B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
(3615 reviews)
Price: $599.00
In Stock
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Item # BWGNRK1384
Our Price: $599.00
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (3615)
- Q & A (0)
- Photos
B and W Gooseneck Hitch - BWGNRK1384
- B and W
- Below the Bed
- 30000 lbs GTW
- Removable Ball - Stores in Hitch
- Wheel Well Release
- 7500 lbs TW
- Manual Ball Removal
- 2-5/16 Hitch Ball
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.
Features:
- Heavy-duty underbed hitch lets you tow your gooseneck trailer
- Complete truck bed access when you're not towing
- Remove ball from hitch, flip it upside down, and drop it back into hitch for storage
- 5/8" Thick, spring-loaded, steel locking pin on end of handle goes all the way through ball to secure it in place
- Access handle at rear driver's-side wheel well
- Single-piece, machined ball socket provides rugged durability
- Square ball base prevents ball from turning in hitch during hookup
- "Corners only" fit of stowed ball prevents grime buildup inside of hitch
- Specially designed accessories (sold separately) make it easy to customize the hitch to fit your needs
- Tow a 5th-wheel trailer with the B&W Companion hitch adapter
- Spring-loaded safety-chain hookups are built in
- Simple installation with included custom mounting kit
- No welding required
- Truck bed does not have to be removed
- 3-1/2" Diameter hole must be cut into bed
- Powder coated steel is sturdy and corrosion resistant
- Made in the USA
Specs:
- Gross towing weight: 30,000 lbs
- Vertical load limit: 7,500 lbs
- Ball size: 2-5/16"
- Limited lifetime warranty
Note: If your truck's suspension has a stabilizer in between the top of the differential housing and the frame, turning over the ball and stowing it in the socket could cause damage to your truck's suspension.
With the B&W Turnoverball underbed gooseneck trailer hitch you get the best of both worlds. When you go to tow, the Turnoverball creates a sturdy, dependable connection with your gooseneck trailer. And when you're done towing, you can stow the ball upside down in the hitch to get full bed access and a clean appearance.
Easy-to-Remove, Simple-to-Store Hitch Ball
The durable steel hitch ball included with the Turnoverball system secures in the hitch with a sturdy, 5/8" thick steel pin that is incorporated into the end of the operating handle. To lock the ball in place, drop it into the hitch hole in the bed of your truck. Then rotate the handle in your driver's-side wheel well counterclockwise until the latch engages. When the latch is engaged, the spring-loaded pin on the end of the handle will be inserted all the way through the base of the hitch ball, forming a strong, solid connection and ensuring absolute security when you're towing.
When you're done towing, remove the hitch ball by simply pulling the handle out as far as it will go and then rotating it clockwise until it unlatches. Remove the ball, flip it upside down, and drop it back into the ball hole of the hitch. Then reengage the latch to secure the stowed ball in place.
Unlike typical gooseneck balls - which have round bases - the Turnoverball hitch ball is designed with a square base. This makes latching the ball in the hitch easier because the base won't rotate inside of the hitch like a round base might, so lining the pin up is a snap. The base of the ball also fits tightly within the ball hole during storage. Because only the corners of the base contact the sides of the socket, any dirt or grime that gets into the hitch will fall through the socket, thus helping to prevent any buildup that could cause the ball to seize up in the hitch.
Simple, Custom Installation
This hitch is custom designed for your vehicle. The included mounting brackets bolt to existing holes in your truck's frame. While some modification is required - you will need to cut a 3-1/2" diameter hole in your bed for the hitch ball and drill holes for the built-in safety chain loops - there is no need to weld onto or to drill into your frame.
Once you have the hitch brackets and body installed, set up the operating handle. This handle is designed to be accessed from the rear driver's-side wheel well. On the end of the handle is the heavy-duty steel pin that secures the hitch ball.
B&W Turnoverball Gooseneck Hitch Accessories
B&W makes it easy to tow just about anything. With the many adapters and accessories available, the Turnoverball can be made to work with almost any gooseneck trailer. Hitch balls are available that have a built-in rise, an offset, and even a different connection type. Add on the Companion fifth-wheel hitch - which attaches directly to the Turnoverball with no other parts required - and you can tow your fifth-wheel trailer.
GNRK1384 B and W Turn Over Under Bed Gooseneck Trailer Hitch - 30,000 lbs
Installation Details
This Product Fits The Following Vehicles
- 2014 - 2018 Ram 2500 6-1/2 Foot Bed without OEM Prep Pkg
- 2014 - 2018 Ram 2500 8 Foot Bed without OEM Prep Pkg
- 2014 - 2014 Dodge Ram Pickup 2500 - 6-1/2 Foot Bed without OEM Prep Pkg
- 2014 - 2014 Dodge Ram Pickup 2500 - 8 Foot Bed without OEM Prep Pkg
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Defective
- Package not accepted
Customer Reviews
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs - BWGNRK1384
Average Customer Rating: 4.8 out of 5 stars (3615 Customer Reviews)
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.by: Leonard01/23/2021
2017 Ram 2500
This was my first order I placed with et etrailer. If one work could say it I guess it would perfect! I ordered on a Tuesday arrived on Thursday. I Placed the order got conformation and a name and contact to call if I had any issues, once it arrived I got another email letting me know if had been delivered. The installation video was perfect made it’s easy to install just followed the steps. When I need any trailer related items I will use them. As far as the B&W hitch i put it in a 2017 Ram 2500 with Ram boxes. The fit and quality of the hitch and design is what I have come to expect from B&W. I got this hitch to pull a gooseneck horse trailer. If your wondering if it will work with Ram Boxes it will.
by: Kamp & Co. Construction01/30/2024
Great product from a great company. B&W sets the bar when it comes to all things towing/trailer related. And etrailer.com compliments them very well with customer service. I have utilized my turnover set up for about a year now with no issues. the convince of having a gooseneck ball when needed but still having complete use of my bed space critical for me as a contractor. I am constantly using the bed of my truck to haul tools and light material from site to site but also on occasion have to pick up bulk materials or move equipment with our gooseneck. The turnover ball from B&W was exactly what we needed to remain versatile.
by: Jacob 05/24/2024
I can't review the product yet but I can review etrailer. They are great to deal with easy to order from and my hitch came way sooner than I expected. Great job.
by: Parks10/20/2022
This hitch worked flawlessly and the quality was excellent. I have sold the truck with the turnover ball hitch but bought another truck and a B&W slider hitch with pucks. Excellent products!!
Parks
10/21/2023
I no longer have the turnover ball hitch, but I did buy another truck and purchased a B&W slider hitch. Yes, they are heavy but that is a sign of quality! You do not want to be towing your campertrailer with a poor quality hitch. I feel confident with the B&W hitch. If you are concerned about the weight, get you an electric hoist to help remove the hitch. Its an inexpensive way to loadunload your B&W hitch and you can do it by yourself.
Mike L.
11/9/2023
@Parks We're glad to hear your # BWGNRK1384 B&W Turnover Ball hitch worked well while you had it!
by: Lawrence04/06/2020
Needed fifth whl installed, I dropped spare tire moved out of way, then sat in area under truck where spare tire sat. Marked and drilled center pilot hole, cut out ball hole inside bed. I did not remove exhaust or anything. Measured all for accuracy, and measured bed to verify turning capacity.Moved plate under bed, inside bed, put metal pipe on jack stands above center hole, tied wire from bottom plate up to rod in bed, pushed wire down, maneuvered plate on axle, used wire guide plate in location, tied off plate to hold it, tied wire around nut plate, pushed plate in, using wire to align it, used bolts for setup of nuts in location, removed bolts pushed plate back in location tightened bolts. In bed marked chain hooks, drilled and installed. Lubed up fifth, wheel attached handle release, applied herculin er on edges of hole,. Reinstalled all. 3.5 hrs install by 1 person. Ready for 5th wheel pull. Great price medium install level, need drill bits, air tools, jack, and plan the install.
by: Dave from buffalo12/14/2016
GMC Sierra
I have purchased 2 of these hitches. The first one was installed at my local shop. This time I decided to go at it myself in my garage. Super easy instructions made this a breeze. Took about an hour or so by myself to install. Love these hitches, super easy to operate and most of all with the flip over design BOOM the ball is completely gone and flush with the bed. I owned a gmc sierra 2500hd and installed a Pop-up hitch. Never again. The ball would not sit flush due to the slide arm running right into the exhaust pipe making a horrible rattlin sound when the ball was in the down position. Will never buy any other hitch but B and W again!!! Love this product.
by: Chris 04/18/2024
Dodge Ram Pickup
It works great. Installation was pretty easy. I put it on a Ram 2500.
by: Brent09/14/2019
Ordered on a Sunday evening and received it Wednesday. Install was straight forward and easy with a second pair of hands. The only problem I have is my exhaust is hitting the hitch plate and is causing a rattle. I faught with the exhaust longer then it took to install the hitch. I do have a 4 inch aftermarket exhaust and may go by a shop to see if it can be modified to clear the hitch. Haven't towed with it yet. I installed this to pull my fifth wheel with the reese goosebox.
by: Peter11/27/2021
2016 Ram 2500
I put B&W turnoverball on a 2016 Ram 2500 crew cab short bed diesel,it has the factory prep puck. The change over was pretty simple. I used the same studs and nuts that came with puck goose ball. Tbe only hard part was trying to pry the 4" exhaust pipe down to slide the B&W plate into position. It took me about 2 hours to install by myself. I am going to use a 4" offset ball so I can use a reese goosebox hitch for my 5th wheel.
by: Bill R08/06/2017
Solid product. Purchased to replace Draw tite 9067, which would not work with Draw tote Hi Rise 5th wheel adapter. Hitch installed exactly as instructions show, Only problem I had was breaking several still hits making holes for safety chain hooks. Seemed that the hits tend to bind up as they hit the next later of steel. Used a ratchet tie down as a second set of hands. I tightened the strap as I guided the hitch into place.
by: Dave C.08/18/2014
2014 Chevrolet Silverado 2500
Very happy with this product!! Installed on my brand new 2014 Dodge 2500 HD. Very easy to install, took me and a buddy, on a lift, about an hour and 20 mins total!! B&W really did there homework with this hitch and the ease of installation was amazing compared to some others I have dealt with. Absolutely recommend this product for do-it yourselfers!
by: Fred 02/09/2024
2018 Ram 2500
The installation was more difficult than I thought it would be, but the instructions were great, everything fit perfectly and works great
by: Mr. B07/20/2022
Great Customer Service!!! Great Product!!! Love the Installation Videos!! Very helpful!!
by: Sloan02/18/2024
2018 Ram 2500
Install went smoothly thanks to the tip’s the the installation video
by: Kevin 03/09/2024
2017 Ram 2500
Had hitch in 2 days very good quality also called with a question and was answered within minutes
by: Robert Hansen02/08/2020
Absolutely amazing, install was easy directions were detailed. The hitch is second to none as well as strainers service and shipping. I will never buy from anywhere else and I will only buy B&W products. I feel confident towing with it, no slop or play in the hitch and very strong.
by: Greg07/14/2023
This hitch has worked as expected. I pull a 16ft dump trailer with it and load it up. It was easy to install. My only gripe is the handle to pull to release the ball is a bit sharp and if I don't put a glove on is a bit harsh on the fingers. Round those edges up and its a winner.
by: Thomas10/24/2017
2016 Ram 2500
The product I received was not the model shown on the website and the instructions did not match the product either. I was able to install it fairly simply when all was said and done. It works great and is really nice to be able to remove the hitch so easily. There were a couple of missing pieces from the package that I never received.
by: Leonard07/05/2019
2016 Ram 2500
Great product! This is the second under bed turnover ball hitch that I have purchased from etrailer to go along with my companion 5th wheel hitch. I previously owned a 2004 Dodge Ram that I put the first one on, and most recently I put one on my 2016 Dodge Ram. Both applications took a little work, but were pretty much straight forward. B&W hitches are extremely well made and you won't be disappointed by purchasing one of them. I use my hitch to pull a 32' 5th wheel camper and it works great, no issues whatsoever.
by: Brad M.04/07/2014
Great customer service, my hitch and wiring harness was delivered the next day. The B&W Turnoverball model BWGNRK1384 was easy to install. Basically four bolts and it was in.
by: Angela 12/03/2023
Fit perfectly. video instructions made a big help .
by: Michael 03/20/2024
Was easy to install and works great.
by: Bret11/16/2017
Amazing! The installation instructions are great, the product is great, and I installed it in less than 90 min. Works like a champ and sooo much better than having to crawl under the truck to remove the ball.
by: Scott S04/02/2020
This was super easy to install, although the heavy plate was intimidating. I crafted a hoist with a 2x4 and some nylon rope, then pulled the plate into place, rolled the rope around the 2x4, and had a 2nd person start the bolts. I could have tied it off and had the same results by myself. Very solid product and can’t wait to pick up my 5th wheel!
by: Seth 08/21/2023
Very nice quality and quick shipping. Install was not too bad considering I did it alone with no lift. The ball tucks nice and discretely in the bed and does not hinder the use of the bed at all.
25
3591
Show More Reviews
See what our Experts say about this B and W Gooseneck Hitch
- Will The B&W Companion Slider 5TH Wheel RVK3405 Fit a 2017 Ram 2500? The B&W Companion Slider Base # BWRVB3405 will fit your 2017 Ram 2500 as long as you have the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1384. This gooseneck hitch is compatible for both the 6-1/2' and 8' bed lengths.
view full answer... - B&W Gooseneck Trailer Hitch for 2016 Ram 2500The B&W Turnoverball # BWGNRC920 is just the center section of the hitch, so you would need the installation kit as well for your 2016 Ram 2500, which you can get separately with the B&W Turnoverball Gooseneck Custom Installation Kit for Chevy/GMC # BWGNRM1020. However, I recommend getting the full hitch/install kit in one package with the B&W Turnoverball Underbed Gooseneck Trailer Hitch with Custom Installation Kit # BWGNRK1384. This is a confirmed fit for your 2016 Ram 2500, and I...
view full answer... - Solution for Towing Fifth Wheel Trailer with 2015 Ram with Square Gooseneck Hole in BedSince the hole for the gooseneck ball is square that would mean you have an aftermarket gooseneck hitch installed. Since it is square you might be in luck though. If you get under the truck bed and the hitch is painted gray like the B and W gooseneck part # BWGNRK1384 you can install a Companion hitch like part # BWRVK3500 and you'd have a really great hitch option. If you see that it's a different brand hitch let me know and maybe an adapter like part # CAB-C5G would be your best option.
view full answer... - Will a B&W Turnoverball Work on a 2014 Ram 2500 With Above Bed RailsIn order to install the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1384 on your 2014 Ram 2500 you will have no other option but to remove the above bed base rails you have now as they will not work with the B&W Turnoverball. That said, I think this is worth it because the B&W Turnoverball is largely considered to be one of the best gooseneck hitches on the market and you can easily go back and forth between gooseneck and 5th wheel trailers using the B&W Companion Slider...
view full answer... - Recommended Companion Hitch for a Dodge Truck w/ a B&W Turnover Ball Gooseneck Hitch Since your 2017 Ram 2500 already has the B&W Turnoverball System item # BWGNRK1384 you will want either the B&W Companion 5th Wheel Trailer Hitch item # BWRVK3500-5W you were looking at, or Item # BWRVK3400 for a sliding 5th wheel hitch. Both have a 20,000 lbs capacity. Both of these Companion hitches work with the square receiver on B&W's turnover ball gooseneck hitches. They are only compatible with B&W square gooseneck receivers. You can not use either hitch with a rotating pin box....
view full answer... - Comparing Pintle Hook and Gooseneck for Towing With 2015 Ram 2500A pintle hook combo like the Curt Pintle Hook with 2-5/16" Hitch Ball # C45922 and a gooseneck are very different applications and generally aren't comparable because they require such different applications and configurations for both your trailer and truck. Assuming you have a truck that is set up for both, a gooseneck application will absolutely be the way to go because it will be a more cost-effective option and will give you better ride quality when towing. You didn't state your...
view full answer... - Is the B&W Companion 5th Wheel Hitch Compatible With the Curt Underbed Gooseneck Trailer HitchI have solution for you, however, the Curt Underbed Gooseneck Trailer Hitch, # C60614, is not compatible with the B&W Companion 5th Wheel Hitch, # BWRVK3400. The gooseneck base for the Companion is squared shaped and will not fit the round hole in the Curt gooseneck hitch. The B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit, # BWGNRK1384, is confirmed to fit a 2015 Ram 2500 truck and will allow you to mount the B&W Companion hitch in your truck's bed.
view full answer... - Recommended Gooseneck Hitch for 2014 Ram 2500 Short Bed without OEM Prep PackageThe best solution to put a gooseneck hitch into your 2014 Ram 2500 short bed is the B&W Turnoverball Underbed Custom Gooseneck Hitch # BWGNRK1384. This hitch does not require any welding to the frame and comes with a custom installation kit to help ease the process. I really like the fact that you can flip the ball over and store it in the gooseneck ball mount, so you don't have to worry about misplacing it when its not in use. Going with the underbed mounted kit allows you to take advantage...
view full answer... - Recommended Gooseneck Hitch for 2014 Ram 2500 Limited with 6 Foot Bed and Ram BoxesIf your 2014 Ram 2500 Limited has Coil Springs, I recommend the B&W # BWGNRK1384 gooseneck hitch for your 6 foot bed with Ram Boxes on the side. This gooseneck hitch will have a 7,500 TW and a 30,000lb GTW. There will be no drilling to install the frame brackets of this installation kit. If you don't have coil spring then I recommend the Curt # C60614 gooseneck hitch, because it has the same towing capacities as the B&W gooseneck hitch. I have linked the above mentioned products to...
view full answer... - Recommended Gooseneck Hitch On 2014 Dodge Ram 2500 With Coil SpringsFor your 2014 Dodge Ram 2500 with no factory rail kit, I recommend the B and W Gooseneck, part # BWGNRK1384. This hitch is custom designed for your Dodge pickup. The mounting brackets that are included bolt to the existing holes in the truck frame and do not require welding or drilling of the truck frame. You will need to cut a 3-1/2 inch hole of your truck for the hitch ball and holes will need to be drilled for the safety chain loops. If you decide to change to a fifth-wheel at a...
view full answer... - Sliding Fifth Wheel Hitch Recommendation for 2017 Ram 2500 Short BedIf you are looking for a slider fifth wheel hitch to fit the factory pucks of your 2017 Ram 2500 the B and W Companion hitch slider part # BWRVK3670 is the way to go as it's the best hitch available. If you do not have the factory rail kit you'd need to go a different route though. For an underbed rail kit you'd want the B and W Turnoverball hitch part # BWGNRK1384 and then for a slider Companion hitch to fit this you'd want the part # BWRVK3400.
view full answer... - Gooseneck And Fifth Wheel Hitch Recommendations For 2017 Ram 2500 With A Short BedIdeally, you would buy your truck with the factory rail kit already installed. And to be honest, I recommend the long bed since you said you are going to tow a fifth wheel or gooseneck trailer. An 8 ft bed lets you make sharp turns when towing with no issue for clearance. If you purchase a short bed with the factory rail kit, and you want to tow a gooseneck trailer, I recommend The Curt Ball and Safety Chain Loops Kit # C60618. This kit comes with a ball with an easy-to-use lever and...
view full answer... - Which B and W Turnoverball Gooseneck Hitch Fits 2018 Ram 2500The B and W Turnoverball setup for a 2018 Ram 2500 is different enough from the kit that fit your Tundra had so an all new kit would be needed since none of the parts will transfer. So for that you'd need the part # BWGNRK1384 and you'd be set. I attached an install video for this for you to check out as well.
view full answer... - Recommended Underbed Gooseneck Trailer Hitch For 2016 Ram 2500For an under bed gooseneck hitch I recommend the B&W Turnoverball Underbed Gooseneck Trailer Hitch, part # BWGNRK1384. This comes with a custom installation kit. The hitch has spring-loaded safety-chain hookups built in. The hitch ball can be removed and flipped upside down in the hitch for storage when you are not towing. The gooseneck can be used with a Companion fifth wheel hitch if you ever need to tow a fifth wheel. If you need a wiring harness for your trailer I recommend part # 41157.
view full answer... - Gooseneck Hitches for 2016 Ram 2500We do have confirmed gooseneck hitch fits for the 2016 Ram 2500 short bed and long bed pickups that do not have the factory prep package. Available gooseneck hitches are shown on the linked page. # BWGNRK1384 from B&W # 9467 from Draw-Tite # C60614 from Curt Reese Hide-A-Goose Underbed Gooseneck Trailer Hitch head # 9464 is designed for use with either a custom-made rail kit or a vehicle-specific rail kit from Draw-Tite. It is not a complete hitch.
view full answer... - Fifth Wheel Rail and Gooseneck Hitch Recommendation for a 2014 Ram 2500 without Hitch PrepIf you are looking for a setup to provide you with both a gooseneck hitch and fifth wheel setup for your 2014 Ram 2500 the part # BWGNRK1384 is the way to go for a rail kit. This part number doubles as a gooseneck hitch and allows the installation of a B and W Companion hitch part # BWRVK3500 if you have a long bed truck or part # BWRVK3400 for if you have a short bed and need a slider for clearance when making tight turns.
view full answer... - Will Gooseneck Hitches Fit a 2016 Ram 2500 with Ram BoxesIf your 2016 Ram 2500 with the Ram Box has coil springs, I recommend the B&W # BWGNRK1384 gooseneck hitch for your 6 foot bed with Ram Boxes on the side. This gooseneck hitch will have a 7,500 TW and a 30,000lb GTW. There will be no drilling to install the frame brackets of this installation kit. If you don't have coil spring then I recommend the Curt # C60614 gooseneck hitch, because it has the same towing capacities as the B&W gooseneck hitch. I have linked the above mentioned products...
view full answer... - Recommended B&W Gooseneck Trailer Hitch Compatible with 2015 Ram 2500THe B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs # BWGNRK1384 is the correct hitch for your 2015 Ram 2500. This is compatible with the factory air ride or the aftermarket air springs like # F2598.
view full answer... - B and W Slider Hitch Solution for 2017 Ram 2500 without Factory Prep PackageThe only way you'd be able to use the B and W Companion Slider part # BWRVK3670 in the bed of your 2017 Ram 2500 would be if you went to a Ram dealer and had them install the prep package that you are currently missing. A simpler solution would be the Companion part # BWRVK3400 which fits the Turnoverball gooseneck hitches like the part # BWGNRK1384 that is fit for your truck. This is also an underbed rail kit but it doubles as a gooseneck hitch and is going to cost considerably less...
view full answer... - Gooseneck Hitch with Offset Hitch Ball for 2016 Ram 2500For your 2016 Ram 2500 we have a gooseneck hitch that has an offset ball available for it, but it's not the Curt you mentioned. Instead you'd want the B and W kit part # BWGNRK1384 which fits your truck and then the offfset ball # BWGNXA4085.
view full answer... - Recommended Gooseneck Hitch with Easy-to-Use Latch for 2018 Ram 2500The reason for the difference between the B&W Turnoverball Gooseneck Trailer Hitch # BWGNRK1309 (which is designed to fit the 2017 Ram 1500) and the B&W # BWGNRK1384 (for the 2018 Ram 2500) simply has to do with the way they need to install to the frame rails on each model. The two trucks are different enough that the same latch system on the 1500 model cannot be utilized on the later model 2500. I definitely understand valuing the convenience of this type of latch so if this is important...
view full answer... - Gooseneck Hitch Options for a 2015 Ram 2500The Hide-A-Goose Underbed Gooseneck Trailer Hitch # 9465 is the base unit and the only rails that go with it are for Ford and GM pickups. For your 2015 Ram 2500 we have the following options: Curt - # C60614 B&W - # BWGNRK1384 The Draw-Tite and Curt options have removable hitch balls but the B&W is the only one that allows you to store the hitch ball upside-down like the Draw-Tite you're asking about.I personally like the B&W the most just because you don't have to find a place to store...
view full answer... - B&W Turnoverball Underbed Gooseneck Hitch for 2015 RAM 2500 with RamBoxThe B&W Turnoverball Underbed Gooseneck Trailer Hitch - 30,000 lbs # BWGNRC920 is not a fit for your truck. Instead you will want the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs # BWGNRK1384. This has the same towing capacity and is a custom fit for your truck. I also recommend using wiring harness # 50-97-410 to put a 7-way in the bed of the truck for easy connection access. I've attached a video to assist.
view full answer... - Will the B&W Companion Sliding 5th Wheel Hitch Fit on a 2014 Ram 2500 Short BedThe B and W Companion Sliding Fifth Wheel Hitch, # BWRVK3500, will work on a 2014 Ram 2500 short bed as long you have a B and W Turnoverball gooseneck hitch installed on the truck. If you do not have a gooseneck hitch installed in your truck, then you can install the B and W Turnoverball Gooseneck Hitch, # BWGNRK1384. This hitch will allow you to use the Companion fifth wheel hitch and it would also give you the ability to tow a gooseneck trailer if the situation were to arise.
view full answer...
Do you have a question about this Gooseneck Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Installed by:
Jeff D
Installed by:
Ryan G
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Updated by:
Adele M
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Michael B
Updated by:
Noah M
Updated by:
Carrie F
Video by:
Zach D
Test Fit:
Brent H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Clayton O
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Leonard
1/24/2022
Great product still love it works great with my Ram Boxes. No issues ever