TRED GT Jack Pad for RVs and Trailers - Polyurethane - Qty 1

Video Transcript for Review of Rhino Rack - TRED GT Jack Pad - RR34AP

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this TRED GT Stabilizer Jack Pad for RVs and trailers. This is for a quantity of one pad. Now this jack pad here provides a nice cushion so your metal jack foot won't damage your driveway, or sink into the ground. So this is great for leveling systems like on your class A motor homes, your fifth wheels, and even your travel trailers. This is designed to work with standard tongue jacks, standard landing gear, and even scissor jacks.

This is constructed of a high impact polyurethane, so to hold up under tremendous weight and it even resists scuffs and abrasions. Also, a nice feature on this, this is a stackable design. So this is for a quantity of one pad, but if you buy extras, it'll let you layer additional pads and they snap together when you need extra height, we do sell those separately, but I did want to show you here, I grabbed an extra one just to show you. You can see the two connectors right there. So if you want to gain an extra height, just put it on, push it down on both sides, and now they're connected as one and you can just keep putting on top of there as much height as you need.

Now we do also sell a pack of four of these pads if you do need more than one, and the pack of four is a part number RR94AP, and we do sell those separately on our website. Also, a nice feature on this, this uses the TRED link design on this part. And what that does, it allows you to nest all the components together in one part for a nice, easy grab and go convenience. I did want to show you, I also happen to pull a pack and what the pack is, lemme pull it up here if you see it. It includes, we mentioned the jack plates.

It gives you four of those, two on top, two on bottom, gives you two leveling ramps, the gray areas, and then on the ends it gives you two wheel chocks. But what's unique is it's almost like a puzzle. You can see it clips all together in one single unit. It only weighs about 12 pounds. So basically you're getting two leveling ramps, two chocks, and then four jack pads.

This part we sell separately as part number RR74AP. But just to show you when we said TRED length design, you can see the pads, they just pop off and then you can use the pads and then when you need it, you're done with them and you want to storm 'em so you don't lose them, to have 'em all different parts laid out, just snap it back on there and you see it snaps into place and you don't lose them. Now the part we're going over right now is just for the one jack pad. So the last thing I wanna do is give you some dimensions on this. So we'll do first the length, and the length, if we go from one end to the other, you can see it's gonna be right at about 9" or 9-3/4" wide by 8-9/16" long. And if you notice on the other side, it has a recess cut out for either a rectangular foot pad or a round foot pad, rectangular pad that'll fit in that recess is about six inches long, probably about three and a half inches wide. And the round foot access, the diameter on that, it's about 4-5/8". But that's gonna do it for the review on the TRED GT Stabilizer Jack Pad for RVs and trailers.