Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This pintle hook and hitch ball combo lets you haul up to 6,000 lbs with the 1-7/8", chrome-plated hitch ball, or up to 16,000 lbs with the pintle. Includes hardware for a bolt-on installation. Powder coated forged steel resists rust.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Curt Bolt On Combination Pintle and Ball Mount with a 1-7/8" Diameter Ball. Now this is a pintle hook and hitch ball combo that'll let you hook up your trailer to your tow vehicle. The pintle hook portion of this will allow you to connect to a lunette ring coupler and allow you to tow up to 16,000 pounds. It is designed to fit lunette ring couplers that have an inner hole diameter of 2-1/2" or 3". You can also use this as a 1-7/8" hitch ball and connect it to a standard ball coupler and allows you to tow up to 6,000 pounds.
Just to show you the two different ways, if you're gonna hook it up to lunette ring, what you wanna do is pop open the safety clip, remove that. As you can see, it's tethered so you don't lose it. Pull up on your handle right here and then just lift up the upper portion and that'll lock into place just like that. You'll get your lunette ring, which is a round ring, as I mentioned, the inner hole, it'll work on as either 2-1/2" or 3". Drop it over the ball.
Once that lunette ring drops over the ball, just push this down to hold it into place and then put your clip through there again to secure it. And it's locked and you're ready to tow with a lunette ring. If you want to tow with just the hitch ball, what you'll do is the same way. Open this up, lift up on your upper portion so it locks into place up there. And then you can use this 1-7/8" hitch ball to connect to a standard ball coupler.
You don't need to push this back down, you just leave it open. And what you'll do though is take your pin and with your pin, you'll go ahead and slide it through up here and clip it. And that'll hold it in the up position so it won't go down. You'll have your coupler on there. So there's two ways, it's a combo.
You can use it with either a lunette ring or just a regular ball coupler. And then to close this, just push it down, take our pin, slide it through and clip it. You're ready to go. If you notice back here, it is a bolt on installation. It is designed to bolt to the Curt Pintle Hook Mounting Plates. There are quite a few of those we sell, and these has the same dimensions that'll bolt up to the mounting plate. Comes with the included hardware right here to bolt it to that mounting plate. Those mounting plates, we do sell separate on our website. Just to let you know the dimensions on these holes back here, if we measure 'em, the width center to center, we're gonna measure. So from the center of center from one bolt hole to the other is 3-3/8". And the vertical from center bolt hole to center bolt hole this way is gonna be 1-3/4". The mounting holes are 9/16" diameter. Now the hitch ball we mentioned, this will let you easily, you can, this is a 1-7/8" size it comes with. They do also sell a 2" ball separately if you need a larger one or a 2-5/16" ball separately, you can swap the ball out by unloosening this nut, putting the other size in there. Those hitch balls we do sell separately on our website. The 2" ball goes by part number C48820 and the larger 2-5/16" ball C48830. This part is a strong forged steel construction. You can see it has a nice rust resistant finish on it. Uses a high gloss powder coat finish on the pintle hook. And then the ball you can see is a chrome plated hitch ball. We mentioned the safety pin up here, it is tethered, so it does, you don't lose it. And it's used to lock the handle into place. Again, the gross towing weight capacity, if you use it as a pintle hook, 16,000 pounds, if you're using it as a ball coupler, 6,000 pounds. But that's gonna do it for the review on the Curt Bolt On Combination Pintle and Ball Mount with the 1-7/8" Diameter Ball.
Average Customer Rating: 4.8 out of 5 stars (119 Customer Reviews)
This pintle hook and hitch ball combo lets you haul up to 6,000 lbs with the 1-7/8", chrome-plated hitch ball, or up to 16,000 lbs with the pintle. Includes hardware for a bolt-on installation. Powder coated forged steel resists rust.Your customer service, as provided by Trevor, should set the standard for your company. Service, as we all know, is sadly missing in this new era in our country. It is either a chat bot, some foreign person with no connection to the company you are dealing with, or A-I trying to make you believe its a person? Thank you E-trailer for offering far more than just a product. And special thanks to Trevor for that special service he gives to your customers.
A solid, high quality component. The ball hitch has a heavy duty threaded shaft to take high load stress. An added plus!
Quality, enough said ...quick shipping
Yall had just what I needed, good price, shipped timely, well done! Recommend!
Product was exactly as advertised. Fit perfectly works great.
The folks at etrailer couldn't have been more responsive to a customer. I placed the order on a Saturday for a project & had it delivered (in excellent condition for such a heavy package) by Tuesday afternoon. I'll be going to e- trailer for many other projects to come in sure. Highly recommended!
The drop hitch & pintle both arrived in a fast reasonable time. The drop hitch is built even ruggerder than I had anticipated. I strongly recommend anyone looking for these items that I purchased shouldn't hesitate & buy them from etailer,you won't be disappointed!
Great quality, well finished, solidly engineered product. impressed it far exceeded expectations.
Replacing a pintle hook on ex-military Land Rover with combo pintle/ball hitch.
Service provided was excellent.
Great Product, suggest to my friends.
I beat the heck out of this...no damage..Still works
The price and shipping i will rate perfect. The quality of the product is perfect. I would note that C45922 pintle hook does not fit with DM66134 channel mount. The channel is 2 7/8" wide in the center and the C45922 pintle hook is 3" wide at the mounting holes. I would recommend addressing this in the listed description of the channel. I quickly resolved this issue as i own a machine shop. Others may take issue with fitment. Overall both products rate excellent. I REALLY like the thickness of the channel bracket. The extra cost of the 20K hook combo was money well spent. The extra cost of the 21K channel was also money well spent.
Quality made hitch. Very solidly built. Latch Mechanism solid and the engage disengage spring tension solid and tight, but still easy to engage and disengage. Love how the locking pin is tethered to the hitch! Powder coat finish is thick with complete coverage through out hitch including under latches etc. product arrived within the second day of order.Was expecting it to take a week seeing how the shipping was free with my combined purchase. What a nice surprise! I highly recommend and am very satisfied with my purchase.
GREAT HITCH
I use this hitch almost daily pulling small 16-18 foot stock trailers and flat bed trailers with ring hitches. I would recommend this hitch to anyone pulling trailers in a work environment.
No problems with this product after a year of use. As part of the complete channel mount system, the lack of a 1 7/8” ball for the system is annoying.
DOES THE JOB ,GOOD QUALITY AND PRICING
Great product. Well worth the cost
Great quality product. Fast shipping
I own an M-1008 cucv military vehicle, I needed a pintle hitch for a military trailer and I also needed a ball hitch to tow my boat. what an awesome product it bolted in place of the military hitch and serves both my needs.
I've had a lot of pintle hooks, and this is one of the best so far. I love the channel mount system, which is very convenient, making the height easily adjustable when hooking to different trailers or trucks.
The product fits great. Hitch with the 1/2 inch hole was perfect for tapping a 9/16 NF thread for a set screw. This takes away the possibility of the hitch being stolen and totally eliminates hitch rattle in the receiver. The reason for the 4 star is due to poor painting in some areas. Left over paint worked well. Thank you Tiffany and etrailer.
The lead time on the hitch I wanted was 7 weeks! I needed a hitch immediately. With the expert insight of sales support, Tyra, she suggested combining two different Kurt hitches that not only provided me with the pintle hitch I wanted but also provided me with a 2” and 2-5/6” for other applications. Great job Tyra, I’m up and running and not waiting 7 weeks for a hitch!
Do you have a question about this Pintle Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tim
5/1/2022
Holding up perfectly