gears, and scissor jacks.

These are constructed of a high-impact polyurethane. They do hold up under tremendous weight, and they'll resist cuffs and abrasions. What's nice about these, they are a stackable design. So they'll let you layer additional pads together when you need some extra height, so you get a quantity of four of them. So if you need to get some extra height, you can just take one on top of the other, push them together and just like that they attach, and same way you just keep going with all four of them and then they're all stuck together.

This part is for a quantity of four of them. Now, we do also sell these individually if you just need one of them. They go by a part number of RR34AP. Also, what's nice on these pads, they use a TRED-link design on the part, and that allows you to nest all the components together in one part for a nice, easy, grab and go convenience. Now, I did wanna demonstrate how they nest together.

I happen to pull a, we do sell a demo or a pack, which is this here. It's sold separately on our website, and it's a part number RR74AP. And what this is, you can see is it's all connected together. It gives you two leveling ramps, two wheel chocks, one on each end, and then you'll notice the four jack pads, two up here, two up here, and they all snap together like a puzzle. So this whole pack is only about 12 pounds when it's put all together, but it keeps everything together, then you just pop them apart.

You can see the pads pop right off when you need them, and then to store them when you're not using them to keep from losing any of them. You just snap them all together. And again, we sell that separately on our website. Last thing I wanna do is give you the dimensions on one of these pads. The width of it, we'll go from this side all the way over to this side is gonna be right at 8-9/16 inches. The length, this end to this end, is about 9-3/4 inches. Now, I also wanna give you the measurements. If you notice they have a recess in them and it's recessed for either a rectangular foot or a round foot. So the recess portion for the rectangular, and again we're gonna measure the inside, is gonna be right at six inches long. And for the rectangular foot, up to 3-1/2 inches wide. And then the round foot, which is the center portion here, that's gonna be a diameter, so the diameter for a round foot is right at about 4-5/8 inches. But again, you can take these, stack them all together. Or as we've mentioned, if you have that pack I showed you, they'll stack all onto that pack. But that should do it for the review of the TRED GT stabilizer jack pads for RVs and trailers for a quantity of four.