Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector - Chevrolet/GMC
(469 reviews)
Price: $53.27
Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector - Chevrolet/GMC
Item # HM11141144
Retail:$61.12
Our Price: $53.27
You Save: 13%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (469)
- Q & A (0)
- Videos (13)
- Photos
Hopkins Custom Fit Vehicle Wiring - HM11141144
- Custom Fit
- 4 Flat
- 7 Round - Blade
- Trailer Hitch Wiring
- Hopkins
- No Converter
This trailer connector provides multiple towing options for your vehicle without a factory tow package. It includes 7-way, RV-style and 4-way flat sockets, and it connects to your truck's bare factory wiring.
Features:
- 7-Pole and 4-pole harness lets you plug your trailer wiring into your vehicle
- Pre-wired harness connects to your truck's bare factory wiring
- Hinged lids keep out dirt and debris
- Impact-resistant, ABS plastic construction
11141144 Hopkins Multi-Tow 7 RV Blade and 4 Wire Flat Trailer Wiring Connector
Installation Details
This Product Fits The Following Vehicles
- 2015 - 2025 GMC Canyon
- 2015 - 2024 GMC Canyon without factory 7-Way
- 2015 - 2024 GMC Canyon without factory Tow Package
- 2015 - 2025 Chevrolet Colorado
- 2015 - 2024 Chevrolet Colorado without factory 7-Way
- 2015 - 2024 Chevrolet Colorado without factory Tow Package
California residents: click here
Video of Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector - Chevrolet/GMC
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Hopkins Multi-Tow Trailer Connector Installation - 2022 Chevrolet Colorado
Hi there Chevy owners. Today nears 2022 Chevrolet Colorado. We're gonna be taking a look at and showing you how to install Hopkins custom fit vehicle wiring harness. And this is what our harness looks like when it's installed. You can see this is gonna pop right in to the factory location where your factory connector would be. So this is a great option for installing one on a vehicle that doesn't have it cause it'll hook to the blunt cut wires located below.
Or if you happen to damage your connector here while working, maybe something slammed into your factory one. You can also use this harness as a replacement harness to get that fixed on that vehicle as well. It's gonna be exactly like the factory one on top. You'll have your seven way connector. It's gonna be a spring loaded latch on there that has a seal on the inside to keep out dirt, debris, and moisture.
And on bottom we've got a four pole connector so you can hook up to just about any trailer. And this one also is spring loaded with seals as well. We'll begin our insulation here at the back of the vehicle on the driver's side just here on the side of the frame rail. You'll find all of your blunt cut wiring for hooking up your connector here at the back. It is gonna be wrapped in electrical tape.
I went ahead and already pulled that tape off of here and then I went and just kind of pushed all the wires apart so we can make our connections. We're gonna go ahead and start with our power wire. Just get that one out of the way. That's gonna be the orange one. This is gonna be live so you don't want to touch that against any metal surface.
It's not gonna be able to shock you but if you touch this against anything metal after you strip it off, it will make a little spark show for you and you don't want that to happen. That's gonna hook to the red wire here on the harness that we've got. So I'm gonna go ahead and have this side strip back and ready. Then we're gonna grab our cutters. You can just strip it back right on the piece here but we don't want all that wire exposed so we're gonna cut some of this off first. I'm gonna basically cut it with just a hair of it left on there, something like this and then we'll use our strippers now to strip that back. And be careful too with your strippers. These are metal too, so if your strippers are touching the wire and they touch something metal you will also have a little light show. So we're gonna come up in here now and strip this back. Now that's our live wire. So now we're gonna think about connector and this actually isn't the ones that come in your kit. You can just get regular butt connectors in your kit and I would recommend not using any of those because they will not seal up. So moisture's gonna be able to get down on 'em which can cause corrosion and can lead to premature failure. So if you want a long lasting connection here on your connector without that's not gonna give you issues down the road. I'd recommend upgrading to these heat shrink butt connectors. We do sell these here at etrailer so you can get those to seal up your wiring. We're gonna slide our butt connector on and crimp it onto the wire. We can then grab our other end here. We already stripped back the red cause that is gonna be the power wire for our connector side. So we'll get our crimpers in place there slide our red wire in and then make our connection. All right, so we've got that one connected. At this point we're gonna do the same thing for each of our wires and making sure that we hook up each one to the correct circuit there. So I'm gonna go ahead and get 'em all connected and then we'll just show you which color from your harness will connect to which color here on the vehicle. All right, so we've made the rest of our connections here. So the first one we did was our orange to red. That's our power circuit. Next, the white wire that comes with the harness here actually has a ring terminal on it for connecting it to ground. We actually just cut that off and I just kind of slid it into the harness and re taped it up and then connected it to the black wire. That's the ground circuit on the vehicle. We've got our brown circuit which is our taillight circuit that just goes brown to brown green which is right turn that just goes green to green. You've got blue, which is your brake controller output that's just blue to blue. And we've got our yellow circuit which is our left turn, that's just yellow to yellow. And last we have our reverse light circuit which is gonna be purple on the new harness to gray on the vehicle. Once we've got all those connections made we're gonna grab our heat gun now and shrink 'em all down. With everything wired over here we can now install our connector. Now there's typically gonna be a just a plastic cover there. Our customer had already removed it. To remove it there are a couple of little prongs just like this on the inside. So you can just give those a squeeze and push that thing out. So now we'll take our new one. You'll want the connector towards the top. That'll just press into place. You'll hear it click in. Before we plug our connector into the back side of it, we're gonna put some dielectric grease on it. That'll just help keep moisture from getting in there and causing corrosion. Just give a nice little thorough coat there. Line up your connector and plug it in. And now at this point we can plug in our tester and make sure everything's working. So we plugged in our tester back there. We just gonna run through all of our lights. I did turn the ignition towards the on position and you can see the clearance lights are already lit up. We'll check our turn signals. There's our left turn, our right turn also hit our brakes. We can see those light up. In the top right corner you'll see that the voltage gauge is showing battery voltage as well. So we can see our auxiliary circuits working. I'm gonna have to start the vehicle to put it in reverse to get the reverse lights to work. And now you should see the reverse lights working there. And lastly, you would check your brake controller output but our customer doesn't have a brake controller installed so we won't have a way to test this. But this one should also be working. The rest of yours are working and the likelihood of that working is also gonna be good. And that completes our installation of Hopkins custom fit vehicle wiring harness on our 2022 Chevrolet Colorado..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector - Chevrolet/GMC - HM11141144
Average Customer Rating: 4.8 out of 5 stars (469 Customer Reviews)
This trailer connector provides multiple towing options for your vehicle without a factory tow package. It includes 7-way, RV-style and 4-way flat sockets, and it connects to your truck's bare factory wiring.by: Cory 05/22/2024
The service was fast and the parts were exactly as described. The quality of the hitch and the wiring harness were excellent. I will definitely use etrailer again.
by: Patrick07/01/2023
2022 Chevrolet Colorado
I had read that the wires were a little short, but once I got everything connected up they were just fine. It was really easy to install and it looks like the factory installed ones. I did un-tape the harness and cut the ground wire to the length of the other wires then I tucked it in the insulation and taped it all up again before I connected it to the trucks wiring harness.
by: Costi03/08/2024
The wiring harness and plug worked really well for install on my 2018 Colorado WT. I did upgrade the butt-connectors for the install, but the instructions were straightforward and went smoothly overall, with everything needed being included.
by: Robert 05/25/2024
2020 GMC Canyon
Great Company and I like shopping on their web site. Shipping was fast. I like that they have installation videos on their site. Really helps me out.
by: Freddie 03/21/2024
Chevrolet Colorado
Fit perfect in my 2023 Colorado. The factory original "blank" came right out and all I had to do was plug in my new connector and slide it right back into the factory opening in the bumper. Only tools I needed were my two hands. I have made a few purchases from etrailer and have always been very satisfied.
by: James 02/29/2024
The wiring harness was great. It was easy to connect, and the instructions were straight forward, and easy to understand.
by: John D04/04/2023
Great products and great service!!
John D.
5/8/2024
Have had no issues!!
by: Tim11/12/2023
2023 Chevrolet Silverado 2500
I am over 70 yrs old and have never had delivery service this good my wife and I can not believe the tracking system that you and UPS have developed and use.i ordered a fifth wheel hitch brackets , rails and a electrical 7 way plug. All was scheduled for tuesday and we got everything saturday. I give you 10 stars not 5. George was awesome keeping us up to date. Will recommend etrailer to everyone
by: Sam08/23/2021
2019 Chevrolet Colorado
Exactly like the original. Truck came with a empty plug. Easy to wire up and install. You can see it to the left of license plate. Just like factory made.
Sam
8/24/2022
Still working as it should. Whats not to like about that? Easy to install on my 2019 Colorado WT that didnt come with hitch or trailer wiring. Im 72 yrs. old, so if I can install it. Anyone can!
by: Brad 10/08/2023
Works as expected. Used Harbor Freight heat shrink electrical connectors for better install. I think that for the money this kit costs
that it should come with the heat shrink connectors. 2020 Colorado
by: David R04/13/2024
Very easy to install. It comes with all the connections so no need to by anything else. It fit great into my stock bumper.
by: Steve 02/18/2024
What we needed to finish a hitch install for a customer.
by: Jim04/17/2020
I would like to thank the folks at Etrailer for all your help and a great product.
The video on the website made my installation a breeze.
I will use the video on installing the trailer light hook up as well.
Attached is a couple of pictures of the
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Thanks again
by: Bobby S05/24/2024
Perfect fit and easy to install..love the fast shipping also
by: Wesley 02/05/2024
Perfect fit and proper wiring diagram!
by: Duane05/11/2024
2022 GMC Canyon
One stop shopping for trailering components. Helpful videos and clear instructions. Quick shipping too.
by: Duey in TR08/04/2020
Wired a 7/4 way to 2017 Colorado...
quick AND easy!!! The colored wiring diagram was accurate.....
The only problem I had was eventually figuring out the Pollak 12-741EV tester you sold me had to be plugged in with the test light indicators facing downwards. A hand held mirror placed under the plugged in 7 way tester did the trick,
and BTW the 7/4 connector only installs one way:
7 pole round on top and 4 pole flat on the bottom.
by: Glenn 04/11/2024
Very professional, excellent product knowledge, easy to navigate website.
by: AG08/13/2023
Works great after one year of use. Easy installation if you remember to tie down your rear bumper so it doesn’t fall on your head while working.
by: Marty 04/09/2024
2015 Chevrolet Silverado 1500
Ordering was easy,quick and arrived on time. The quality of the product meets today’s standard's.
by: Michael 03/30/2024
2022 GMC Canyon
perfect fit, easy to install.
by: Daniel 08/18/2023
2022 Ford Flex
Looks like it was factory installed. My truck had a wire for the ground so I tucked the white wire inside the flex tubing with the other wires and cut it to the same length as the others. It ended up being a neat looking installation.
by: Clay04/12/2024
2020 Chevrolet Colorado
Super fast service in shipping my order out.
by: Chris 04/02/2024
super easy to install. looks like factory install.
25
469
Show More Reviews
See what our Experts say about this Hopkins Custom Fit Vehicle Wiring
- Hole Size Needed for Mounting Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer ConnectorThe Hopkins 7-way part # HM11141144 that you referenced normally fits a bracket like the part # HM40978 which I attached a picture that shows all of the dimensions of.
view full answer...
- What are the Gauges of the Wires for the Hopkins # HM11141144The colors for the wires of the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector # HM11141144 have the following gauges: Green - 16 Red - 16 Purple - 16 Yellow - 16 Blue - 14 Black - 14 White - 12
view full answer... - Brake Controller Recommendation and Installation 2019 Chevy ColoradoA brake controller isn't a vehicle specific item, just about any controller will work on just about any vehicle. There are two types of controllers, a time-delayed and a proportional. A time delayed controller will send the same amount of pre-set voltage to the trailer brakes according to how it's been set. Whether the braking event is a quick tap on the pedal or a panic stop, the controller will send the same amount of voltage to the brakes. A proportional controller will determine...
view full answer... - Will the Curt Spectrum C51170 Fit a 2018 Chevy Colorado Z71?The Curt Spectrum Trailer Brake Controller # C51170 will definitely fit your 2018 Chevy Colorado Z71. There is not a plug under the dash, but the wires are run, making the install pretty easy. The # C51515 will attach directly to these wires and will then plug directly into the back of the # C51170. If you do not have 7 Way on the back of the vehicle, I suggest the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector # HM11141144. I included install videos of both of these being...
view full answer... - Hitch Receiver and Wiring Harness for a 2022 GMC Canyon Yes, we do have a hitch receiver that will fit your 2022 GMC Canyon. It is the Curt Trailer Hitch Receiver item # C13203. This is a custom fit hitch receiver that bolts directly to your frame with included hardware. It requires no welding or drilling. The only thing you will have to do is remove the cross member that came in place of a factory hitch. If you are in need of a wiring harness I recommend the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector - Chevrolet/GMC item...
view full answer... - 7-Way/4-Way Kit for 2019 Jeep Cherokee Trailhawk Similar to Factory Wiring SetupI looked up the factory hitch and wiring kit for your 2019 Jeep Cherokee and the style of connector is the # HM11141144 which you could install on your vehicle but you'd want to use the 4-way kit part # C56406 as an easy way to get the trailer taillight functions first. This is custom fit for your vehicle and you could cut off the 4-way so that you could wire the harness to the 7-way and you'd be set.
view full answer... - Why Does Crossmember On 2021 Chevrolet Colorado Need To Be Removed To Install Trailer Hitch ReceiverThe reason the crossmember on your 2021 Chevrolet Colorado needs to be removed is it takes up the exact same space as the trailer hitch receiver, in this case the etrailer Trailer Hitch Receiver # e98909 you purchased, and uses the same mounting holes. There would not be a way to use both at the same time. The crossmember is only installed on vehicles without a factory trailer hitch receiver, and with the trailer hitch receiver installed you will have the exact same strength and support...
view full answer... - Where Are the Brake Controller Wires On a 2019 GMC CanyonThe brake controller wires for a brake controller like the Tekonsha Prodigy P2 Trailer Brake Controller part # 90885 on your 2019 GMC Canyon should be located under the driver side kick panel next to the emergency brake pedal. These wires will be taped to one another and most likely tucked under another bundle of wires. If you take a look at the install video on a similar 2017 Chevy Colorado you will be able to see the wires revealed at around the 3:45 mark. Please note if you don't already...
view full answer... - Do I Replace U-Shaped Bracket on Underside of 2020 Chevy Colorado for Hitch InstallThe "U" shaped bracket we remove from under the vehicle on the linked install video of the etrailer Trailer Hitch Receiver # e98909 for a 2020 Chevy Colorado is removed and discarded which is why you're having trouble getting it to fit back in place. We actually call this out around the 4:00 minute mark in the video. If you're looking to use the Colorado for towing purposes you'll also need the Hopkins Wiring Kit # HM11141144 and a ball mount like the B&W Tow & Stow # BWTS10048B. Attached...
view full answer... - Does Redarc Tow-Pro Elite Trailer Brake Controller Fit 2019 Chevy ColoradoYes, the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR will absolutely fit and work in a 2019 Chevy Colorado. If you have the factory 7-way you don't need any other parts, but if you do not then you will need to add a 7-way with the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector - Chevrolet/GMC # HM11141144. The Tow-Pro Elite is one of the best brake controllers available and our customers love it because of its control knob which keeps a cumbersome unit out...
view full answer... - What is the Difference in the Curt and etrailer Hitches for a 2022 Chevy Colorado?The only difference in the Curt item # C13176 and the etrailer item # e98909 is the finish and the cost. Both hitches are manufactured by Curt to the same standards and specifications. I prefer the etrailer hitch item # e98909 because of its flat matte finish. It tends to blend in better beneath a vehicle's trim then the glossy finish of the Curt item # C13176. Both of these hitches are confirmed to fit the 2022 Chevy Colorado. I have linked a couple of installation videos below so you...
view full answer... - Trailer Hitch Receiver and Vehicle Wiring Harness For a 2024 GMC Canyon Without Factory Tow PackageAbsolutely, to install trailer wiring on your 2024 GMC Canyon you will need the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector # HM11141144. This uses a factory style connector so you will be able to place the connector easily in place of the factory cover on your bumper. Then you will simply wire in the included pigtail to the wires located behind your rear bumper. The Curt Trailer Hitch Receiver # C78VV you found is confirmed to fit your Canyon. If you are needing a...
view full answer... - Recommended Hitch and Wiring Harness for a 2021 GMC Canyon The best hitch for your 2021 GMC Canyon is going to be the etrailer Hitch item # e98909. This hitch is custom fit and bolts to your Canyon with included hardware. This is a class III hitch with a 2" receiver. It will definitely get the 7,000 lbs towing capacity out of your truck as it is rated for 8,000 lbs. For a wiring harness, I recommend the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector item # HM11141144. This harness has both a 4-way and 7-way connector. I have linked...
view full answer... - Adding a 4-Way/7-Way Connector To a 2019 Toyota Tacoma To Fit Factory Bumper CutoutYes, the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector # HM11141144 can be installed on your 2019 Toyota Tacoma. As in the video which I have linked below he splices the new connector in place of a 4-way like the Vehicle Wiring Harness # C56349. If you do not have any trailer wiring I recommend installing the Tekonsha OEM Replacement Vehicle Wiring Harness # 22117 and replacing the end with the Connector # HM40975. This will give you the same end connector along with the...
view full answer... - Troubleshooting SH Error Code On Tekonsha Prodigy P2 After Install On 2022 Chevrolet ColoradoThe SH code is saying the blue wire leaving the controller is connecting to ground some where after the Tekonsha Prodigy P2 Trailer Brake Controller # 90885. Typically this occurs either at the wiring connector for the brake controller or at the 7-Way # HM11141144. You can remove the connectors to verify you do not see any damage to the pins. This can also help you to determine if the issue is inside the 7-way connector if the error goes away after you remove the 7-way. If you have a...
view full answer... - Trailer Connector for a 2017 Toyota Tacoma with Both 4 and 7-Way Connection PointsI do have an option that will give you both 4 and 7-way trailer connection points on the rear of your 2017 Toyota Tacoma but the Hopkins Multi-Tow part # HM11141144 will not work for you. This trailer connector is designed for GM vehicles and will not fit your Tacoma. In order to get both 4 and 7-way connection points on your truck you will need to use the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter part # 22117 and replace the 7-way plug in the kit with...
view full answer... - In Bed Trailer Wiring For 2021 Chevrolet Silverado 2500HDYou will actually be needing the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness # HM54FR for your 2021 Chevrolet Silverado 2500HD. This will ensure you have the correct wiring and length needed to install in your truck bedside. The # HM11141144 is for a Chevrolet Colorado.
view full answer... - Wire Gauge and Color Connection to Vehicle for Hopkins 7-Way Trailer Connector # HM11141144The Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector - Chevrolet/GMC # HM11141144 will connect the following way: harness color to vehicle color--I've attached a photo to assist. white to black brown to brown yellow to yellow green to green purple to gray blue to blue red to orange The wires are 12 gauge for white, blue, and red. They are 14 gauge for the other function colors. The kit comes with the butt connectors and dielectric grease for installation.
view full answer...
- Color Code for Wires on Hopkins Multi-Tow 7-Way Blade Trailer Connector # HM11141144The white wire on the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Connector # HM11141144 that you referenced is for ground. This wire simply needs to be attached to a clean, bare metal surface on the vehicle's frame. The white ground wire from the trailer side connector will also be attached a clean bare metal surface on the trailer frame. The remaining wire functions on the Hopkins 7-Way are as follows: Brown - Running Lights Yellow - Left Turn/Brake Light Green - Right Turn/Brake...
view full answer...
- Trailer Hitch Receiver and Vehicle Wiring Harness For a 2021 Chevrolet Colorado The Curt Trailer Hitch Receiver # C13176 is confirmed to fit all models of the 2021 Chevrolet Colorado. This class III receiver is capable of a tongue weight of 800lbs and towing 8,000lbs. With a weight distribution hitch you can have up to 1,000lbs of tongue weight and 10,000lbs towing. Consult your local dealership for your exact towing capabilities of your Colorado and do not exceed the maximum rating of either the vehicle or receiver, whichever is lower. I recommend the Hopkins Multi-Tow...
view full answer... - Is Wiring Harness/Adapter Needed to Install Brake Controller on 2017 Chevy ColoradoThe 2017 Chevy Colorado doesn't use a plug-in connector, but it does have a tow package wiring harness under the dash that the controller would wire directly into. The harness is located behind the driver's side kick panel. The controller would install as shown in the linked video. The pigtail included with the Curt # C24VV TriFlex brake controller would wire up to the tow package harness as follows: • Tow Package Red/Green wire connects to Black wire from brake controller pigtail • Tow...
view full answer... - Troubleshooting 7-Way Wiring Missing a Wire on Random Axle Trailer With Brakes.7-way wiring colors can vary on a trailer. The # HM11141144 from your question follows the traditional SAE (See the diagram below) with red for the 12V power instead of black. The purple in this case would be the reverse lights. On the RV standard it would be yellow instead of purple. The only way for you to be sure which wires are which is to trace them back to see where they go. With both a red and black wire, more than likely the black is 12V power and the red is the left turn/stop....
view full answer...
- Parts Needed To Add a Tow Package To a 2024 GMC Canyon First you will need to add the Curt Trailer Hitch Receiver # C78VV to your 2024 GMC Canyon. Do note this will replace a factory crossmember that is used since your Canyon did not come with the factory tow package. Next the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector # HM11141144 will wire to the factory terminated wires under your bed. If you are going to be towing larger trailers with electric actuated brakes you will also want to install a Trailer Brake Controller...
view full answer... - Correct Hopkins Wiring Kit for a 2019 Chevrolet Colorado Without Tow PackageYes, the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector # HM11141144 is the correct wiring kit to get both a 4-Way and a 7-Way on your 2019 Chevrolet Colorado for trailer towing. Attached is an installation video on a 2019 Colorado as well as a photo showing what the end result will look like.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Video by:
Andrew K
Video by:
Jonathan Y
Video by:
Aidan B
Video by:
Schuyler H
Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Installed by:
Cole B
Written by:
Chelsea B
Test Fit:
Randy B
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Bradley B
Updated by:
Wilson B
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John D.
4/5/2024
Still working perfectly with no issue’s! Great product!