Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
(310 reviews)
Price: $117.32
In Stock
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
Item # TDSF
Retail:$171.41
Our Price: $117.32
You Save: $54.09
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (310)
- Q & A (0)
- Photos
- Used (1)
Brophy Camper Tie-Downs - TDSF
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Powder Coated Steel
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.
Features:
- Creates attachment points for securing your camper to your truck bed
- Turnbuckles (sold separately) required to attach camper to tie-downs
- Fits tightly into the stake pocket with built-in spacers
- Spacers can be pried off to give you more wiggle room for installation
- Resists corrosion and rust with black powder coated steel
- Mounts permanently in your truck's stake pockets - drilling required
- Locks tie-downs into the truck bed side rails with metal tabs
- Includes 4 camper tie-downs and installation hardware
- Made in the USA
Specs:
- Application: most full-size, non-dually pickup trucks with straight fenders and single-wall construction (for exact fits, enter in your vehicle's year/make/model above)
- Compatible with drop-in bed liners and side-step beds
- Works with truck bed campers up to 8' long
- Dimensions: see diagrams below
- 1-Year limited warranty
Simple, Secure, and Convenient
Installing these tie-downs is pretty darn simple. They'll just slide into the stake pockets on your truck and you'll drill in some bolts through the pockets and the top of the rail to secure them. They fit snugly and there's no guesswork about where they mount on the rail. Tucked into the stake pockets, they're conveniently out of your way if you want to use your bed for hauling something other than your camper.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches to the anchors on your camper to the tie-downs on your truck to keep your camper secure safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
TDSF CR Brophy Truck Camper Stake Well Tie Downs for Slide In Truck Camper - Bed Mount - 4 Pack
Installation Details
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4 - TDSF
Average Customer Rating: 4.4 out of 5 stars (310 Customer Reviews)
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.by: Nate 05/28/2023
product was well built and easy to install. hold Downs feel very solid as installed on the truck. good value for the money.
by: Francisco06/30/2023
Used these on my 2012 Tundra Crew max Had to put in more effort in the installation then the instruction tell or show.
for example the truck pockets where these slide into I had too cut the plastic that was covering the holes,
I removed the tail light on one side to get the top bolt screwed in.
I had to remove the gas cap and plastic to secure the top bold.
I also added bigger washers cause there are existing hole that hold the factory plastic so the nut couldn't slide out and away.
Other then that these mount work great
by: Ken05/03/2016
I was hesitant about getting these because I wasn't sure if they would fit. I have a '65 Chevy C-10 and was concerned they would not work because any more, everything is about all the new vehicles on the road, not the oldies. But after consulting with the people at etrailer, I ordered them and couldn't have been happier. I did have to remove the metal tabs (they pry off), but after that, I measured, marked, drilled, and installed the tie-downs in about 20 minutes tops. Loaded the camper and the tie downs worked great. Took it camping 4 times so far and the tie downs are still solid as a rock. Thanks etrailer!
by: Gregory01/25/2019
Overall, very simple and easy to install the Brophy tie downs. The hardware was honestly garbage.. weak grade that undoubtedly would not hold up to this weight and movement. Used heavy duty bolts to secure it to bed rails and stake pocket. So far, 200 miles driven in snow without much movement, but a bit worried about the longevity of the tie downs. This camper will stay permanently in the bed of the truck, so I will throw in some through bolts into the bed of the truck (peace of mind). Turn buckles seem to be good (other than a factory snag that sliced me open). So far happy with the product, could have been made a bit better for an extra cost; I definitely would have paid more for a two sided stake pocket bolt through. With only one tab for mounting to top side of bed rails this seems excessively weak.. do you see the gap in the stake pocket? It was seated when drilling and lagging it down. Started to turn under pressure.
by: Patrick P.07/06/2016
Installed easily. Had to us longer bolts for the back two posts on my 2003 Dodge Ram 2500 4X4 Quad Cab. Also, had to trim some the factory plastic bed liner. No big deal. I took it for a test drive and one of the back brackets seems to twist a bit. I loosed the turnbuckles a little and it is better. I guess I had them too tight. I will be taking the camper on a mini-getaway and will add any new developments. So far, very happy with the product!
by: Eric03/03/2024
Not compatible with 99 Ford F-150, even though the description said it was. Stake pockets are double walled on this truck. Bolts too short. Very frustrating.
Jenny N.
3/12/2024
I agree that it needs to be clearer that the stake pockets work with single walled versus double walled side rails. I am having it added to the tech tips. I will have our Customer Service team reach out to you to discuss returning them.
by: Randy05/25/2023
Did not realize they are for a 8’ maximum camper. Mine is 9’6”
Randy E.
5/27/2024
They did not fit my 2021 Ram Stake pockets . Hope to get rid of them sometime in the future
by: Drew09/04/2022
Didn't fit my truck. Customer service was greT though in getting me the correct frame mount brackets for tie downs.
Drew
9/5/2023
Excellent no issues
by: Matthew 05/09/2024
Fast perfect fit
MADE IN USA
by: John08/20/2023
Not strong enough, on a rough 1 mile dirt road to get into the ranch we stay at, the rocking twisted the Brophys. Had a local Albuquerque trailer dealer install heavier duty frame mounted tie downs.
by: James03/24/2022
Told the would fit my truck but they did not. Thru them in scrap pile
Jenny N.
3/31/2022
I see that you had contacted us and advised that you had a 2010 F 150 truck that was built in September of 2010. There are cases where a late in the model year build is actually the next years build which means that the 2010 would have a 2011 frame design. Since these tie downs only fit up to 2010, it would cause a non fit for you. You will want to reach out to Ford to confirm the build design year of your truck.
by: David R03/17/2024
I like the tie dowms,don't have new truck yet to see how they fit.
by: Andrew03/31/2018
After a few slight modifications the brophy camper tie downs worked like a champ!
by: Ryan05/30/2023
Good product. Only problem is with packaging, the painted black parts should be wrapped to prevent chipping which exposes the bare metal. Box contained stacked parts which were banging around in the box resulting in chipped paint...early deterioration potential from rust, and not new appearance.
by: Richard09/25/2023
It bent under load
Jenny N.
9/27/2023
I wanted to ask you a few more questions about the tie downs. Do you still have them? How much weight would you estimate your camper weighs? These tie downs are meant to be used for campers up to 8 feet long, including any cab over portion. They are not meant to be used with 2011 and newer trucks.
by: Phill S.08/24/2015
The stake pockets were easy to install with the hardware provided. The dealer I purchased my camper from asked where I had gotten the mounts and I told him about etrailer.com and he was impressed with the mount and tie-down package as an economical package. My only wish was that the powder-coating on the mounts would have been a little nicer, or the packaging a little better. There was a noticeable amount of nicks and scratches in the paint that detract from the appearance. Nothing that affects performance, just cosmetic appeal.
Phill S.
8/31/2016
The Tie-down brackets and tie-down hardware kit are working fine. They are a good, inexpensive solution for securing my camper to my pick-up.I appreciate the follow-up. You folks are great to work with.
by: Jim K.10/15/2016
This set of Brophy stake pocket tie downs came with a note in the instructions that they would not work for any vehicle newer than a 2011. My RAM 2500 has the ABS bed caps on the side. I removed them and enlarged the stake pocket holes using the pre-stamped template on the bed caps. Once I reinstalled the bed caps, the camper tie downs dropped into the stake pockets. I had read other reviews that the lag bolts were prone to stripping out. So I drilled 3/8" holes through the bedside and through the camper tie downs. Then I welded a 3/8" nut on the backside of the camper tie downs. Now all is well and secure. I think this is a good product, and I prefer it over the Brophy camper tie downs that clamp to the lip of the bed. I just wish there was a securement method that didn't involve lag bolts.
Jim K.
10/17/2017
Im still very pleased with the product
by: Dennis03/29/2018
Great for use on the 85 Chevy dually. Fit was ok, held the medium four star camper pretty good. Not sure if want them holding a medium or large camper on a newer truck, the thick sheet metal on the old trucks aide the brackets. The brackets themselves are sturdy and I bet would not been before the truck or camper broke in half.
Dennis B.
3/30/2019
Great, finish is durable. Still function properly, did not cause wear on the truck
by: Trinity11/24/2022
Quality parts, however the mounting holes were not usable. Had to drill new holes in the rear set, also had to use self tapping screws instead of the hardware that was supplied.
Jenny N.
11/25/2022
You mentioned that the mounting holes were not usable and I wanted to see if you could explain in more detail what you mean? Would you be able to send pictures?
by: Adam08/30/2022
I have a large truck bed camper on my 1991 Dodge W250 that I tried these on. I went this route because I didn't want to spend $2k on Torklift mounts and Fastguns. These came on time and installed super easy, but just had too much flex for me to be comfortable with the size of my load. Ended up going the Torklift route and couldn't be happier. This is a decently made product, just not for me.
by: Joe D06/20/2020
Great product and reasonably priced.
I made a few modifications because I didn’t think they were secure enough on the truck
They are now bolted on in 2 places to ease my mind. Pics attached
by: Dave08/24/2022
Stout materials, but they dont fit the stake pocket very well. They are loose in the pocket and are expected to be held in place with a few screws/bolts. Mine tilted to one side when tightening the turnbuckles to hold it in place, and dented the top rail of the bed. Next time I will use a frame mounted system.
by: Michael11/04/2022
They don't seem to be rigid enough. They bent really bad when I was on a rough road. That caused the camper to be loose which wasn't good for my taillights.
by: DB03/19/2014
The tie downs arrived quickly and were what I expected them to be with a reasonable price. My only suggestion might be to sell them in pairs instead of 4's. I have an application where I only need 2....Otherwise the etrailer site has worked very well for me.
Db
3/20/2015
Still love etrailer. The tie downs turned to be at the wrong angleposition for my camper so I went another route. But the mistake was mine, so Im keeping them, I have a friend who intends to use them.
by: Howard 08/12/2022
WOW - MUCH better than attaching my big cab-over camper to the bumper with chains in the back and a welded piece of 2X2 square tubing attached to the frame in the front.
Very easy to install - just had to go get a couple drill bits - no big deal. These tie-downs will be much stronger than any S-hooks or turn-buckles could possibly bend.
I did use threaded connecting links rather than S-hooks - I think they will hold better.
25
310
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- Will the Brophy Stake Pocket Mounted Camper Tie Downs Work W/ A 2022 Toyota Tundra?Yes, the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are a universal part that'll fit most full-size, non-dually pickup trucks with straight fenders and single-wall construction, so these'll work fine with your truck.
view full answer... - Camper Tie Downs Fits for 2008 Ford F-150 5.5-ft Short BedThe camper tie down kits confirmed to fit your 2008 Ford F-150 short bed can be seen on the linked page by selecting your specific configuration from the drop-down menu tool at the top of the page. The Brophy stake pocket tie downs # TDSF work only with full-size trucks.
view full answer... - Camper Tie Downs for a 2001 Ford F150 SuperCrewHappijac doesn't have a fit for the Supercrew models at this time. I wish they did, but due to the age of the truck I wouldn't be inclined to think they will offer one eventually.
view full answer... - Fitment of Brophy Stake Pocket Mounted Camper Tie Downs 2020 Toyota TacomaThe Brophy Stake Pocket Mounted Camper Tie Downs, # TDSF will work with your 2020 Toyota Tacoma. This comes with 3 removable spacers to allow a tight fit in your stake pockets. I recommend the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs, # TDHP. This turnbuckle will expand from 7-5/8 inches to 20 inches and with the included chain and S hook can reach up to 19-3/4 inches.
view full answer... - Is There a Set of Brophy Camper Tie Downs that Fit 2004 Chevy SilveradoFor your 2004 Chevy Silverado we have a set of Brophy camper tie downs that fit with the part # TDSF but the HSAB is not the correct fit.
view full answer... - Camper Tie Downs for a 2005 Dodge Ram DuallyThe Brophy camper tie downs, # HSSF, fit most domestic full size trucks, but there is not a specific vehicle list that they will fit. You will have to go by the measurements of the tie downs and the installation instructions to determine if they will fit your 2005 Dodge Ram Dually. I have included some pictures that should help. We also have some stake pocket mount tie downs that could fit, # TDSF. With either tie down kit, you can use the Camper Tie Down Hardware Package, # TDHP.
view full answer...
- Brophy Camper Tie Down Recommendation for a 2015 Ford F-250The Brophy Camper Tie Downs, part # TDSF can be used on campers that have a total length of up to 8 feet in length. The Brophy Camper Tie Downs, part # HSSF can be used on any size campers. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your 2015 Ford F-250. The Brophy # TDSF mounts into the truck bed stake pocket, where as the Brophy # HSSF tie downs wrap around the bed, not in the stake pockets, and are...
view full answer... - Camper Tie-Down Recommendation for a 2009 Ford F-150There's no reason the Brophy Camper Tie Downs part # TDSF wouldn't work on your 2009 Ford F-150. As long as your camper is less than 8 feet long this kit would work well for you. The recommended hardware kit to install either tie down kit is Camper Tie Down Hardware Package, # TDHP.
view full answer... - Will Brophy Camper Hold Downs # HSSF Fit a 2011 Chevrolet Silverado Extended Cab, Long BedThe Brophy Camper Hold Downs, part # HSSF, will fit your 2011 Chevrolet Silverado extended cab, long bed as long as you do not have a slide-in bed liner. They will work with a spray-in bed liner. There is not a weight capacity rating for these hold downs and they are designed to work for any camper that is a correct fit for your vehicle. The hold downs do not fit in the stake pockets but wrap around the bed rails and are mounted inside the bed. If you are wanting to use a stake pocket...
view full answer... - Camper Hold Down Recommendation for a 1998 GMC C/K 1500 Series Short BedThe Stake Pocket Camper Tie Downs, # TDSF, are not for use on 1988 or newer Chevrolet or GMC trucks. Instead, I recommend the Camper Hold Downs, # HSSF. These wrap around the bed instead of fitting in the stake pockets. I also recommend the Camper Tie Down Hardware Package, # TDHP.
view full answer... - Recommended Camper Tie Down For North Star 600ss On 2017 Toyota TacomaI reached out to Torklift and they have never had a fit for a Toyota Tacoma because their hitches are for capacities greater than that size truck can handle. This means that the camper tie downs compatible with their hitch will not work for you due to the lack of a hitch compatible with your vehicle. For your 2017 Toyota Tacoma, I recommend the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSAB. These tie downs clamp into the bed rail of your truck...
view full answer...
- Camper Tie Downs for a 1999 Ford F-150Since you will be putting on and taking of a camper shell and camper in your 1999 Ford F-150 I recommend going with custom fit frame mounted tie downs. This will allow you to easily remove the arms of the tie downs, while leaving the frame mounts in place, for when you want to put on the camper shell. These are going to be the best and easiest. They are also more expensive than bed tie downs and you will need to use the following link and drop down menu to select the option closest to your...
view full answer... - Camper Tie Down Recommendation for a 2003 Toyota TundraFor your 2003 Toyota Tundra you would want the Tie-Downs part # TDSF. We had a customer use these on his 2005 Tundra (same generation as yours) and let us know that they worked very well for him. The # HSSF that you referenced is a universal kit that could work for your truck, but we don't have fit information for this kit so your best option would be the # TDSF since we know it would work for you. You also will want the Camper Tie Down Hardware Package, # TDHP.
view full answer... - Recommended Camper Tie-Downs For A 2019 Arctic Fox Model 865 In A 2000 Ford F-250 Super Duty The Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are meant for campers only up to 8' so you wouldn't be able to safely tie down your 2019 Arctic Fox Model 865 Truckbed Camper. Instead I recommend the HappiJac Truck-Mounted Camper Tie-Downs # LC182910-182971 with the HappiJac Original Turnbuckles for Camper Tie-Downs # LC182898. These custom-fit camper tie-downs permanently mount to your truck's body to distribute the weight of your camper and limit movement in all directions. Low-profile...
view full answer... - Will Brophy Stake Pocket Camper Tie Downs # TDSF Fit 2008 Chevrolet Silverado Crew CabThe Brophy Stake Pocket Camper Tie Downs, part # TDSF, will fit most full-size pickups with straight fenders and single-wall construction. These will install permanently in the stake tubes. Installation requires drilling to secure each tie down to the top of the bed rail (with included hardware). The Brophy # HSSF Camper Hold Down does not require drilling for installation. However, the HSSF requires a minimum of 2-inches underneath the lip of the bed rail for installation of the supporting...
view full answer...
- Brophy Camper Tie Down Recommendation for 2006 Ford F-350 DuallyYes, the # TDSF Brophy camper tie downs are a universal fit for full-size trucks and they will work great on your 2006 Ford F-350 dually. You'll also want the hardware kit part # TDHP to attach the camper to the tie downs.
view full answer... - Truck Bed Camper Tie Down Recommendations for a 2013 Ford F-150The Brophy Camper Tie Downs, part # TDSF can be used on campers that have a total length of up to 8 feet in length. The Brophy Camper Tie Downs, part # HSSF can be used on any size campers. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your 2013 Ford F-150. The Brophy # TDSF mounts into the truck bed stake pocket, where as the Brophy # HSSF tie downs wrap around the bed, not in the stake pockets, and are...
view full answer... - Will TDSF Camper Tie Downs Fit 1995 Dodge Ram 2500 Long BedYes, the stake pocket camper tie downs, # TDSF, will work on the 1995 Dodge Ram 2500, as long as the overall length of the camper you are using them with is 8 feet long or less, this measurement includes the overhang over the cab of the truck. You will need to drill one 11/32 inch hole and two 7/32 inch holes for this installation, and there are spacer tabs on the tie downs that may need to be pried off for a proper fit in your stake pockets. If your truck campers overall length is longer...
view full answer... - Which Brophy Camper Tie Downs For 2000 Ford F-350 DuallyThe # HSSF should work well as a tie down system for your 2000 Ford F-350. But you may want to check out # TDSF to see which would work better for your application because you have a dually model. I contacted our representative at Brophy about the differences between the Tie Down Anchor, part # TDSF, and the Camper Tie Down, part # HSSF in the past and which is better for dually models. Part # TDSF can be used on campers that have a total length of up to 8 feet in length. Part # HSSF...
view full answer... - Recommended Truck Camper Tie-Down Kit for 2000 Ford F-250 with Lance Squire CamperThe truck camper tie-downs offered for your 2000 Ford F-250 can be seen on the linked page. All options are from TorkLift and the correct one for you depends on your bed length and the presence of other equipment such as steps or a hitch. At the top of the page there is a drop-down menu bar you can use to select your truck version. For example, if you have a 8-foot bed, no board or step under the bed and are using an aftermarket hitch receiver, then the correct camper tie down kit consists...
view full answer... - Is the HSSF or the TDSF Slide In Camper Tie Down a Fit for 2012 SilveradoAccording to CR Brophy, the TDSF camper tie-down you refer to is not compatible with GM trucks after the 1988 model year. My contact tells me that the HSSF tie downs are indeed compatible with a 2012 Silverado. If you look at the provided photo, you will get a better idea of how the tie downs attach to the top of the bed rail. The tie downs do not have a specified weight rating, but they are more than strong enough to handle any slide-in camper that will physically fit in your truck bed.
view full answer...
- Recommended Camper Tie-Downs For A 2006 Toyota Tundra Double Cab The manufacturer, C.R. Brophy, only tested the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF on full-sized American made trucks so we do not have a confirmation that they will work. There is also the stipulation that they'll only work with a truck bed camper with a total length up to 8', so I don't believe these would be the best option for your Tundra. Instead I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2301 with the TorkLift Custom Frame-Mounted...
view full answer... - Recommended Camper Tie Downs and Turnbuckles for 2007 Ford RangerThe Brophy Stake Pocket Mounted Camper Tie Downs # TDSF you asked about can work for your 2007 Ford Ranger but are not a custom fit. These are universal fit options. The Brophy Clamp On Camper Tie-Downs - Bed Mount # HSAB or # HSSF are also universal fit options. The only confirmed fit we have for a custom fit on your truck is the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2013 and rear # TLR3500 (or rear # TLF3004 if you have the TorkLift hitch). These are confirmed...
view full answer... - Recommended Camper Tie Downs for 2013 Ford F150According to my contact at CR Brophy, the # TDSF tie downs are not compatible with 2011 or newer trucks, but their # HSSF tie-downs would indeed be compatible with your truck, as long as it has a regular (not stepside) bed. Drop in (hard plastic) bed liners will need to be extensively trimmed but spray-on liners are not a problem. You will also need a hardware package, part # TDHP. If installing the camper causes the rear of the truck to squat, a suspension enhancement product like the...
view full answer...
Do you have a question about this Camper Tie-Down?
Used Items Available
Condition: Surface Scratches
Notes: Item has cosmetic surface scratches.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Patrick B
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Amanda K
Installed by:
Matthew K
Installed by:
Cole B
Video by:
Amber S
Test Fit:
Michael H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Nate
6/4/2024
product is still working fine a year and 2 trips to Canada later. I used the stake pocket hold downs because my truck bed was rusted out where the clamp on hold downs would normally go. it works just fine.