Sleek RV kitchen faucet has plastic compression valve stems that help prevent leaks so you won't have to worry about wasted water. Deck plate and mounting hardware are included to make it easy to replace your existing faucet.
Features:
Specs:
To install, use the inlet shanks to drop the new faucet and deck plate in place of your existing faucet. Then tighten the included mounting nuts against the underside of the counter, and connect the hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Phoenix Faucets chrome finish, dual handle RV kitchen faucet. Now this is a chrome plastic construction on the base and on the spout. You notice the spout does rotate, does have a nice Dura Pro under body. On the inside, they use a brass compression valve. The handles you can see are the nice dual teacup handle design for the hot and cold water. Now the flow rate on this faucet is 2.2 gallons per minute. On the very bottom, you can see the two water connections here.
Now the distance between those center to center is going to be right at 8 inches. Now when you do go to install this, all you have to do is remove these plastic lock nuts from the shanks. Basically align your faucet with the holes in the sink or 00:00:43 the counter, drop it into place, and then secure using these plastic lock nuts. I do want to give you a few measurements on this. We'll start with the spout length. Spout length a 00:00:52 be measured from here all the way up to here. If we take a ruler and put in on there, you can see that's going to be right at 8 inches for the spout length.
Now the height, which we'll measure from the very bottom of the base once this is installed to the very top at the tallest point. If we do that from the bottom to the highest point, it's going to be 6 1/2 inches for the height. Now the depth, the depth would be from the very back here to the very end that sticks out the furthest. The same way if we put it in the very back. It's going to be right at 10 inches for the overall depth to the very end here.
Then we'll measure the width of the base, which will be from this end all the way to this end. It's going to be right at 10 1/4 inches. Then the length of the two shanks here that connect to the water lines from the very bottom of the base to the end is going to be right at 2 inches for the shank length. Now this faucet does come with nice set of detailed instructions. It'll show you how to install it. On the very back it lists the parts list of all the parts that are included in this part number.
That should do it for the review on the Phoenix Faucets chrome finish, 8 inch, dual handle RV kitchen faucet.
Average Customer Rating: 4.7 out of 5 stars (290 Customer Reviews)
Sleek RV kitchen faucet has plastic compression valve stems that help prevent leaks so you won't have to worry about wasted water. Deck plate and mounting hardware are included to make it easy to replace your existing faucet.I have had nothing but good luck with everything I have ordered through retailer.
com Quick response with items. Shipping good. I Will keep buying from this company
Thanks Bob
Excellent quality material. Quick servi ce.
Product was exactly as expected. Excellent response and delivery. Will be ready for this weekend camp out.
Thanks
Dave
For the money and a quick easy repair well worth the purchase.
The only problem is the one I bought a year ago has been leaking in the hot faucet for half the time I’ve had it……leaks only when I turn the hot water on. Hopefully this new one will last longer. I like the long neck.
Really like this faucet. The extra height allows much easier washing of larger items in our small sink. I also like the handles as opposed to knobs. Can turn on and off easily with the back of my hand instead of having to grab and twist.
It's a great rv faucet. Perfect replacement for the oem faucet, and installed in only a few minutes.
Not satisfied. The end of the faucet was plastic and it was cracked and water sprayed all over my camper when I hooked it up to the water.
I'm perfectly pleased with everything shipping was great and the product was exactly as described.***** I have a 1978 dodge sportsmen royal class C and the facet was a perfect match. *****
Ordered this product to replace broken faucet in our motor home. Was an easy install, as hole spacing and fittings were an exact replacement for broken faucet. This was in large part due to etrailer.com's attention to providing as much information on their products as possible on their website ( showing actual dimensions and sizes ), so that I knew the product would fit without any other alterations to make it fit.
Bought this as an upgrade for an a-frame folding camper, 2006 Chalet Alpine. It was a direct swap, no modifications were needed. The screw-on spout is perfect, removing it allows the folding of the wall down. Great purchase!
Would definitely recommend this product for anyone wanting an easy to install and inexpensive kitchen (galley) faucet replacement. The product and experience with etrailer exceeded my expectations.
works great after a year of use.
Bought to replace original faucet that was leaking at the counter top connectors. This faucet has a higher arch and fit perfectly. Easy to install also.
Worked very well when we installed it. It was put in a customer's RV.
A great quality faucet.
Great faucet replaced the very small hardly useable faucet in my toy hauler pop up camper
The plastic hose very stiff and flexible
Perfect fit and easy change out
Great looking faucet, worth the money.... I purchased this for the high arch faucet and great looking handles!
We love it so much it pulls our RV kitchen together. And I have got to mention that the customer service is wonderful,
Amazing product...exactly what I needed...awesome customer service from George J...ordered Wednesday, received on Friday...definitely worth the $ for 2 days shipping! And it was on sale!!
This faucet was easy to install and looks great. The biggest problem was taking the old faucet out. Be sure to have a basin wrench handy to remove the old one. No modifications necessary.
Plug and play. Five minutes to install.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.