Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars - 1" D-Rings

See what our Experts say about this Blue Ox Base Plates

• D Ring Tow Bar Adapters And Flat Tow Setup For 2017 Jeep Wrangler
  Great question. The only adapter we have that will work with a Ready Brute is the Blue Ox Base Plate Adapter Brackets for Ready Brute Elite Tow Bars # BX88297. This adapter, will work with the tow bar but won't work with the D-rings. You would need a blue ox base plate. For me to get you the proper base plate I would need more information about your bumper and some pics of it. We have two sizes of D-ring adapters 1 inch and 3/4 inch. Two examples of this would be the Adapter for Jeep...
  view full answer...
• How To Attach Blue Ox Tow Bar To 1" D-Rings On Jeep Bumper
  It sounds like you're looking for the Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars part # BX88358 which are designed for Blue Ox motorhome mounted tow bars and bumpers with a 1" thick d-ring. I have attached a video I did on these below as well.
  view full answer...
• Complete Flat Towing Setup For A 2007 Jeep Wrangler With A DV8 Bumper With A Winch
  The good news is yes, you can use your DV8 bumper with a winch on your 2007 Jeep Wrangler to flat tow your vehicle. You'll just need to use an adapter like the Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars # BX88357, which has a 7/8" diameter pin, or the Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars # BX88358; You will just need to verify the size pin you need for your DV8 bumper. Secondly, if you were to install a lift kit, and go with...
  view full answer...
• Can A 2021 Ford Bronco With Modular Bumper Be Flat Towed From By The D-Rings
  I believe you're referring to the modular bumper on the 2021 Ford Bronco. From what I can find the D-Rings are only meant for recovery purposes and aren't currently listed as being rated to tow from. This could be outdated information though so I recommend reaching out to your local Ford dealer just to be sure that the specific model you have is capable of being towed from the D-Rings. If not, then the correct baseplate for the modular bumper is the Blue Ox Base Plate Kit # BLU23XR, which...
  view full answer...
• Adapter to Flat Tow Jeep Wrangler with 1 inch D-Ring with Blue Ox Tow Bar
  Yes, since you have a 1 inch d-ring on your off-road bumper and a Blue Ox tow bar you can use a D-ring adapter like the Blue Ox 1-inch D-ring adapter part # BX88358 and you'd be set.
  view full answer...
• Recommended Flat Towing Set Up for a 2023 Jeep Wrangler w/ LOD Bumper
  Congrats on the new Jeep! It looks like the LOD signature bumper comes with the Blue Ox Off-Road Bumper Adapters item # BX88358 that fit the 1" D-rings so you will want to get a Blue Ox tow bar. I have linked a picture of the adapter below so you can confirm you have one. If not this is the one you will need to purchase, item # BX88358. For a compatible tow bar I recommend the Blue Ox Ascent Non-Binding Tow Bar item # BX4370. This tow bar features non-binding latches and a swivel function...
  view full answer...
  
• What Width Mounting Tabs Does Blue Ox Tow Bar Adapter for Hammerhead/Fab Fours Bumpers Fit
  The adapter you mentioned # BX88358 will work for you as we have checked with Blue Ox and this can fit tab widths of 3/4 inch wide, 7/8 inch wide, and 1 inch wide with 1 inch diameter pin holes. The distance between the arms is 1 inch.
  view full answer...
• Recommended Flat Towing Set Up for a 2005 Jeep TJ
  We have three different options for base plates depending on what kind of bumper your 2005 Jeep TJ has. If you have the double tube bumper or standard factory bumper you will want the Blue Ox Base Plate Kit item # BX1120. If you have an off-road bumper with flat towing rated d-rings you will need either the 7/8" D-Rings item # BX88357 or the 1" D-Rings item # BX88358 depending on how wide your Jeep's D-Rings are. The rest of the parts you will need to flat tow your 2005 Jeep TJ are listed...
  view full answer...
• Length of Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars
  For a Blue Ox tow bar, we have the one length of 6-1/8" for either the 1" D-Rings, # BX88358 or the 7/8" D-Rings, # BX88357.
  view full answer...
• Base Plate Solution for 2017 Jeep Wrangler Jurassic Park with Oedro Bumper and D-Rings
  That's actually a bumper that your 2017 Jeep Wrangler Unlimited Jurassic Park edition did not come with from the factory so you would need to go a different route. What you have is an Oedra bumper. Since your aftermarket bumper has D-rings you'd need to go with the D-ring base plate kit adapters like the part # BX88358. This kit fits 1 inch D-rings like it looks like your bumper has. If instead you have 7/8 inch D-rings you'd want the part # BX88357.
  view full answer...
  
• D-Ring Adapter For Blue Ox Tow Bar on Jeep Wrangler
  Thanks for that photo, and since you have a bumper with D-ring attachments, you would not need base plates; in fact, base plates wouldn't be able to be installed, so instead you would need a bumper adapter that attaches to the D-ring attachments. Your bumper does need to be rated for flat towing so you'll need to check with the manufacturer to ensure that if you're not certain, but if it is, and if the bumper has a 1" or 7/8" pin hole and the tab is 3/4", 7/8", or 1" then what you will...
  view full answer...
  
• Cleanest Looking Base Plate for my 2019 Jeep Wrangler Moab Edition
  Of the two option I have available the Roadmaster Direct-Connect Base Plate Kit part # RM-521453-5 and the Demco Tabless Base Plate Kit part # DM9519339 I really like the look of the Demco model. While it does add more to the front of the vehicle it does it in a very nice factory look. This has all of the attachment points and will keep you from having a pieced together look. When not in use the arms are removable for an even cleaner look. To use this with your Aventa II tow bar use the...
  view full answer...
• Recommended Blue Ox D-Ring Adapters For 1" D-Rings
  You'll first want to verify with the manufacturer that the bumper is rated for flat towing before actually using the D-Rings for this purpose. Since D-Ring adapters are only compatible with motorhome-mounted tow bars and would not work with your coupler-style mounted Blue Ox Acclaim # BX4330 you would need to get a different tow bar and 1" adapters # BX88358. For the tow bar you could use the Blue Ox Alpha 2 Non-Binding Tow Bar # BX7380.
  view full answer...
• Recommended Blue Ox Base Plate for a 2002 Jeep Wrangler TJ
  Yes, it is. To add a Blue Ox base plate to your 2002 Jeep Wrangler TJ you will want item # BX1120. This base plate kit works with both the double tube bumper or standard factory bumper. It is compatible with Blue Ox tow bars like the item # BX4330 you were looking at. There are also two D-ring adapters that will work with Blue Ox tow bars incase you are trying to flat tow with an aftermarket bumper. They are the 7/8" Off-Road Bumper Adapter item # BX88357 and the 1" Aftermarket Bumper...
  view full answer...
• Blue Ox Aftermarket Bumper Adapter Fitment
  If your Jeep has an aftermarket bumper installed with 15/16" holes (0.9375). The Blue Ox Aftermarket Off-Road Bumper Adapter - 7/8" Pin, # BX88357, is identified with a nominal hole diameter of 7/8". It specifically states minimum of 0.871" and max hole diameter of 0.934", negligible difference. I suggest verifying the actual of diameter of your specific bumper for fitment. There is the option of using the # BX88358 in 1" diameter (min hole diameter of 0.996", max of 1.06") and reaming...
  view full answer...
• Is There a Base Plate Kit for a 2018 Jeep JL Wrangler Unlimited with Better Ground Clarence
  The only option you really have would be to remove the base plate from the vehicle and install an aftermarket bumper with d-rings which is rated for flat-towing. This would then allow you to use an adapter with your tow bar like the Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars part # BX88357 or part # BX88358 and have much better ground clearance. Unfortunately, there's really no such thing as a removable base plate kit and there aren't any other options with...
  view full answer...
• Will Blue-Ox Base Plate Kit Fit Jeep with Warn Elite Full Width Bumper
  I wouldn't be able to confirm fit of a base plate kit with the Warn Elite Full Width Bumper but since it has d-rings you can use the Blue Ox Aftermarket Off-Road Bumper Adapter part # BX88357 for 7/8" pins or part # BX88358 for 1" pins.
  view full answer...
• Can 2008 Jeep Wrangler with Smittybilt Stryker Bumper be Flat Towed
  The Smittybilt Stryker bumper has D-rings on it so yes it can be flat towed as long as you pick out the correct D-ring adapter. If they are 7/8 inch then the correct kit is the part # BX88357 that you referenced or if they are 1 inch you'd need the # BX88358. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible tow bars is the Blue Ox Avail # BX7420 which comes...
  view full answer...
• Can Off-Road Bumpers for 2018 Jeep JL Wrangler Unlimited be Flat Towed with
  We don't have a list of bumpers that fit your vehicle that can be flat towed with. Your best solution would be to check with the manufacturer of the bumpers you are interested in to see if they will state it's okay to flat tow with them. Most likely you'd need to use a D-Ring adapter like the part # BX88358 which fits 1 inch D-rings.
  view full answer...
• Do the Blue Ox Aftermarket Bumper Adapters Have a Weight Capacity
  The Blue Ox Aftermarket Bumper Adapter part # BX88358 (1" Pin) and part # BX88357 (7/8" Pin) are an excellent option to attach a motorhome mounted Blue Ox Tow Bar such as the Blue Ox Ascent Tow Bar part # BX4370 to an aftermarket bumper with welded-on d-rings. The adapters don't have any sort of weight capacity but they can handle enough for any of the motorhome mounted tow bars they are designed to be used with so there should be no problems here.
  view full answer...
• Base Plate Kit for Towing 2016 Jeep JK Wrangler w/Stock Bumper with a Blue Ox Tow Bar
  If you are talking about D-Rings on your 2016 Jeep JK Wrangler OEM bumper then you simply need to measure the distance between your bumper mounts. If it is 7/8" then use part # BX88357 but if it is 1" use part # BX88358 instead. If you have the OEM bumper and want a base plate kit the correct one for your Blue Ox tow bar is part # BX1126 on our site. This is compatible as long as you don't have the Hard Rock Edition of a 75th Anniversary model. I have attached an installation video and...
  view full answer...
  
• Recommended D-Ring Adapters For Flat Towing A 2019 Jeep Wrangler Unlimited
  The Curt Rambler Steel Tow Bar for Curt and Blue Ox Base Plates # C26FR that you purchased is only going to work with a Curt or Blue Ox baseplate. While we don't currently sell an aftermarket bumper that's rated to tow from for your 2019 Jeep Wrangler Unlimited, there are options out there. You'll just want to confirm with the manufacturer ahead of purchase that it is rated for flat towing. Smittybilt is a commonly used company for these types of bumpers. One you have a new bumper that's...
  view full answer...
• Off-Road Bumper Adapters For Flat Towing a 1997 Jeep Wrangler TJ
  Currently none of the aftermarket bumpers we carry are rated for flat towing with your 1997 Jeep TJ. We only carry the adapters for either Blue Ox or Roadmaster tow bars which will allow you to connect to an aftermarket bumper which is rated for flat towing. Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars - 7/8" D-Rings # BX88357 Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars - 1" D-Rings # BX88358 Adapter for Jeep D-Ring Bumper Mounts...
  view full answer...
• Flat Tow Base Plate Kit for 2016 Jeep Wrangler Unlimited With Front Mount Trailer Hitch Receiver
  The Blue Ox Base Plate Kit, # BX1126 for 2016 Jeep Wrangler Unlimited can not be installed simultaneously with a Curt, # 31432 or similar front mount trailer hitch receiver as they each occupy the same space beneath the front of the Jeep. We have been asked this question previously with the goal being to have a front mount hitch for purpose of installing a winch. If this is your objective too, the best option is to replace the front bumper with an aftermarket model that tow rated with...
  view full answer...

Do you have a question about this Base Plate?