T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(193 reviews)
Price: $67.46
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118501
Retail:$105.80
Our Price: $67.46
You Save: 36%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (193)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 118501
- Custom Fit
- 4 Flat
- Trailer Hitch Wiring
- Tekonsha
- Powered Converter
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points in rear cargo area
- Plug in T-connector
- Run hot lead to car battery
- Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects directly to battery to avoid overloading vehicle's electrical system
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 2.1 amps per circuit
- Tail lights: 5.6 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side interior trim panels of your rear cargo area. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed within the spare tire compartment of your rear cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Powered Tail Light Converter
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118501 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite
Installation Details
This Product Fits The Following Vehicles
- 2010 - 2018 Hyundai Tucson
- 2010 - 2018 Hyundai Tucson
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118501
Average Customer Rating: 4.8 out of 5 stars (193 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.by: Andre 05/16/2023
Great product easy transaction , speedy delivery and easy installation
by: Shane 02/08/2024
Great customer service and fast delivery. The ladies on the phone were super knowledgeable & friendly. I haven't installed the hitch yet, but I'm sure that it is the exact fit.
by: Larry Giannecchini11/03/2020
I'm 70 years old and did the entire install myself other than running the power cable up to the battery from the rear bumper. I would have done that as well but couldn't fit under the vehicle without jacking it up. My local gas station did that for free in about 5 minutes. It went in easily. It is working fine. Very happy with the product. Would definitely recommend it to anyone.
by: Terry06/13/2023
I ordered the T-one Vehicle Wiring Harness for a 2013 Hyundai Tucson to put on my Mother-in-laws vehicle. The instructions were okay, but I just had to throw them out. After I removed the first piece that I was supposed to in order to run the wiring harness through, the wires wasn't long enough to reach the tail lights, and the hole was too big for the rubber piece that was on the harness. I ended up having to run the harness a different route and everything was mounted underneath the vehicle. Hopefully wet weather doesn't affect the functioning of the harness.
by: J.mauldin10/26/2019
2016 Hyundai Tucson
Wiring for the driver's side is about 3" too short, it's workable but close. The hitch went on very easily, about 20 minutes, and that was laying on the ground to install. I'm 70 years old and did it by myself. Great product.
The tester I26 made checking the wiring very easy.
Items arrived on time and I'm good condition. Very happy with my purchase.
by: RICE6002/14/2024
EASY INSTALL
SAVED SO MUCH $$ DOING IT OURSELVES
WORKS PERFECTLY
by: Rex 02/29/2024
2014 Hyundai Tucson
Great fast service quality products fast shipping
by: Carl06/21/2023
It is a great product.Perfectly fit my Tuscon and so easy to install myself.Thank you etrailer.
by: Justin 11/04/2022
Hyundai Tucson
I’m not very mechanically inclined, but MAN! This product was easy to install, and exactly what I needed. I used etrailers video to help with installation, and it was like having someone walk me through the process. Make sure you get a fish tape or something to help run the wire.
The product itself isn’t complex… if you want to add a harness for trailer lights to your Tucson, this is the kit. I have no complaints and am so glad I purchased from etrailers.
by: Ken08/22/2016
2012 Hyundai Tucson
This was clearly designed for my car (2012 Hyundai) as the wires were all the right lengths and the connectors snapped together easily and positively. The directions were surprisingly good. The only issue (a small one) was that the access hole they refer to was visible from under the car but not from the spare tire well as implied in the directions. It was easy to fish the wires through (a coat hanger or kids with small hands make it easy!) and into the trunk.
There was a delay in delivery, but I was contacted a couple of times to inform me of this and to assure me that it was soon to be on its way. I received it about two days later. Appreciated the note to let me know. The delay (about 5 days) was not an issue for me.
Highly recommended- both the product and etrailer.com.
Ken
11/1/2017
It has been trouble free and far better than the local trailer retailer harness that was originally installed and failed. I remain very happy.
by: Collin 05/30/2023
Everything installed very easily and the provided videos on the website was very helpful
by: Craig M.10/24/2016
I received the harness on time with three day shipping. It took about 1 1/2 hours to install. Any time I got confused, I watched your video. The directions are very good, but having the video for my vehicle made it a breeze!
The lights run off the car battery, instead of the existing wires, eliminating short circuits. 100% better than the $15 harness I was going to get.
The light plugs fit perfectly! NO SPLICING WIRES!
I highly recommend this harness!
Craig M.
10/24/2017
Just used a rental trailer last week. The harness actually got compliments on the the harness system from the rental employees for how neat the harness was! I told him I got it online at E-trailer.com. He will be a customer for sure.
by: MarkP09/05/2023
You guys have GREAT Customer Service. I like the products too
by: Lawrence09/23/2022
The wire harness has held up well. I have not had any issues with it working. After reviewing a video on how to remove the tail lights, the installation was simple and straightforward.
More important, I sumitted the wrong year of my car, hence the wrong harness. When brought to etrailers attention, they were chill about it and directed me to return the the harness and sending out the correct one.
Definitely my go to company for wiring harness needs.
by: Marc06/10/2017
2017 Hyundai Tucson
Everything was ok with this till you try to reinstall tail lights, The T connectors are close to one another and need more length to drop extra plug down into body,
Extra connector stops tail light from mounting between body and light fixture,
Other than that it's ok.
Marc
6/13/2018
Connector corroded before I could even use harness had to replace with another connector even with supplied cover. Other than that problem everything else is fine and still would buy from them again
by: Michael07/14/2021
2016 Hyundai Tucson
it for sure was not easy and all the videos were saying a 2016 but for sure not my 2016 was not as stated . sorry but poor rating , what was the problem as the whole that was for pulling up the wires had wires in that rubber , where you say to pull up I could not even put in a finger but did get the 4 prong connector threw after I pulled off a bunch of plastic that broke as it was not made to come off I think . then the black box was too big threw the whole and as far as the rest iot did not go better POOR would take pics to show how I just taped it to the out side , also that self taping screw I had to drill a hole first as here you said to put just did not work in that area
Brooke M.
7/20/2021
Thank you for your review! It seems like there is a little confusion with some of the installation steps. I took a look at the installation instructions and they do mention there could be an existing wire in the grommet. You will need to cut the rubber piece of the t-connector to allow the wire through. The instructions also address needing to drill a hole for the ground in step 8. And finally, the converter box will not go through the grommet hole, it will be taped in the cargo area like shown in the video at time stamp 04:40 of the 2015 Tucson installation video. If you continue watching the install video from there, you will see how and where they drill down the ground wire. I hope this helps!
by: C01/19/2020
2018 Hyundai Tucson
Trailer light harness for 2018 Tuscon works great! I installed my own way and are pleased with results. Could not find harness anywhere else. NOT EVEN DEALERS! Thanks etrailer
Christina G.
1/26/2021
Great.
by: ChasGK12/18/2016
Everything was as described. The videos were very helpful. The only point where I needed help (other than a second person helping during the install) was tightening the nut on the ball where it mounts to the tongue. This requires a LARGE wrench. A local muffler/radiator shop was glad to do it and didn't even charge me. I have used the hitch several times now and on one occasion pulled a U-Haul trailer full of furniture from south Florida to north Texas. On another occasion I pulled a trailer that was VERY heavily loaded with flooring about 50 miles over some very uneven roads. The hitch has always performed perfectly. Could not be happier with the product or the company.
by: James05/29/2018
2015 Hyundai Tucson
If, AND ONLY IF, you follow the instructions and install this the way they say, it works fantastically. In my 2015 Hyundai Tucson, I first installed this with the connector mounted in an enclosure and attached to my hitch, creating a more factory look for the harness. In order to do this, I had to leave the converter box mounted underneath the vehicle (instead of inside). It worked great for about a month, at which point the box got wet enough that water caused the connections inside to arc and it melted the converter box.
Round 2, I followed the instructions and installed the box inside the car and pull the wire out through the back hatch when I need it. It's worked great for the last year without any issues. I highly recommend, but only if you follow the instructions! The installation video is your friend!
by: William09/30/2022
This hitch is great! Very simple to install and it fit perfectly on my 2017 Hyundai Tucson. The wiring took a little bit of time but went together just as they said. I am thoroughly pleased with every step from buying to installing. Thank you etrailer!
by: Kevin S09/19/2015
2012 Hyundai Tucson
I installed this trailer wiring harness in my 2011 Hyandai Tucson this morning. The install went very well and my trailer lights work now. I was not sure I could do the job and was leaning to taking it to a shop and paying them to install a new wiring harness. After talking to Mike at etrailer he answered my questions and I decided to order and give it a go myself. The installation video on the 2012 Tucson was very clear and thorough and gave me the confidence I needed to start the job. Other than that my tail light assemblies took a lot more pulling to remove than in the video, it went just like the video. I like how the control unit is housed inside the car and not hanging in the rear fender like my old one where it was exposed to snow and road salt which eventually led to it failing. I am very pleased with the product, the price, delivery and the installation video. The only thing I did not use was the butt connector. I substituted a heat shrink butt connector as I think that is more weather proof and secure than a standard butt connector and electrical tape. I hope it lasts a long time. The installation videos are awesome.
by: William 07/18/2023
Awesome product fit perfectly not too difficult to install.
by: Donald02/23/2019
2013 Hyundai Tucson
So far this harness has not failed unlike the one I bought previously. I forget the brand name that failed but something in the black box caused problems with the Hyundai's electrical system.
Donald
2/24/2020
After being installed over a year I have not experienced any problems.
by: Joe M03/15/2013
After searching the web for a trailer hitch, I finally found etrailer. I was impressed with the products and prices offered, but it was the support that really got my attention. After pricing a new hitch at the dealers, I was going to get the hitch only, but the price was very expensive. Now this included it installed, but it was for just the hitch. Through etrailer, I purchased the hitch I wanted plus the wiring kit, the ball mount, the ball, and a mount cover. All this and it was still just a little over half of the dealer price. The support came when I emailed them expressing my concern over installing it myself. The expert advice I got and continued support, convinced me that it was possible. I really enjoyed tracking this order as it shows on a map the shipping origin and where the truck was as compared to the ending shipping destination. Because I live in NY and we still have snow on the ground and it is very cold, I have not installed it yet. It was very well packed and arrived in great shape. I have already told a friend about etrailer and I will definitly use them for any trailer needs I may need int the future.
25
193
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Recommended Wiring Harness for 2012 Hyundai TusconWe do have universal tail light wiring harnesses available, however for your 2012 Hyundai Tuscon, a powered converter module is required to safeguard the vehicle's wiring and to provide enough power for the trailer lights. Because of this, the universal kit that will include everything needed for installation is the Tekonsha ZCI Circuit Protected Wiring Harness # 119250KIT, which is actually less cost-efficient than the custom harnesses designed to fit your vehicle. For ease of installation...
view full answer... - Trailer Hitch Recommendation for 2017 Hyundai Tucson SportI think you gave them solid advice...but as far as if a trailer hitch will void the warranty that answer is no. When you install an aftermarket part on your vehicle like a trailer hitch in this case, you are protected by the Magnuson–Moss Warranty Act. This act states, in part, that unless the installation and the part caused a problem then the warranty cannot be voided. I recommend looking it up online. For a hitch I would recommend the Draw Tite part # 75836 which is a confirmed fit...
view full answer... - Trailer Hitch Recommendation for 2018 Hyundai Tucson for TowingFor your 2018 Hyundai Tucson the trailer hitch I recommend is the Draw Tite part # 75836 because it has the best towing capacities, is easy to install and has a concealed crosstube which means it will be less visible. I attached a picture to show you what it looks like installed and a link to an install video for you to check out as well. For trailer wiring you'd then want the T-One kit part # 118501 which is a custom fit which means the install won't require splicing and because it has...
view full answer...
- Troubleshooting 4-Pole Wiring That Lights Up LED Tester But Does Not Operate Trailer LightsA lighting tester that uses LEDs, like the one in your photo, will take very little power to illuminate. Test light LEDs are so sensitive that they will sometimes light up even when no signal is activated; this can occur from the low-level residual power that some wiring kits put out. The powered 4-pole trailer wiring harnesses available for your 2014 Hyundai Tucson include Curt product # C56348 and Tekonsha # 118501. If none of the trailer lights work, you can test to find the issue....
view full answer... - Does Curt Trailer Hitch Fit 2016 Hyundai Tucson Limited With Dual Exhaust TipsI checked with Curt and can verify that the Curt Trailer Hitch Receiver # C12241 is a fit for your 2016 Hyundai Tucson Limited with the dual exhaust tips. I also added a photo a customer sent in of this hitch on their Tucson Limited with the same exahust. I have added a link to the installation instructions as well as an install video for you to check out of the Curt Trailer Hitch Receiver # C12241. If you need a trailer wiring harness as well the correct fit is the T-One Vehicle Wiring...
view full answer...
- Troubleshooting Curt Trailer Wiring Harness Installed on 2010 Hyundai TucsonUnless your trailer is unusually well lit, the # C56348 wiring harness should have plenty of capacity. From your description, it sounds like your converter has an internal short that is allowing the 12-volt feed from the battery feed back into the vehicle taillights. You can confirm this by using a circuit tester like part # 40376 on the inputs of the converter. With the vehicle shut off, you should only see power on the 12-volt battery feed. If you find power on any of the other wires,...
view full answer... - Recommended Trailer Hitch and Wiring for 2018 Hyundai Tucson Sel PlusWhen we research towing capacities we base it off of what the owner's manual says but for some unknown reason there are no online manuals available for a 2018 Hyundai Tucson. I did take a look at the Hyundai website and as you said it listed the SEL Plus as having a 2,000 lb towing capacity as opposed to the 1,500 lb capacity of the SE and SEL; however, it looks like the SEL Plus only has some interior features differentiating it from the SE and SEL so it would not make sense for the capacity...
view full answer...
- Why is a Dedicated Power Wire Needed to Install Part # 118501 on a Hyundai TusconThe reason the T-One Vehicle Wiring Harness, # 118501 requires a power wire is that your Tuscon requires a harness that provides the power from the vehicle battery and keeps the amperage draw from the trailer lights off of the taillight circuits.The wiring harness uses the vehicles taillight circuits to trigger the lighting functions for the trailer but will not draw power from the taillight circuits to light the trailer lights. Running the power wire directly to the vehicles positive...
view full answer... - What Size Bolts Are Used When Installing The Curt Hitch # C13240 Onto A 2017 Hyundai Tucson When installing the Curt Trailer Hitch Receiver # C13240 onto your 2017 Hyundai Tucson the hitch uses quantity (8) M10 x 1.25 bolts. The trailer hitch has a bolt-on installation with no welding required. I like this hitch over the others that we sell because it is manufactured in The USA. When towing a trailer you will also need the T-One Vehicle Wiring Harness # 118501. I like this harness over the Curt harness because it has a more reliable powered converter box that will give it a...
view full answer... - Does the Hitch and Wiring for the 2011 Hyundai Tucson Fit the 2012 ModelAccording to Curt Manufacturing, the Class III Receiver, part # C13120 is a fit for your 2012. The Tow Ready T-One Vehicle Wiring Harness, # 118501, will also fit the 2012 Hyundai Tucson. I have attached installation videos for the hitch and the wiring harness on a 2012 Tucson for you to check out. In addition to the receiver hitch and wiring harness, you might also need the following: Ball Mount, part # D-4 Hitch Pin and Clip, # PC3 1-7/8 Inch Trailer Ball, part # 19260 2 Inch Trailer...
view full answer... - No-Splice 4 Way Trailer Wiring Harness For 2017 Hyundai TusconIf your 2017 Hyundai Tuscon doesn't already have a 4 way flat trailer plug at the back of the vehicle near the hitch, then you will need to install one so that the trailer's 4 way plug can connect to your vehicle. You can use a kit like T-One Vehicle Wiring Harness # 118501 which does NOT require any splicing since it utilizes your Tuscon's factory connectors. If you are referring to using a universal trailer wiring harness to tap into the Tuscon's wiring system, then I don't recommend...
view full answer... - Recommended Trailer Wiring Harness and Brake Controller for 2011 Hyundai Tucson You are correct in that there are two trailer wiring harnesses available that are confirmed to fit your 2011 Hyundai Tucson; the Tekonsha T-One # 118501 and the Curt T-Connector # C56348. Both of these harnesses will install the same way on your vehicle and the only real difference between the two is the manufacturer. I recommend going with the Tekonsha T-One Vehicle Wiring Harness # 118501, as Tekonsha is well-known for producing reliable electrical products. I have attached an installation...
view full answer... - Parts Needed to Add Light Kit to Curt Cargo Carrier # C18151What I recommend for Curt cargo carrier # C18151 is light kit # 20174. To mount the lights you will also need 2 of bracket # BK70BB. You can use self-tapping screws to secure the brackets to the top, rear rail of the carrier. This set up is the most cost effective option. It would plug into a 4-way trailer wiring connector. Which if you didn't have that on your 2014 Hyundai Tucson you'd need the part # 118501 as well. I attached an install video for this kit for you to check out as well.
view full answer... - Will Draw-Tite Trailer Hitch 36572 Fit a 2017 Hyundai Tucson LimitedOn Draw-Tite trailer hitch # 36572 for the 2017 Hyundai Tucson the cross tube will be above the exhaust tips so the 2 pipes on your 2017 will not be a problem. It will install similarly to the video on the 2016 you mentioned and that I have linked for you. If you plan on doing some towing the recommended ball mount is # 36051. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring you can use # 118501 to add a 4-Way flat connector to the rear of the vehicle.
view full answer... - Trailer Hitch Tongue Weight Recommendation For A 2018 Hyundai TucsonEven Though The Curt Trailer Hitch Receiver # C13240 is rated for a 525 pound tongue weight, since your vehicle's manual states that you have a maximum tongue weight of 220 pounds you 100% can not exceed the 220 pounds. So I do not recommend hauling around your dirt bike carrier because it exceeds the 220 pounds. You also would have to add the weight of the dirt bike added onto the carrier and that would more than double the maximum tongue weight for your 2019 Hyundai Tucson. There will...
view full answer...
- Trailer Hitch and Wiring for a 2016 Hyundai TucsonYes, the Draw-Tite trailer hitch # 75836 will fit your 2016 Hyundai Tucson. I have included a link to the installation instructions for you. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow...
view full answer... - Trailer Hitch and Wiring for a 2016 Hyundai TucsonTrailer wiring harnesses for your 2016 Hyundai Tucson, # C56348 and # 118501, both install the same way. They connect to the vehicle in 3 places: behind each of the tail lights and to the battery. The power wire has to be connected to the vehicle battery because no other 12 volt power source is appropriately rated for this application. I have included a link to our help article with tips on routing the power wire. If you do not already have a trailer hitch then you could use # C13240....
view full answer... - Troubleshooting Trailer Connector on 2016 Hyundai Tucson Not Sending PowerIt sounds like there is a problem with the OEM wiring on your 2016 Hyundai Tucson. You can try following the wiring that is giving you issues to see if there is damage and check your fuses. If you have a lot of lights on your trailer you may be overloading the circuit which is causing a fuse to blow. If the fuses and wiring looks good then I recommend installing the Tekonsha T-One # 118501 so that you bypass the OEM wiring. This plugs in behind your tail lights and then draws power directly...
view full answer... - Draw-Tite Hitch That Fits 2017 Hyundai TucsonThere are hitches that fit your 2017 Hyundai Tucson, but the part number you mentioned is not one of them. I recommend the Draw-Tite Max-Frame # 75836, which is a Class III hitch with a towing capacity of 3,500 lbs and a tongue weight capacity of 525 lbs. This hitch is a bolt-on installation so no drilling is required. If you plan on towing, you will need a 4-flat connector, # 118501, and a ball and mount. I recommend checking out Ball Mount Kit # 989900, which may fulfill your towing...
view full answer...
- Is there Any Drilling or Modification Needed to Install Curt Hitch C13120 on a 2010 Hyundai TucsonIt is true. The Curt Trailer Hitch, # C13120, does not require any drilling, trimming, or modifying any factory part of the 2010 Hyundai Tucson. It is a simple bolt on installation. I have attached the installation instructions below. Some items you may need to complete your towing set-up are listed below. Drawbar # C45010 Hitch Ball # 19260 or # 63845 Pin and Clip # PC3 Hitch Lock # e98880 Wiring # 118501
view full answer... - Recommended Trailer Hitch Receiver and Towing Accessories For 2017 Hyundai TucsonThe Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13240 is a confirmed fit for your 2017 Hyundai Tucson Limited. I have attached the installation video on a 2016 model which will be an identical install on your 2017 model. This is a very nice rust resistant black powder coat with a concealed cross tube. If you will be using this receiver for a bike rack or other accessory, Curt requires a stabilization strap # 18050. If you will be using this hitch receiver for towing,...
view full answer... - 7-Way Trailer Wiring Recommendation for 2011 Hyundai TucsonI have an easier way to install a 7-way in your 2011 Hyundai Tucson but not with the 7-way you mentioned. You'll need to start with a 4-way like the part # 118501 which is a confirmed fit. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install...
view full answer... - Trailer Hitch Fit for 2018 Hyundai TucsonThe Draw-Tite Trailer Hitch # 75772 that fit your 2013 Hyundai Santa Fe will not fit your brand new 2018 Hyundai Tucson. Not to worry though because there is a Class III, 2" hitch that does fit the '18 Tucson, the Draw-Tite # 75836; I have added a photo showing exactly how this hitch will look when installed on an '18 Tucson so you can check out how your car will look when it has this hitch on. The # 75836 will be mostly concealed but it won't require any type of trimming into your new...
view full answer...
- Can I Run the 12 V Power for the Tekonsha T One Wiring Harness Inside My 2011 Hyundai Tuscon? We get this question commonly and the answer is yes and no. You can run the powerline however you want so long as it gets to the battery on your 2011 Hyundai Tucson. The Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118501 needs a dedicated 12 volt power source to function correctly. You can not run this harness to an interior fuse box. That will damage the ModuLite and eventually fry your fuses.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Shane T
Test Fit:
Andrew S
Test Fit:
Shane H
Test Fit:
Clayton O
Video by:
Ian M
Video by:
Andrew K
Video by:
Kathleen M
Video by:
Jonathan Y
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Joshua S
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Andre
5/17/2024
Thank you for reaching out. The only issue with the trailer hitch is that the rear muffler does not have enough clearance and Knocks against the hitch mounting brackets on the passenger side of the vehicle. Any advice or direction to remedy this would be greatly appreciated. Kind regards